§ 478.1 Scope of regulations.
-
a.(a) General. The regulations contained in this part relate to commerce in firearms and ammunition and are promulgated to implement Title I, State Firearms Control Assistance (18 U.S.C. Chapter 44), of the Gun Control Act of 1968 (82 Stat. 1213) as amended by Pub. L. 99-308 (100 Stat. 449), Pub. L. 99-360 (100 Stat. 766), Pub. L. 99-408 (100 Stat. 920), Pub. L. 103-159 (107 Stat. 1536), Pub. L. 103-322 (108 Stat. 1796), Pub. L. 104-208 (110 Stat. 3009), and Pub. L. 105-277 (112 Stat. 2681).
-
b.(b) Procedural and substantive requirements. This part contains the procedural and substantive requirements relative to:
-
1.(1) The interstate or foreign commerce in firearms and ammunition;
-
2.(2) The licensing of manufacturers and importers of firearms and ammunition, collectors of firearms, and dealers in firearms;
-
3.(3) The conduct of business or activity by licensees;
-
4.(4) The importation of firearms and ammunition;
-
5.(5) The records and reports required of licensees;
-
6.(6) Relief from disabilities under this part;
-
7.(7) Exempt interstate and foreign commerce in firearms and ammunition; and
-
8.(8) Restrictions on armor piercing ammunition.
-
§ 478.2 Relation to other provisions of law.
The provisions in this part are in addition to, and are not in lieu of, any other provision of law, or regulations, respecting commerce in firearms or ammunition. For regulations applicable to traffic in machine guns, destructive devices, and certain other firearms, see Part 479 of this chapter. For statutes applicable to the registration and licensing of persons engaged in the business of manufacturing, importing or exporting arms, ammunition, or implements of war, see section 38 of the Arms Export Control Act (22 U.S.C. 2778) and regulations thereunder and Part 447 of this chapter. For statutes applicable to nonmailable firearms, see 18 U.S.C. 1715 and regulations thereunder.
§ 478.11 Meaning of terms.
-
When used in this part and in forms prescribed under this part, where not otherwise distinctly expressed or manifestly incompatible with the intent thereof, terms shall have the meanings ascribed in this subpart. Words in the plural form shall include the singular, and vice versa, and words importing the masculine gender shall include the feminine. The terms "includes" and "including" do not exclude other things not enumerated which are in the same general class or are otherwise within the scope thereof.
-
Act. 18 U.S.C. Chapter 44.
-
Adjudicated as a mental defective.
-
a.(a) A determination by a court, board, commission, or other lawful authority that a person, as a result of marked subnormal intelligence, or mental illness, incompetency, condition, or disease:
-
1.(1) Is a danger to himself or to others; or
-
2.(2) Lacks the mental capacity to contract or manage his own affairs.
-
-
b.(b) The term shall include—
-
1.(1) A finding of insanity by a court in a criminal case; and
-
2.(2) Those persons found incompetent to stand trial or found not guilty by reason of lack of mental responsibility pursuant to articles 50a and 72b of the Uniform Code of Military Justice, 10 U.S.C. 850a, 876b.
-
-
-
Admitted to the United States for lawful hunting or sporting purposes.
-
a.(a) Is entering the United States to participate in a competitive target shooting event sponsored by a national, State, or local organization, devoted to the competitive use or other sporting use of firearms; or
-
b.(b) Is entering the United States to display firearms at a sports or hunting trade show sponsored by a national, State, or local firearms trade organization, devoted to the competitive use or other sporting use of firearms.
-
-
Alien. Any person not a citizen or national of the United States.
-
Alien illegally or unlawfully in the United States. Aliens who are unlawfully in the United States are not in valid immigrant, nonimmigrant or parole status. The term includes any alien—
-
a.(a) Who unlawfully entered the United States without inspection and authorization by an immigration officer and who has not been paroled into the United States under section 212(d)(5) of the Immigration and Nationality Act (INA);
-
b.(b) Who is a nonimmigrant and whose authorized period of stay has expired or who has violated the terms of the nonimmigrant category in which he or she was admitted;
-
c.(c) Paroled under INA section 212(d)(5) whose authorized period of parole has expired or whose parole status has been terminated; or
-
d.(d) Under an order of deportation, exclusion, or removal, or under an order to depart the United States voluntarily, whether or not he or she has left the United States.
-
-
Ammunition. Ammunition or cartridge cases, primers, bullets, or propellent powder designed for use in any firearm other than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non-metallic shotgun hull or casing not having a primer.
-
Antique firearm.
-
b.(b) Any replica of any firearm described in paragraph (a) of this definition if such replica:
-
1.(1) Is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition; or
-
2.(2) Uses rimfire or conventional centerfire fixed ammunition that is no longer manufactured in the United States and that is not readily available in the ordinary channels of commercial trade; or
-
-
c.(c) Any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol that is designed to use black powder, or a black powder substitute, and that cannot use fixed ammunition. For purposes of this paragraph (3), the term "antique firearm" does not include any weapon that incorporates a firearm frame or receiver, any firearm that is converted into a muzzle loading weapon, or any muzzle loading weapon that can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof.
-
Armor piercing ammunition. Projectiles or projectile cores which may be used in a handgun and which are constructed entirely (excluding the presence of traces of other substances) from one or a combination of tungsten alloys, steel, iron, brass, bronze, beryllium copper, or depleted uranium; or full jacketed projectiles larger than .22 caliber designed and intended for use in a handgun and whose jacket has a weight of more than 25 percent of the total weight of the projectile. The term does not include shotgun shot required by Federal or State environmental or game regulations for hunting purposes, frangible projectiles designed for target shooting, projectiles which the Director finds are primarily intended to be used for sporting purposes, or any other projectiles or projectile cores which the Director finds are intended to be used for industrial purposes, including charges used in oil and gas well perforating devices.
-
ATF officer. An officer or employee of the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) authorized to perform any function relating to the administration or enforcement of this part.
-
Business premises. The property on which the manufacturing or importing of firearms or ammunition or the dealing in firearms is or will be conducted. A private dwelling, no part of which is open to the public, shall not be recognized as coming within the meaning of the term.
-
Chief, Federal Firearms Licensing Center (FFLC). The ATF official responsible for the issuance and renewal of licenses under this part.
-
Commerce. Travel, trade, traffic, commerce, transportation, or communication among the several States, or between the District of Columbia and any State, or between any foreign country or any territory or possession and any State or the District of Columbia, or between points in the same State but through any other State or the District of Columbia or a foreign country.
-
Committed to a mental institution. A formal commitment of a person to a mental institution by a court, board, commission, or other lawful authority. The term includes a commitment to a mental institution involuntarily. The term includes commitment for mental defectiveness or mental illness. It also includes commitments for other reasons, such as for drug use. The term does not include a person in a mental institution for observation or a voluntary admission to a mental institution.
-
Complete muffler or silencer device. A firearm muffler or firearm silencer that contains all component parts necessary to function, whether or not assembled or operable.
-
Complete weapon. A firearm other than a firearm muffler or firearm silencer that contains all component parts necessary to function, whether or not assembled or operable.
-
Controlled substance. A drug or other substance, or immediate precursor, as defined in section 102 of the Controlled Substances Act, 21 U.S.C. 802. The term includes, but is not limited to, marijuana, depressants, stimulants, and narcotic drugs. The term does not include distilled spirits, wine, malt beverages, or tobacco, as those terms are defined or used in Subtitle E of the Internal Revenue Code of 1986, as amended.
-
Crime punishable by imprisonment for a term exceeding 1 year. Any Federal, State or foreign offense for which the maximum penalty, whether or not imposed, is capital punishment or imprisonment in excess of 1 year. The term shall not include (a) any Federal or State offenses pertaining to antitrust violations, unfair trade practices, restraints of trade, or other similar offenses relating to the regulation of business practices or (b) any State offense classified by the laws of the State as a misdemeanor and punishable by a term of imprisonment of 2 years or less. What constitutes a conviction of such a crime shall be determined in accordance with the law of the jurisdiction in which the proceedings were held. Any conviction which has been expunged or set aside or for which a person has been pardoned or has had civil rights restored shall not be considered a conviction for the purposes of the Act or this part, unless such pardon, expunction, or restoration of civil rights expressly provides that the person may not ship, transport, possess, or receive firearms, or unless the person is prohibited by the law of the jurisdiction in which the proceedings were held from receiving or possessing any firearms.
