ATF eRegulations

Searching for “Importer”

• § 478.125a Personal firearms collection.

  (a) Notwithstanding any other provision of this subpart, a licensed manufacturer, licensed importer, or licensed dealer is not required to comply with the provisions of § 478.102 or record on a firearms transaction record, Form 4473, the sale or other disposition of a firearm maintained as part of the licensee's personal firearms collection: Provided, That

• § 478.125 Record of receipt and disposition.

  (e) Firearms receipt and disposition by dealers. Except for adjustment or repair of a firearm that is returned to the person from whom it was received on the same day, each licensed dealer shall enter into a record each receipt and disposition of firearms. In addition, before commencing or continuing a firearms business, each licensed dealer shall inventory the firearms possessed for such business and shall record the same in the record required by this paragraph. The record required by this paragraph shall be maintained in bound form in the format prescribed below. The purchase or other acquisition of a firearm shall, except as provided in paragraphs (g) and (i) of this section, be recorded not later than the close of the next business day following the date of such purchase or acquisition. The record shall show the date of receipt, the name and address or the name and license number of the person from whom received, the name of the manufacturer and importer (if any), the model, serial number (including any associated license number either as a prefix, or if remanufactured or imported, separated by a semicolon), type, and the caliber or gauge of the firearm. In the event the licensee records a duplicate entry with the same firearm and acquisition information, whether to close out an old record book or for any other reason, the licensee shall record a reference to the date and location of the subsequent entry ( e.g., date of new entry, book name/number, page number, and line number) as the disposition. The sale or other disposition of a firearm shall be recorded by the licensed dealer not later than seven days following the date of such transaction. When such disposition is made to a nonlicensee, the firearms transaction record, Form 4473, obtained by the licensed dealer shall be retained, until the transaction is recorded, separate from the licensee's Form 4473 file and be readily available for inspection. When such disposition is made to a licensee, the commercial record of the transaction shall be retained, until the transaction is recorded, separate from other commercial documents maintained by the licensed dealer, and be readily available for inspection. The record shall show the date of the sale or other disposition of each firearm, the name and address of the person to whom the firearm is transferred, or the name and license number of the person to whom transferred if such person is a licensee, or the firearms transaction record, Form 4473, transaction number if the licensed dealer transferring the firearm sequentially numbers the Forms 4473 and files them numerically. The format required for the record of receipt and disposition of firearms is as follows:

• § 478.37 Manufacture, importation and sale of armor piercing ammunition.

  No person shall manufacture or import, and no manufacturer or importer shall sell or deliver, armor piercing ammunition, except:

• § 478.121 General.

  (b) ATF officers may, for the purposes and under the conditions prescribed in § 478.23, enter the premises of any licensed importer, licensed manufacturer, licensed dealer, or licensed collector for the purpose of examining or inspecting any record or document required by or obtained under this part. Section 923(g) of the Act requires licensed importers, licensed manufacturers, licensed dealers, and licensed collectors to make such records available for such examination or inspection during business hours or, in the case of licensed collectors, hours of operation, as provided in § 478.23.

• § 478.23 Right of entry and examination.

  (a) Except as provided in paragraph (b), any ATF officer, when there is reasonable cause to believe a violation of the Act has occurred and that evidence of the violation may be found on the premises of any licensed manufacturer, licensed importer, licensed dealer, or licensed collector, may, upon demonstrating such cause before a Federal magistrate and obtaining from the magistrate a warrant authorizing entry, enter during business hours (or, in the case of a licensed collector, the hours of operation) the premises, including places of storage, of any such licensee for the purpose of inspecting or examining:

• § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation.

  The provisions of §§ 478.37 and 478.99(d) with respect to the manufacture or importation of armor piercing ammunition and the sale or delivery of armor piercing ammunition by manufacturers and importers shall not apply to the manufacture, importation, sale or delivery of armor piercing ammunition for the purpose of testing or experimentation as authorized by the Director. A person desiring such authorization to receive armor piercing ammunition shall submit a letter application, in duplicate, to the Director. Such application shall contain the name and addresses of the persons directing or controlling, directly or indirectly, the policies and management of the applicant, the nature or purpose of the testing or experimentation, a description of the armor piercing ammunition to be received, and the identity of the manufacturer or importer from whom such ammunition is to be received. The approved application shall be submitted to the manufacturer or importer who shall retain a copy as part of the records required by subpart H of this part.

• § 478.12 Definition of Frame or Receiver.

  (d) Multi-piece frame or receiver. The term “multi-piece frame or receiver” shall mean a frame or receiver that may be disassembled into multiple modular subparts, i.e., standardized units that may be replaced or exchanged. The term shall not include the internal frame of a pistol that is a complete removable chassis that provides housing for the energized component, unless the chassis itself may be disassembled. The modular subpart(s) identified in accordance with § 478.92 with an importer's or manufacturer's serial number shall be presumed, absent an official determination by the Director or other reliable evidence to the contrary, to be part of the frame or receiver of a weapon or device.

• § 478.29 Out-of-State acquisition of firearms by nonlicensees.

  No person, other than a licensed importer, licensed manufacturer, licensed dealer, or licensed collector, shall transport into or receive in the State where the person resides (or if a corporation or other business entity, where it maintains a place of business) any firearm purchased or otherwise obtained by such person outside that State: Provided, That the provisions of this section:

• § 478.34 Removed, obliterated, or altered serial number.

  No person shall knowingly transport, ship, or receive in interstate or foreign commerce any firearm which has had the importer's or manufacturer's serial number removed, obliterated, or altered, or possess or receive any firearm which has had the importer's or manufacturer's serial number removed, obliterated, or altered and has, at any time, been shipped or transported in interstate or foreign commerce.

• § 478.128 False statement or representation.

  (b) Any person other than a licensed manufacturer, licensed importer, licensed dealer, or licensed collector who knowingly makes any false statement or representation with respect to any information required by the provisions of the Act or this part to be kept in the records of a person licensed under the Act or this part shall be fined not more than $5,000 or imprisoned not more than 5 years, or both.