-
Curios or relics. Firearms which are of special interest to collectors by reason of some quality other than is associated with firearms intended for sporting use or as offensive or defensive weapons. To be recognized as curios or relics, firearms must fall within one of the following categories:
-
a.(a) Firearms which were manufactured at least 50 years prior to the current date, but not including replicas thereof;
-
c.(c) Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Proof of qualification of a particular firearm under this category may be established by evidence of present value and evidence that like firearms are not available except as collector's items, or that the value of like firearms available in ordinary commercial channels is substantially less.
-
-
Customs officer. Any officer of U.S. Customs and Border Protection, any commissioned, warrant, or petty officer of the Coast Guard, or any agent or other person authorized by law to perform the duties of a customs officer.
-
Dating relationship. A relationship between individuals who have or have recently had a continuing serious relationship of a romantic or intimate nature. A casual acquaintanceship or ordinary fraternization in a business or social context does not constitute a dating relationship. Whether a relationship constitutes a dating relationship shall be determined based on consideration of
-
1. The length of the relationship;
-
2. The nature of the relationship; and
-
3. The frequency and type of interaction between the individuals involved in the relationship.
-
Dealer. Any person engaged in the business of selling firearms at wholesale or retail; any person engaged in the business of repairing firearms or of making or fitting special barrels, stocks, or trigger mechanisms to firearms; or any person who is a pawnbroker. The term shall include any person who engages in such business or occupation on a part-time basis. The term shall include such activities wherever, or through whatever medium, they are conducted, such as at a gun show or event, flea market, auction house, or gun range or club; at one's home; by mail order; over the internet (e.g., online broker or auction); through the use of other electronic means (e.g., text messaging service, social media raffle, or website); or at any other domestic or international public or private marketplace or premises.
-
Destructive device. (a) Any explosive, incendiary, or poison gas (1) bomb, (2) grenade, (3) rocket having a propellant charge of more than 4 ounces, (4) missile having an explosive or incendiary charge of more than one-quarter ounce, (5) mine, or (6) device similar to any of the devices described in the preceding paragraphs of this definition; (b) any type of weapon (other than a shotgun or a shotgun shell which the Director finds is generally recognized as particularly suitable for sporting purposes) by whatever name known which will, or which may be readily converted to, expel a projectile by the action of an explosive or other propellant, and which has any barrel with a bore of more than one-half inch in diameter; and (c) any combination of parts either designed or intended for use in converting any device into any destructive device described in paragraph (a) or (b) of this section and from which a destructive device may be readily assembled. The term shall not include any device which is neither designed nor redesigned for use as a weapon; any device, although originally designed for use as a weapon, which is redesigned for use as a signalling, pyrotechnic, line throwing, safety, or similar device; surplus ordnance sold, loaned, or given by the Secretary of the Army pursuant to the provisions of section 4684(2), 4685, or 4686 of title 10, United States Code; or any other device which the Director finds is not likely to be used as a weapon, is an antique, or is a rifle which the owner intends to use solely for sporting, recreational, or cultural purposes.
-
Director. The Director, Bureau of Alcohol, Tobacco, Firearms, and Explosives, the Department of Justice, Washington, DC.
-
Director of Industry Operations. The principal ATF official in a Field Operations division responsible for administering regulations in this part.
-
Discharged under dishonorable conditions. Separation from the U.S. Armed Forces resulting from a dishonorable discharge or dismissal adjudged by a general court-martial. The term does not include any separation from the Armed Forces resulting from any other discharge, e.g., a bad conduct discharge.
-
Division. A Bureau of Alcohol, Tobacco, Firearms, and Explosives Division.
-
1. Any felony punishable under the Controlled Substances Act (21 U.S.C. 801 et seq.), the Controlled Substances Import and Export Act (21 U.S.C. 951 et seq.), or 46 U.S.C. chapter 705; and
-
Engaged in the business 1. Manufacturer of firearms. A person who devotes time, attention, and labor to manufacturing firearms as a regular course of trade or business with the principal objective of livelihood and profit through the sale or distribution of the firearms manufactured;
-
2. Manufacturer of ammunition. A person who devotes time, attention, and labor to manufacturing ammunition as a regular course of trade or business with the principal objective of livelihood and profit through the sale or distribution of the ammunition manufactured;
-
3. Dealer in firearms other than a gunsmith or a pawnbroker. The term "engaged in the business as a dealer in firearms other than a gunsmith or a pawnbroker" shall have the same meaning as in § 478.13.
-
4. Gunsmith. A person who, as a service performed on existing firearms not for sale or distribution, devotes time, attention, and labor to repairing or customizing firearms, making or fitting special barrels, stocks, or trigger mechanisms to firearms, or placing marks of identification on privately made firearms in accordance with this part, as a regular course of trade or business with the principal objective of livelihood and profit, but such a term shall not include a person who occasionally repairs or customizes firearms (including identification), or occasionally makes or fits special barrels, stocks, or trigger mechanisms to firearms. In the case of firearms for purposes of sale or distribution, such term shall include a person who performs repairs (e.g., by replacing worn or broken parts) on complete weapons, or places marks of identification on privately made firearms, but shall not include a person who manufactures firearms (i.e., frames or receivers or complete weapons) by completion, assembly, or applying coatings, or otherwise making them suitable for use, requiring a license as a manufacturer;
-
6. Importer of ammunition. A person who devotes time, attention, and labor to importing ammunition as a regular course of trade or business with the principal objective of livelihood and profit through the sale or distribution of the ammunition imported.
-
7. Related definitions. For purposes of this definition—
-
iii. The term "something of value" includes money, credit, personal property (e.g., another firearm or ammunition), a service, a controlled substance, or any other medium of exchange or valuable consideration, legal or illegal.
-
Executed under penalties of perjury. Signed with the prescribed declaration under the penalties of perjury as provided on or with respect to the return form, or other document or, where no form of declaration is prescribed, with the declaration:
-
"I declare under the penalties of perjury that this—(insert type of document, such as, statement, application, request, certificate), including the documents submitted in support thereof, has been examined by me and, to the best of my knowledge and belief, is true, correct, and complete."
-
Federal crime of terrorism. Any offense as defined under 18 U.S.C. 2332b(g)(5).
-
Federal Firearms Act. 15 U.S.C. Chapter 18.
-
Felony. Any offense under Federal or State law punishable by imprisonment for a term exceeding one year.
-
Firearm. Any weapon, including a starter gun, which will or is designed to or may readily be converted to expel a projectile by the action of an explosive; the frame or receiver of any such weapon; any firearm muffler or firearm silencer; or any destructive device; but the term shall not include an antique firearm. In the case of a licensed collector, the term shall mean only curios and relics. The term shall include a weapon parts kit that is designed to or may readily be completed, assembled, restored, or otherwise converted to expel a projectile by the action of an explosive. The term shall not include a weapon, including a weapon parts kit, in which the frame or receiver of such weapon is destroyed as described in the definition "frame or receiver."
-
Firearm muffler or firearm silencer. Any device for silencing, muffling, or diminishing the report of a portable firearm, including any combination of parts, designed or redesigned, and intended for use in assembling or fabricating a firearm silencer or firearm muffler, and any part intended only for use in such assembly or fabrication.
-
Former licensee inventory. Firearms that were in the business inventory of a licensee at the time the license was terminated. Such firearms differ from a personal collection and other personal firearms in that they were purchased repetitively before the license was terminated as part of a licensee's business inventory with the predominant intent to earn a profit.
-
Frame or receiver. The term "frame or receiver" shall have the same meaning as in 27 CFR 478.12.
-
Friendly foreign government. Any government with whom the United States has diplomatic relations and whom the United States has not identified as a State sponsor of terrorism.
-
Fugitive from justice. Any person who has fled from any State to avoid prosecution for a felony or a misdemeanor; or any person who leaves the State to avoid giving testimony in any criminal proceeding. The term also includes any person who knows that misdemeanor or felony charges are pending against such person and who leaves the State of prosecution.
-
Handgun.
-
Hunting license or permit lawfully issued in the United States. A license or permit issued by a State for hunting which is valid and unexpired.
-
Identification document. A document containing the name, residence address, date of birth, and photograph of the holder and which was made or issued by or under the authority of the United States Government, a State, political subdivision of a State, a foreign government, political subdivision of a foreign government, an international governmental or an international quasi- governmental organization which, when completed with information concerning a particular individual, is of a type intended or commonly accepted for the purpose of identification of individuals.
-
Importation. The bringing of a firearm or ammunition into the United States; except that the bringing of a firearm or ammunition from outside the United States into a foreign-trade zone for storage pending shipment to a foreign country or subsequent importation into this country, pursuant to this part, shall not be deemed importation.
-
Importer. Any person engaged in the business of importing or bringing firearms or ammunition into the United States. The term shall include any person who engages in such business on a part-time basis.
-
Importer's or manufacturer's serial number. The serial number placed by a licensee on a firearm, including any full or abbreviated license number, any such identification on a privately made firearm, or a serial number issued by the Director. For purposes of 18 U.S.C. 922(k) and § 478.34, the term shall include any associated licensee name, or licensee city or state placed on a frame or receiver.
-
Indictment. Includes an indictment or information in any court, under which a crime punishable by imprisonment for a term exceeding 1 year (as defined in this section) may be prosecuted, or in military cases to any offense punishable by imprisonment for a term exceeding 1 year which has been referred to a general court-martial. An information is a formal accusation of a crime, differing from an indictment in that it is made by a prosecuting attorney and not a grand jury.
-
Interstate or foreign commerce. Includes commerce between any place in a State and any place outside of that State, or within any possession of the United States (not including the Canal Zone) or the District of Columbia. The term shall not include commerce between places within the same State but through any place outside of that State.
-
Large capacity ammunition feeding device. A magazine, belt, drum, feed strip, or similar device for a firearm manufactured after September 13, 1994, that has a capacity of, or that can be readily restored or converted to accept, more than 10 rounds of ammunition. The term does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition, or a fixed device for a manually operated firearm, or a fixed device for a firearm listed in 18 U.S.C. 922, appendix A.
-
Licensed dealer. A dealer licensed under the provisions of this part.
-
Licensed importer. An importer licensed under the provisions of this part.
-
Licensed manufacturer. A manufacturer licensed under the provisions of this part.
-
Machine gun. Any weapon which shoots, is designed to shoot, or can be readily restored to shoot, automatically more than one shot, without manual reloading, by a single function of the trigger. The term shall also include the frame or receiver of any such weapon, any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machine gun, and any combination of parts from which a machine gun can be assembled if such parts are in the possession or under the control of a person. For purposes of this definition, the term "automatically" as it modifies "shoots, is designed to shoot, or can be readily restored to shoot," means functioning as the result of a self-acting or self-regulating mechanism that allows the firing of multiple rounds through a single function of the trigger; and "single function of the trigger" means a single pull of the trigger and analogous motions. The term "machine gun" includes a bump-stock-type device, i.e., a device that allows a semi-automatic firearm to shoot more than one shot with a single pull of the trigger by harnessing the recoil energy of the semi-automatic firearm to which it is affixed so that the trigger resets and continues firing without additional physical manipulation of the trigger by the shooter.
-
Manufacturer. Any person engaged in the business of manufacturing firearms or ammunition. The term shall include any person who engages in such business on a part-time basis.
-
Mental institution. Includes mental health facilities, mental hospitals, sanitariums, psychiatric facilities, and other facilities that provide diagnoses by licensed professionals of mental retardation or mental illness, including a psychiatric ward in a general hospital.
-
Misdemeanor crime of domestic violence. 1.
-
i. Is a misdemeanor under Federal, State, Tribal, or local law or, in States which do not classify offenses as misdemeanors, is an offense punishable by imprisonment for a term of one year or less, and includes offenses that are punishable only by a fine. (This is true whether or not the State statute specifically defines the offense as a “misdemeanor” or as a “misdemeanor crime of domestic violence.” The term includes all such misdemeanor convictions in Indian Courts established pursuant to 25 CFR part 11.);
-
ii. Has, as an element, the use or attempted use of physical force (e.g., assault and battery), or the threatened use of a deadly weapon; and
-
iii. Was committed by a current or former spouse, parent, or guardian of the victim, by a person with whom the victim shares a child in common, by a person who is cohabiting with or has cohabited with the victim as a spouse, parent, or guardian, (e.g., the equivalent of a "common law" marriage even if such relationship is not recognized under the law), or a person similarly situated to a spouse, parent, or guardian of the victim (e.g., two persons who are residing at the same location in an intimate relationship with the intent to make that place their home would be similarly situated to a spouse).
-
2. A person shall not be considered to have been convicted of such an offense for purposes of this part unless:
-
i The person is considered to have been convicted by the jurisdiction in which the proceedings were held.
-
ii. The person was represented by counsel in the case, or knowingly and intelligently waived the right to counsel in the case; and
-
iii. In the case of a prosecution for which a person was entitled to a jury trial in the jurisdiction in which the case was tried, either
-
A. The case was tried by a jury, or
-
B. The person knowingly and intelligently waived the right to have the case tried by a jury, by guilty plea or otherwise.
-
3. A person shall not be considered to have been convicted of such an offense for purposes of this part if the conviction has been expunged or set aside, or is an offense for which the person has been pardoned or has had civil rights restored (if the law of the jurisdiction in which the proceedings were held provides for the loss of civil rights upon conviction for such an offense) unless the pardon, expunction, or restoration of civil rights expressly provides that the person may not ship, transport, possess, or receive firearms, and the person is not otherwise prohibited by the law of the jurisdiction in which the proceedings were held from receiving or possessing any firearms.
-
4.
-
i. Subject to paragraphs (4)(ii) and (iii) of this definition, a person shall not be considered to have been convicted of a misdemeanor crime of domestic violence against an individual in a dating relationship if the conviction has been expunged or set aside, or is an offense for which the person has been pardoned or has had firearm rights restored, unless the expungement, pardon, or restoration of rights expressly provides that the person may not ship, transport, possess, or receive firearms.
-
ii. In the case of a person who has not more than one conviction of a misdemeanor crime of domestic violence against an individual in a dating relationship, and is not otherwise prohibited under 18 U.S.C. chapter 44, the person shall not be disqualified from shipping, transport, possession, receipt, or purchase of a firearm under 18 U.S.C. chapter 44 if:
-
A. Five years have elapsed from the later of the judgment of conviction or the completion of the person's custodial or supervisory sentence, if any; and
-
B. The person has not subsequently been convicted of another such offense, or any misdemeanor under Federal, State, local, or Tribal law that has, as an element, the use or attempted use of physical force, or the threatened use of a deadly weapon, or any other offense that would disqualify the person under 18 U.S.C. 922(g).
-
iii. Restoration under paragraph (4)(ii) of this definition only removes the disqualification from shipping, transport, possession, receipt, or purchase of a firearm under this part. Restoration under paragraph (4)(ii) is not available for a current or former spouse, parent, or guardian of the victim; a person with whom the victim shares a child in common; a person who is cohabiting with or has cohabited with the victim as a spouse, parent, or guardian; or a person similarly situated to a spouse, parent, or guardian of the victim.
-
National Firearms Act. 26 U.S.C. Chapter 53.
-
NICS. The National Instant Criminal Background Check System established by the Attorney General pursuant to 18 U.S.C. 922(t).
-
Nonimmigrant alien. An alien in the United States in a nonimmigrant classification as defined by section 101(a)(15) of the Immigration and Nationality Act (8 U.S.C. 1101(a)(15)).
-
Nonimmigrant visa. A visa properly issued to an alien as an eligible nonimmigrant by a competent officer as provided in the Immigration and Nationality Act, 8 U.S.C. 1101 et seq.
-
Permanently inoperable. A firearm which is incapable of discharging a shot by means of an explosive and incapable of being readily restored to a firing condition. An acceptable method of rendering most firearms permanently inoperable is to fusion weld the chamber closed and fusion weld the barrel solidly to the frame. Certain unusual firearms require other methods to render the firearm permanently inoperable. Contact ATF for instructions.
-
Person. Any individual, corporation, company, association, firm, partnership, society, or joint stock company.
-
Personal collection (or personal collection of firearms, or personal firearms collection) 1. General definition. Personal firearms that a person accumulates for study, comparison, exhibition (e.g., collecting curios or relics, or collecting unique firearms to exhibit at gun club events), or for a hobby (e.g., noncommercial, recreational activities for personal enjoyment, such as hunting, skeet, target, or competition shooting, historical re-enactment, or noncommercial firearms safety instruction). The term shall not include any firearm purchased for the purpose of resale with the predominant intent to earn a profit (e.g., primarily for a commercial purpose or financial gain, as distinguished from personal firearms a person accumulates for study, comparison, exhibition, or for a hobby, but which the person may also intend to increase in value). In addition, the term shall not include firearms accumulated primarily for personal protection: Provided, that nothing in this definition shall be construed as precluding a person from lawfully acquiring firearms for self-protection or other lawful personal use.
-
2. Personal collection of licensee. In the case of a firearm imported, manufactured, or otherwise acquired by a licensed manufacturer, licensed importer, or licensed dealer, the term shall include only a firearm described in paragraph (1) of this definition that was—
-
i. Acquired or transferred without the intent to willfully evade the restrictions placed upon licensees under 18 U.S.C. chapter 44;
-
ii. Recorded by the licensee as an acquisition in the licensee's acquisition and disposition record in accordance with § 478.122(a), § 478.123(a), or § 478.125(e) (unless acquired prior to licensure and not intended for sale);
-
iii. Recorded as a disposition from the licensee's business inventory to the licensee's personal collection or otherwise as a personal firearm in accordance with § 478.122(a), § 478.123(a), or § 478.125(e) (unless acquired prior to licensure and not intended for sale);
-
iv. Maintained in such personal collection or otherwise as a personal firearm (whether on or off the business premises) for at least one year from the date the firearm was so transferred, in accordance with 18 U.S.C. 923(c) and 27 CFR 478.125a; and
-
v. Stored separately from, and not commingled with the business inventory. When stored or displayed on the business premises, the personal collection and other personal firearms shall be appropriately identified as "not for sale" (e.g., by attaching a tag).
-
Pistol. A weapon originally designed, made, and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having (a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore(s).
-
Predominantly earn a profit. The term "predominantly earn a profit" shall have the same meaning as in § 478.13.
-
Principal objective of livelihood and profit. The intent underlying the sale or disposition of firearms is predominantly one of obtaining livelihood and pecuniary gain, as opposed to other intents such as improving or liquidating a personal firearms collection: Provided, That proof of profit shall not be required as to a person who engages in the regular and repetitive purchase and disposition of firearms for criminal purposes or terrorism.
-
Privately made firearm (PMF). A firearm, including a frame or receiver, completed, assembled, or otherwise produced by a person other than a licensed manufacturer, and without a serial number placed by a licensed manufacturer at the time the firearm was produced. The term shall not include a firearm identified and registered in the National Firearms Registration and Transfer Record pursuant to chapter 53, title 26, United States Code, or any firearm manufactured or made before October 22, 1968 (unless remanufactured or remade after that date).
-
Published ordinance. A published law of any political subdivision of a State which the Director determines to be relevant to the enforcement of this part and which is contained on a list compiled by the Director, which list is incorporated by reference in the Federal Register, revised annually, and furnished to licensees under this part.
-
Readily. A process, action, or physical state that is fairly or reasonably efficient, quick, and easy, but not necessarily the most efficient, speediest, or easiest process, action, or physical state. With respect to the classification of firearms, factors relevant in making this determination include the following:
-
1. Time, i.e., how long it takes to finish the process;
-
2. Ease, i.e., how difficult it is to do so;
-
3. Expertise, i.e., what knowledge and skills are required;
-
4. Equipment, i.e., what tools are required;
-
5. Parts availability, i.e., whether additional parts are required, and how easily they can be obtained;
-
6. Expense, i.e., how much it costs;
-
7. Scope, i.e., the extent to which the subject of the process must be changed to finish it; and
-
8. Feasibility, i.e., whether the process would damage or destroy the subject of the process, or cause it to malfunction.
-
Renounced U.S. citizenship.
-
a.(a) A person has renounced his U.S. citizenship if the person, having been a citizen of the United States, has renounced citizenship either—
-
1.(1) Before a diplomatic or consular officer of the United States in a foreign state pursuant to 8 U.S.C. 1481(a)(5); or
-
2.(2) Before an officer designated by the Attorney General when the United States is in a state of war pursuant to 8 U.S.C. 1481(a)(6).
-
-
b.(b) The term shall not include any renunciation of citizenship that has been reversed as a result of administrative or judicial appeal.
-
-
Responsible person. Any individual possessing, directly or indirectly, the power to direct or cause the direction of the management and policies of a sole proprietorship, corporation, company, partnership, or association, insofar as they pertain to firearms.
-
Revolver. A projectile weapon, of the pistol type, having a breechloading chambered cylinder so arranged that the cocking of the hammer or movement of the trigger rotates it and brings the next cartridge in line with the barrel for firing.
-
Rifle.
-
a.(a) A weapon designed or redesigned, made or remade, and intended to be fired from the shoulder, and designed or redesigned and made or remade to use the energy of an explosive to fire only a single projectile through a rifled bore for each single pull of the trigger.
-
1.(1) For purposes of this definition, the term "designed or redesigned, made or remade, and intended to be fired from the shoulder" shall include a weapon that is equipped with an accessory, component, or other rearward attachment (e.g., a "stabilizing brace") that provides surface area that allows the weapon to be fired from the shoulder, provided other factors, as described in paragraph (2), indicate that the weapon is designed, made, and intended to be fired from the shoulder.
-
2.(2) When a weapon provides surface area that allows the weapon to be fired from the shoulder, the following factors shall also be considered in determining whether the weapon is designed, made, and intended to be fired from the shoulder:
-
i.(i) Whether the weapon has a weight or length consistent with the weight or length of similarly designed rifles;
-
ii.(ii) Whether the weapon has a length of pull, measured from the center of the trigger to the center of the shoulder stock or other rearward accessory, component or attachment (including an adjustable or telescoping attachment with the ability to lock into various positions along a buffer tube, receiver extension, or other attachment method), that is consistent with similarly designed rifles;
-
iii.(iii) Whether the weapon is equipped with sights or a scope with eye relief that require the weapon to be fired from the shoulder in order to be used as designed;
-
iv.(iv) Whether the surface area that allows the weapon to be fired from the shoulder is created by a buffer tube, receiver extension, or any other accessory, component, or other rearward attachment that is necessary for the cycle of operations;
-
v.(v) The manufacturer’s direct and indirect marketing and promotional materials indicating the intended use of the weapon; and
-
vi.(vi) Information demonstrating the likely use of the weapon in the general community.
-
-
-
-
Secure gun storage or safety device.
-
c.(c) A safe, gun safe, gun case, lock box, or other device that is designed to be or can be used to store a firearm and that is designed to be unlocked only by means of a key, a combination, or other similar means.
-
Semiautomatic assault weapon.
-
-
1.(1) Norinco, Mitchell, and Poly Technologies Avtomat Kalashnikovs (all models),
-
2.(2) Action Arms Israeli Military Industries UZI and Galil,
-
3.(3) Beretta Ar70 (SC-70),
-
4.(4) Colt AR-15,
-
5.(5) Fabrique National FN/FAL, FN/LAR, and FNC,
-
6.(6) SWD M-10, M-11, M-11/9, and M-12,
-
7.(7) Steyr AUG,
-
8.(8) INTRATEC TEC-9, TEC-DC9 and TEC-22, and
-
9.(9) Revolving cylinder shotguns, such as (or similar to) the Street Sweeper and Striker 12;
-
-
b.(b) A semiautomatic rifle that has an ability to accept a detachable magazine and has at least 2 of—
-
1.(1) A folding or telescoping stock,
-
2.(2) A pistol grip that protrudes conspicuously beneath the action of the weapon,
-
3.(3) A bayonet mount,
-
4.(4) A flash suppressor or threaded barrel designed to accommodate a flash suppressor, and
-
5.(5) A grenade launcher;
-
-
c.(c) A semiautomatic pistol that has an ability to accept a detachable magazine and has at least 2 of—
-
1.(1) An ammunition magazine that attaches to the pistol outside of the pistol grip,
-
2.(2) A threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer,
-
3.(3) A shroud that is attached to, or partially or completely encircles, the barrel and that permits the shooter to hold the firearm with the nontrigger hand without being burned,
-
4.(4) A manufactured weight of 50 ounces or more when the pistol is unloaded, and
-
5.(5) A semiautomatic version of an automatic firearm; and
-
-
d.(d) A semiautomatic shotgun that has at least 2 of—
-
1.(1) A folding or telescoping stock,
-
2.(2) A pistol grip that protrudes conspicuously beneath the action of the weapon,
-
3.(3) A fixed magazine capacity in excess of 5 rounds, and
-
4.(4) An ability to accept a detachable magazine.
-
-
-
Semiautomatic pistol. Any repeating pistol which utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round, and which requires a separate pull of the trigger to fire each cartridge.
-
Semiautomatic rifle. Any repeating rifle which utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round, and which requires a separate pull of the trigger to fire each cartridge.
-
Semiautomatic shotgun. Any repeating shotgun which utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round, and which requires a separate pull of the trigger to fire each cartridge.
-
Shotgun. A weapon designed or redesigned, made or remade, and intended to be fired from the shoulder, and designed or redesigned and made or remade to use the energy of an explosive to fire through a smooth bore either a number of ball shot or a single projectile for each single pull of the trigger.
-
State. A State of the United States. The term shall include the District of Columbia, the Commonwealth of Puerto Rico, and the possessions of the United States (not including the Canal Zone).
-
State of residence. The State in which an individual resides. An individual resides in a State if he or she is present in a State with the intention of making a home in that State. If an individual is on active duty as a member of the Armed Forces, the individual's State of residence is the State in which his or her permanent duty station is located, as stated in 18 U.S.C. 921(b). The following are examples that illustrate this definition:
-
-
Example 1.
-
-
-
Example 2.
-
A maintains a home in State X and a home in State Y. A resides in State X except for weekends or the summer months of the year and in State Y for the weekends or the summer months of the year. During the time that A actually resides in State X, A is a resident of State X, and during the time that A actually resides in State Y, A is a resident of State Y.
-
-
-
Example 3.
-
A, an alien, travels to the United States on a three-week vacation to State X. A does not have a state of residence in State X because A does not have the intention of making a home in State X while on vacation. This is true regardless of the length of the vacation.
-
-
-
Example 4.
-
A, an alien, travels to the United States to work for three years in State X. A rents a home in State X, moves his personal possessions into the home, and his family resides with him in the home. A intends to reside in State X during the 3-year period of his employment. A is a resident of State X.
-
-
Terrorism. For purposes of the definitions "predominantly earn a profit" and "principal objective of livelihood and profit," the term "terrorism" means activity, directed against United States persons, which—
-
1. Is committed by an individual who is not a national or permanent resident alien of the United States;
-
2. Involves violent acts or acts dangerous to human life which would be a criminal violation if committed within the jurisdiction of the United States; and
-
3. Is intended—
-
i. To intimidate or coerce a civilian population;
-
ii. To influence the policy of a government by intimidation or coercion; or
-
iii. To affect the conduct of a government by assassination or kidnapping.
-
Unlawful user of or addicted to any controlled substance. A person who uses a controlled substance and has lost the power of self-control with reference to the use of controlled substance; and any person who is a current user of a controlled substance in a manner other than as prescribed by a licensed physician. Such use is not limited to the use of drugs on a particular day, or within a matter of days or weeks before, but rather that the unlawful use has occurred recently enough to indicate that the individual is actively engaged in such conduct. A person may be an unlawful current user of a controlled substance even though the substance is not being used at the precise time the person seeks to acquire a firearm or receives or possesses a firearm. An inference of current use may be drawn from evidence of a recent use or possession of a controlled substance or a pattern of use or possession that reasonably covers the present time, e.g., a conviction for use or possession of a controlled substance within the past year; multiple arrests for such offenses within the past 5 years if the most recent arrest occurred within the past year; or persons found through a drug test to use a controlled substance unlawfully, provided that the test was administered within the past year. For a current or former member of the Armed Forces, an inference of current use may be drawn from recent disciplinary or other administrative action based on confirmed drug use, e.g., court-martial conviction, nonjudicial punishment, or an administrative discharge based on drug use or drug rehabilitation failure.
-
U.S.C. The United States Code.
§ 478.12 Definition of Frame or Receiver.
-
a.(a) Except as otherwise provided in this section, the term "frame or receiver" means the following—
-
1.(1) The term "frame" means the part of a handgun, or variants thereof, that provides housing or a structure for the primary energized component designed to hold back the hammer, striker, bolt, or similar component prior to initiation of the firing sequence ( i.e., sear or equivalent), even if pins or other attachments are required to connect such component to the housing or structure.
-
2.(2) The term "receiver" means the part of a rifle, shotgun, or projectile weapon other than a handgun, or variants thereof, that provides housing or a structure for the primary component designed to block or seal the breech prior to initiation of the firing sequence ( i.e., bolt, breechblock, or equivalent), even if pins or other attachments are required to connect such component to the housing or structure.
-
3.(3) The terms "variant" and "variants thereof" mean a weapon utilizing a similar frame or receiver design irrespective of new or different model designations or configurations, characteristics, features, components, accessories, or attachments. For example, an AK-type firearm with a short stock and a pistol grip is a pistol variant of an AK-type rifle, an AR-type firearm with a short stock and a pistol grip is a pistol variant of an AR-type rifle, and a revolving cylinder shotgun is a shotgun variant of a revolver.
-
4.(4) The following are nonexclusive examples that illustrate the above definitions:
-
i.(i) Hinged or single framed revolvers: The frame is the part of the revolver that provides a structure designed to hold the sear.
-
ii.(ii) Colt 1911, Beretta/Browning/FN Herstal/Heckler & Koch/Ruger/Sig Sauer/Smith & Wesson/Taurus hammer-fired semiautomatic pistols: The frame is the lower portion of the pistol, or grip, that provides housing for the sear.
-
iii.(iii) Glock variant striker-fired semiautomatic pistols: The frame is the lower portion of the pistol, or grip, that provides housing for the sear.
-
iv.(iv) Sig Sauer P250/P320 variant semiautomatic pistols: The frame is the internal removable chassis of the pistol that provides housing for the energized component ( i.e., sear or equivalent).
-
v.(v) Bolt action rifles: The receiver is the part of the rifle that provides a structure for the bolt.
-
vi.(vi) Break action, lever action, or pump action rifles and shotguns: The receiver is the part of the rifle or shotgun that provides housing for the bolt, breechblock, or equivalent.
-
vii.(vii) AK variant firearms: The receiver is the part of the weapon that provides housing for the bolt.
-
viii.(viii) Steyr AUG variant firearms: The receiver is the central part of the weapon that provides housing for the bolt.
-
ix.(ix) Thompson machineguns and semiautomatic variants, and L1A1, FN FAL, FN FNC, MP38, MP40, and SIG 550 firearms, and HK machineguns and semiautomatic variants: The receiver is the upper part of the weapon that provides housing for the bolt.
-
x.(x) Sten, Sterling, and Kel-Tec SUB-2000 firearms: The receiver is the central part of the weapon, or tube, that provides housing for the bolt.
-
-
-
b.(b) Firearm muffler or silencer frame or receiver. The terms "frame" and "receiver" shall mean, in the case of a firearm muffler or firearm silencer, the part of the firearm, such as an outer tube or modular piece, that provides housing or a structure for the primary internal component designed to reduce the sound of a projectile ( i.e., baffles, baffling material, expansion chamber, or equivalent). In the case of a modular firearm muffler or firearm silencer device with more than one such part, the terms shall mean the principal housing attached to the weapon that expels a projectile, even if an adapter or other attachments are required to connect the part to the weapon. The terms shall not include a removable end cap of an outer tube or modular piece.
-
c.(c) Partially complete, disassembled, or nonfunctional frame or receiver. The terms "frame" and "receiver" shall include a partially complete, disassembled, or nonfunctional frame or receiver, including a frame or receiver parts kit, that is designed to or may readily be completed, assembled, restored, or otherwise converted to function as a frame or receiver, i.e., to house or provide a structure for the primary energized component of a handgun, breech blocking or sealing component of a projectile weapon other than a handgun, or internal sound reduction component of a firearm muffler or firearm silencer, as the case may be. The terms shall not include a forging, casting, printing, extrusion, unmachined body, or similar article that has not yet reached a stage of manufacture where it is clearly identifiable as an unfinished component part of a weapon ( e.g., unformed block of metal, liquid polymer, or other raw material). When issuing a classification, the Director may consider any associated templates, jigs, molds, equipment, tools, instructions, guides, or marketing materials that are sold, distributed, or possessed with the item or kit, or otherwise made available by the seller or distributor of the item or kit to the purchaser or recipient of the item or kit. The following are nonexclusive examples that illustrate the definitions:
-
Example 1 to paragraph (c)—Frame or receiver: A frame or receiver parts kit containing a partially complete or disassembled billet or blank of a frame or receiver that is sold, distributed, or possessed with a compatible jig or template is a frame or receiver, as a person with online instructions and common hand tools may readily complete or assemble the frame or receiver parts to function as a frame or receiver.
-
Example 2 to paragraph (c)—Frame or receiver: A partially complete billet or blank of a frame or receiver with one or more template holes drilled or indexed in the correct location is a frame or receiver, as a person with common hand tools may readily complete the billet or blank to function as a frame or receiver.
-
Example 4 to paragraph (c)—Not a receiver: A billet or blank of an AR-15 variant receiver without critical interior areas having been indexed, machined, or formed that is not sold, distributed, or possessed with instructions, jigs, templates, equipment, or tools such that it may readily be completed is not a receiver.
-
Example 5 to paragraph (c)—Not a receiver: A flat blank of an AK variant receiver without laser cuts or indexing that is not sold, distributed, or possessed with instructions, jigs, templates, equipment, or tools is not a receiver, as a person cannot readily fold the flat to provide housing or a structure for the primary component designed to block or seal the breech prior to initiation of the firing sequence.
-
-
d.(d) Multi-piece frame or receiver. The term "multi-piece frame or receiver" shall mean a frame or receiver that may be disassembled into multiple modular subparts, i.e., standardized units that may be replaced or exchanged. The term shall not include the internal frame of a pistol that is a complete removable chassis that provides housing for the energized component, unless the chassis itself may be disassembled. The modular subpart(s) identified in accordance with § 478.92 with an importer's or manufacturer's serial number shall be presumed, absent an official determination by the Director or other reliable evidence to the contrary, to be part of the frame or receiver of a weapon or device.
-
e.(e) Destroyed frame or receiver. The terms "frame" and "receiver" shall not include a frame or receiver that is destroyed. For purposes of these definitions, the term "destroyed" means that the frame or receiver has been permanently altered such that it may not readily be completed, assembled, restored, or otherwise converted to function as a frame or receiver. Acceptable methods of destruction include completely melting, crushing, or shredding the frame or receiver, or other method approved by the Director.
-
f.(f)
-
1.(1) Frame or receiver classifications based on which part of the weapon was classified as such before April 26, 2022. Except as provided in paragraph (f)(2) of this section, the terms "frame" and "receiver" shall include the specific part of a complete weapon, including variants thereof, determined (classified) by the Director to be defined as a firearm frame or receiver prior to April 26, 2022. Any such part that is identified with an importer's or manufacturer's serial number shall be presumed, absent an official determination by the Director or other reliable evidence to the contrary, to be the frame or receiver of the weapon. The following is a nonexclusive list of such weapons and the specific part determined by the Director to be the firearm frame or receiver as they existed on that date:
-
i.(i) AR-15/M-16 variant firearms: The receiver is the lower part of the weapon that provides housing for the trigger mechanism and hammer ( i.e., lower receiver).
-
ii.(ii) Ruger Mark IV pistol: The frame is the upper part of the weapon that provides housing for the bolt or breechblock.
-
iii.(iii) Benelli 121 M1 Shotgun: The receiver is the lower part of the weapon that provides housing for the trigger mechanism.
-
iv.(iv) Vickers/Maxim, Browning 1919, M2, and box-type machineguns and semiautomatic variants: The receiver is the side plate of the weapon that is designed to hold the charging handle.
-
-
2.(2) Frame or receiver classifications of partially complete, disassembled, or nonfunctional frames or receivers before April 26, 2022. Prior determinations by the Director that a partially complete, disassembled, or nonfunctional frame or receiver, including a parts kit, was not, or did not include, a "firearm frame or receiver" under § 478.11, or "frame or receiver" under § 479.11 of this subchapter, as those terms were defined prior to April 26, 2022, shall not continue to be valid or authoritative after that date. Such determinations shall include those in which the Director determined that the item or parts kit had not yet reached a stage of manufacture to be, or include, a "firearm frame or receiver" under § 478.11, or "frame or receiver" under § 479.11 of this subchapter, as those terms were defined prior to [date of publication of the rule].
-
§ 478.13 Definition of "engaged in the business as a dealer in firearms other than a gunsmith or a pawnbroker."
-
a.(a) Definition. A person who devotes time, attention, and labor to dealing in firearms as a regular course of trade or business to predominantly earn a profit through the repetitive purchase and resale of firearms. The term shall not include a person who makes occasional sales, exchanges, or purchases of firearms for the enhancement of a personal collection or for a hobby, or who sells all or part of the person's personal collection of firearms. In addition, the term shall not include an auctioneer who provides only auction services on commission to assist in liquidating firearms at an estate-type auction; provided, that the auctioneer does not purchase the firearms, or take possession of the firearms for sale on consignment.
-
b.(b) Fact-specific inquiry. Whether a person is engaged in the business as a dealer under paragraph (a) of this section is a fact-specific inquiry. Selling large numbers of firearms or engaging or offering to engage in frequent transactions may be highly indicative of business activity. However, there is no minimum threshold number of firearms purchased or sold that triggers the licensing requirement. Similarly, there is no minimum number of transactions that determines whether a person is "engaged in the business" of dealing in firearms. For example, even a single firearm transaction or offer to engage in a transaction, when combined with other evidence ( e.g., where a person represents to others a willingness and ability to purchase more firearms for resale), may require a license; whereas, a single isolated firearm transaction without such evidence would not require a license. At all times, the determination of whether a person is engaged in the business of dealing in firearms is based on the totality of the circumstances.
-
c.(c) Presumptions that a person is engaged in the business as a dealer. In civil and administrative proceedings, a person shall be presumed to be engaged in the business of dealing in firearms as defined in paragraph (a) of this section, absent reliable evidence to the contrary, when it is shown that the person—
-
2.(2) Repetitively purchases for the purpose of resale, or repetitively resells or offers for resale, firearms—
-
i.(i) Through straw or sham businesses, or individual straw purchasers or sellers; or
-
ii.(ii) That cannot lawfully be purchased, received, or possessed under Federal, State, local, or Tribal law, including:
-
A.(A) Stolen firearms ( e.g., 18 U.S.C. 922(j));
-
B.(B) Firearms with the licensee's serial number removed, obliterated, or altered, or not identified as required by law ( e.g., 18 U.S.C. 922(k) or 26 U.S.C. 5861(i));
-
C.(C) Firearms imported in violation of law ( e.g., 18 U.S.C. 922(l), 22 U.S.C. 2778, or 26 U.S.C. 5844, 5861(k)); or
-
D.(D) Machineguns or other weapons defined as firearms under 26 U.S.C. 5845(b) that cannot lawfully be possessed ( e.g., 18 U.S.C. 922(o); 26 U.S.C. 5861(d));
-
-
-
3.(3) Repetitively resells or offers for resale firearms—
-
-
A.(A) New, or like new in their original packaging; or
-
B.(B) The same make and model, or variants thereof;
-
-
4.(4) As a former licensee (or responsible person acting on behalf of the former licensee), resells or offers for resale to a person (other than a licensee in accordance with § 478.57 or § 478.78) firearms that were in the business inventory of the former licensee at the time the license was terminated ( i.e., license revocation, denial of license renewal, license expiration, or surrender of license), whether or not such firearms were transferred to a responsible person of the former licensee after the license was terminated in accordance with § 478.57(b)(2) or § 478.78(b)(2); or
-
5.(5) As a former licensee (or responsible person acting on behalf of the former licensee), resells or offers for resale firearms that were transferred to the licensee's personal collection or otherwise as personal firearms in accordance with 18 U.S.C. 923(c) and 27 CFR 478.125a(a) prior to the time the license was terminated, unless:
-
-
1.(1) Definition. The intent underlying the sale or disposition of firearms is predominantly one of obtaining pecuniary gain, as opposed to other intents, such as improving or liquidating a personal firearms collection: Provided, that proof of profit, including the intent to profit, shall not be required as to a person who engages in the regular and repetitive purchase and disposition of firearms for criminal purposes or terrorism. For purposes of this section, a person may have the intent to profit even if the person does not actually obtain the intended pecuniary gain from the sale or disposition of firearms.
-
2.(2) Presumptions that a person has intent to predominantly earn a profit. In civil and administrative proceedings, a person shall be presumed to have the intent to predominantly earn a profit through the repetitive purchase and resale of firearms as defined in paragraph (d)(1) of this section, absent reliable evidence to the contrary, when it is shown that the person—
-
i.(i) Repetitively or continuously advertises, markets, or otherwise promotes a firearms business ( e.g., advertises or posts firearms for resale, including through the internet or other digital means, establishes a website to offer their firearms for resale, makes available business cards, or tags firearms with sales prices), regardless of whether the person incurs expenses or only promotes the business informally;
-
ii.(ii) Repetitively or continuously purchases, rents, or otherwise exchanges (directly or indirectly) something of value to secure permanent or temporary physical space to display firearms they offer for resale, including part or all of a business premises, a table or space at a gun show, or a display case;
-
iii.(iii) Makes and maintains records to document, track, or calculate profits and losses from firearms repetitively purchased for resale;
-
-
-
e.(e) Conduct that does not support a presumption. A person shall not be presumed to be engaged in the business of dealing in firearms when reliable evidence shows that the person is only reselling or otherwise transferring firearms—
-
1.(1) As bona fide gifts;
-
3.(3) Occasionally to a licensee or to a family member for lawful purposes;
-
4.(4) To liquidate (without restocking) all or part of the person's personal collection; or
-
5.(5) To liquidate firearms—
-
i.(i) That are inherited; or
-
ii.(ii) Pursuant to a court order; or
-
-
6.(6) To assist in liquidating firearms as an auctioneer when providing auction services on commission at an estate-type auction.
-
-
f.(f) Rebuttal evidence. Reliable evidence of the conduct set forth in paragraph (e) of this section may be used to rebut any presumption in paragraph (c) or (d)(2) of this section that a person is engaged in the business of dealing in firearms, or intends to predominantly earn a profit through the repetitive purchase and resale of firearms.
-
g.(g) Presumptions, conduct, and rebuttal evidence not exhaustive. The activities set forth in the rebuttable presumptions in paragraphs (c) and (d)(2) of this section, and the activities and rebuttal evidence set forth in paragraphs (e) and (f) of this section, are not exhaustive of the conduct or evidence that may be considered in determining whether a person is engaged in the business of dealing in firearms, or has the intent to predominantly earn a profit through the repetitive purchase and resale of firearms.
§ 478.21 Forms prescribed.
-
a.(a) The Director is authorized to prescribe all forms required by this part. All of the information called for in each form shall be furnished as indicated by the headings on the form and the instructions on or pertaining to the form. In addition, information called for in each form shall be furnished as required by this part.
-
b.(b) Requests for forms should be submitted to the ATF Distribution Center ( http://www.atf.gov ) or made by calling (202) 648-6420.
§ 478.22 Alternate methods or procedures; emergency variations from requirements.
-
a.(a) Alternate methods or procedures. The licensee, on specific approval by the Director as provided in this paragraph, may use an alternate method or procedure in lieu of a method or procedure specifically prescribed in this part. The Director may approve an alternate method or procedure, subject to stated conditions, when it is found that:
-
1.(1) Good cause is shown for the use of the alternate method or procedure;
-
2.(2) The alternate method or procedure is within the purpose of, and consistent with the effect intended by, the specifically prescribed method or procedure and that the alternate method or procedure is substantially equivalent to that specifically prescribed method or procedure; and
-
3.(3) The alternate method or procedure will not be contrary to any provision of law and will not result in an increase in cost to the Government or hinder the effective administration of this part. Where the licensee desires to employ an alternate method or procedure, a written application shall be submitted to the appropriate Director of Industry Operations, for transmittal to the Director. The application shall specifically describe the proposed alternate method or procedure and shall set forth the reasons for it. Alternate methods or procedures may not be employed until the application is approved by the Director. The licensee shall, during the period of authorization of an alternate method or procedure, comply with the terms of the approved application. Authorization of any alternate method or procedure may be withdrawn whenever, in the judgment of the Director, the effective administration of this part is hindered by the continuation of the authorization.
-
-
b.(b) Emergency variations from requirements. The Director may approve a method of operation other than as specified in this part, where it is found that an emergency exists and the proposed variation from the specified requirements are necessary and the proposed variations (1) will not hinder the effective administration of this part, and (2) will not be contrary to any provisions of law. Variations from requirements granted under this paragraph are conditioned on compliance with the procedures, conditions, and limitations set forth in the approval of the application. Failure to comply in good faith with the procedures, conditions, and limitations shall automatically terminate the authority for the variations, and the licensee shall fully comply with the prescribed requirements of regulations from which the variations were authorized. Authority for any variation may be withdrawn whenever, in the judgment of the Director, the effective administration of this part is hindered by the continuation of the variation. Where the licensee desires to employ an emergency variation, a written application shall be submitted to the appropriate Director of Industry Operations for transmittal to the Director. The application shall describe the proposed variation and set forth the reasons for it. Variations may not be employed until the application is approved.
-
c.(c) Retention of approved variations. The licensee shall retain, as part of the licensee's records, available for examination by ATF officers, any application approved by the Director under this section.
§ 478.23 Right of entry and examination.
-
a.(a) Except as provided in paragraph (b), any ATF officer, when there is reasonable cause to believe a violation of the Act has occurred and that evidence of the violation may be found on the premises of any licensed manufacturer, licensed importer, licensed dealer, or licensed collector, may, upon demonstrating such cause before a Federal magistrate and obtaining from the magistrate a warrant authorizing entry, enter during business hours (or, in the case of a licensed collector, the hours of operation) the premises, including places of storage, of any such licensee for the purpose of inspecting or examining:
-
1.(1) Any records or documents required to be kept by such licensee under this part and
-
2.(2) Any inventory of firearms or ammunition kept or stored by any licensed manufacturer, licensed importer, or licensed dealer at such premises or any firearms curios or relics or ammunition kept or stored by any licensed collector at such premises.
-
-
b.(b) Any ATF officer, without having reasonable cause to believe a violation of the Act has occurred or that evidence of the violation may be found and without demonstrating such cause before a Federal magistrate or obtaining from the magistrate a warrant authorizing entry, may enter during business hours the premises, including places of storage, of any licensed manufacturer, licensed importer, or licensed dealer for the purpose of inspecting or examining the records, documents, ammunition and firearms referred to in paragraph (a) of this section:
-
2.(2) For insuring compliance with the recordkeeping requirements of this part:
-
i.(i) Not more than once during any 12-month period, or
-
ii.(ii) At any time with respect to records relating to a firearm involved in a criminal investigation that is traced to the licensee, or
-
-
3.(3) When such inspection or examination may be required for determining the disposition of one or more particular firearms in the course of a bona fide criminal investigation.
-
c.(c) Any ATF officer, without having reasonable cause to believe a violation of the Act has occurred or that evidence of the violation may be found and without demonstrating such cause before a Federal magistrate or obtaining from the magistrate a warrant authorizing entry, may enter during hours of operation the premises, including places of storage, of any licensed collector for the purpose of inspecting or examining the records, documents, firearms, and ammunition referred to in paragraph (a) of this section (1) for ensuring compliance with the recordkeeping requirements of this part not more than once during any 12-month period or (2) when such inspection or examination may be required for determining the disposition of one or more particular firearms in the course of a bona fide criminal investigation. At the election of the licensed collector, the annual inspection permitted by this paragraph shall be performed at the ATF office responsible for conducting such inspection in closest proximity to the collectors premises.
-
d.(d) The inspections and examinations provided by this section do not authorize an ATF officer to seize any records or documents other than those records or documents constituting material evidence of a violation of law. If an ATF officer seizes such records or documents, copies shall be provided the licensee within a reasonable time.
§ 478.24 Compilation of State laws and published ordinances.
-
a.(a) The Director shall annually revise and furnish Federal firearms licensees with a compilation of State laws and published ordinances which are relevant to the enforcement of this part. The Director annually revises the compilation and publishes it as "State Laws and Published Ordinances—Firearms" which is furnished free of charge to licensees under this part. Where the compilation has previously been furnished to licensees, the Director need only furnish amendments of the relevant laws and ordinances to such licensees.
-
b.(b) "State Laws and Published Ordinances—Firearms" is incorporated by reference in this part. It is ATF Publication 5300.5, revised yearly. The current edition is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. This incorporation by reference was approved by the Director of the Federal Register.
§ 478.25 Disclosure of information.
The Director of Industry Operations may make available to any Federal, State or local law enforcement agency any information which is obtained by reason of the provisions of the Act with respect to the identification of persons prohibited from purchasing or receiving firearms or ammunition who have purchased or received firearms or ammunition, together with a description of such firearms or ammunition. Upon the request of any Federal, State or local law enforcement agency, the Director of Industry Operations may provide such agency any information contained in the records required to be maintained by the Act or this part.
§ 478.25a Responses to requests for information.
Each licensee shall respond immediately to, and in no event later than 24 hours after the receipt of, a request by an ATF officer at the National Tracing Center for information contained in the records required to be kept by this part for determining the disposition of one or more firearms in the course of a bona fide criminal investigation. The requested information shall be provided orally to the ATF officer within the 24-hour period. Verification of the identity and employment of National Tracing Center personnel requesting information may be established at the time the requested information is provided by telephoning the toll-free number 1-800-788-7132 or using the toll-free facsimile (FAX) number 1-800-788-7133.
§ 478.26 Curio and relic determination.
Any person who desires to obtain a determination whether a particular firearm is a curio or relic shall submit a written request, in duplicate, for a ruling thereon to the Director. Each such request shall be executed under the penalties of perjury and shall contain a complete and accurate description of the firearm, and such photographs, diagrams, or drawings as may be necessary to enable the Director to make a determination. The Director may require the submission of the firearm for examination and evaluation. If the submission of the firearm is impractical, the person requesting the determination shall so advise the Director and designate the place where the firearm will be available for examination and evaluation.
§ 478.27 Destructive device determination.
The Director shall determine in accordance with 18 U.S.C. 921(a)(4) whether a device is excluded from the definition of a destructive device. A person who desires to obtain a determination under that provision of law for any device which he believes is not likely to be used as a weapon shall submit a written request, in triplicate, for a ruling thereon to the Director. Each such request shall be executed under the penalties of perjury and contain a complete and accurate description of the device, the name and address of the manufacturer or importer thereof, the purpose of and use for which it is intended, and such photographs, diagrams, or drawings as may be necessary to enable the Director to make his determination. The Director may require the submission to him, of a sample of such device for examination and evaluation. If the submission of such device is impracticable, the person requesting the ruling shall so advise the Director and designate the place where the device will be available for examination and evaluation.
§ 478.28 Transportation of destructive devices and certain firearms.
-
a.(a) The Director may authorize a person to transport in interstate or foreign commerce any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle, if he finds that such transportation is reasonably necessary and is consistent with public safety and applicable State and local law. A person who desires to transport in interstate or foreign commerce any such device or weapon shall submit a written request so to do, in duplicate, to the Director. The request shall contain:
-
1.(1) A complete description and identification of the device or weapon to be transported;
-
2.(2) A statement whether such transportation involves a transfer of title;
-
3.(3) The need for such transportation;
-
4.(4) The approximate date such transportation is to take place;
-
5.(5) The present location of such device or weapon and the place to which it is to be transported;
-
6.(6) The mode of transportation to be used (including, if by common or contract carrier, the name and address of such carrier); and
-
7.(7) Evidence that the transportation or possession of such device or weapon is not inconsistent with the laws at the place of destination.
-
-
b.(b) No person shall transport any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle in interstate or foreign commerce under the provisions of this section until he has received specific authorization so to do from the Director. Authorization granted under this section does not carry or import relief from any other statutory or regulatory provision relating to firearms.
-
c.(c) This section shall not be construed as requiring licensees to obtain authorization to transport destructive devices, machine guns, short-barreled shotguns, and short-barreled rifles in interstate or foreign commerce: Provided, That in the case of a licensed importer, licensed manufacturer, or licensed dealer, such a licensee is qualified under the National Firearms Act (see also Part 479 of this chapter) and this part to engage in the business with respect to the device or weapon to be transported, and that in the case of a licensed collector, the device or weapon to be transported is a curio or relic.
§ 478.29 Out-of-State acquisition of firearms by nonlicensees.
No person, other than a licensed importer, licensed manufacturer, licensed dealer, or licensed collector, shall transport into or receive in the State where the person resides (or if a corporation or other business entity, where it maintains a place of business) any firearm purchased or otherwise obtained by such person outside that State: Provided, That the provisions of this section:
-
b.(b) Shall not apply to the transportation or receipt of a rifle or shotgun obtained from a licensed manufacturer, licensed importer, licensed dealer, or licensed collector in a State other than the transferee's State of residence in an over-the-counter transaction at the licensee's premises obtained in conformity with the provisions of § 478.96(c) and
§ 478.29a Acquisition of firearms by nonresidents.
No person, other than a licensed importer, licensed manufacturer, licensed dealer, or licensed collector, who does not reside in any State shall receive any firearms unless such receipt is for lawful sporting purposes.
§ 478.30 Out-of-State disposition of firearms by nonlicensees.
No nonlicensee shall transfer, sell, trade, give, transport, or deliver any firearm to any other nonlicensee, who the transferor knows or has reasonable cause to believe does not reside in (or if the person is a corporation or other business entity, does not maintain a place of business in) the State in which the transferor resides: Provided, That the provisions of this section:
§ 478.31 Delivery by common or contract carrier.
-
a.(a) No person shall knowingly deliver or cause to be delivered to any common or contract carrier for transportation or shipment in interstate or foreign commerce to any person other than a licensed importer, licensed manufacturer, licensed dealer, or licensed collector, any package or other container in which there is any firearm or ammunition without written notice to the carrier that such firearm or ammunition is being transported or shipped: Provided, That any passenger who owns or legally possesses a firearm or ammunition being transported aboard any common or contract carrier for movement with the passenger in interstate or foreign commerce may deliver said firearm or ammunition into the custody of the pilot, captain, conductor or operator of such common or contract carrier for the duration of that trip without violating any provision of this part.
-
b.(b) No common or contract carrier shall require or cause any label, tag, or other written notice to be placed on the outside of any package, luggage, or other container indicating that such package, luggage, or other container contains a firearm.
-
c.(c) No common or contract carrier shall transport or deliver in interstate or foreign commerce any firearm or ammunition with knowledge or reasonable cause to believe that the shipment, transportation, or receipt thereof would be in violation of any provision of this part: Provided, however, That the provisions of this paragraph shall not apply in respect to the transportation of firearms or ammunition in in-bond shipment under Customs laws and regulations.
-
d.(d) No common or contract carrier shall knowingly deliver in interstate or foreign commerce any firearm without obtaining written acknowledgement of receipt from the recipient of the package or other container in which there is a firearm: Provided, That this paragraph shall not apply with respect to the return of a firearm to a passenger who places firearms in the carrier's custody for the duration of the trip.
§ 478.32 Prohibited shipment, transportation, possession, or receipt of firearms and ammunition by certain persons.
-
a.(a) No person may ship or transport any firearm or ammunition in interstate or foreign commerce, or receive any firearm or ammunition which has been shipped or transported in interstate or foreign commerce, or possess any firearm or ammunition in or affecting commerce, who:
-
1.(1) Has been convicted in any court of a crime punishable by imprisonment for a term exceeding 1 year,
-
2.(2) Is a fugitive from justice,
-
3.(3) Is an unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substances Act, 21 U.S.C. 802),
-
4.(4) Has been adjudicated as a mental defective or has been committed to a mental institution,
-
5.(5) Being an alien—
-
i.(i) Is illegally or unlawfully in the United States; or
-
ii.(ii) Except as provided in paragraph (f) of this section, has been admitted to the United States under a nonimmigrant visa: Provided, That the provisions of this paragraph (a)(5)(ii) do not apply to any alien who has been lawfully admitted to the United States under a nonimmigrant visa, if that alien is—
-
A.(A) Admitted to the United States for lawful hunting or sporting purposes or is in possession of a hunting license or permit lawfully issued in the United States;
-
B.(B) An official representative of a foreign government who is either accredited to the United States Government or the Government's mission to an international organization having its headquarters in the United States or is en route to or from another country to which that alien is accredited. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the representative's official capacity;
-
C.(C) An official of a foreign government or a distinguished foreign visitor who has been so designated by the Department of State. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the official's or visitor's official capacity, except if the visitor is a private individual who does not have an official capacity; or
-
D.(D) A foreign law enforcement officer of a friendly foreign government entering the United States on official law enforcement business,
-
-
-
6.(6) Has been discharged from the Armed Forces under dishonorable conditions,
-
7.(7) Having been a citizen of the United States, has renounced citizenship,
-
8.(8) Is subject to a court order that—
-
ii.(ii) Restrains such person from harassing, stalking, or threatening an intimate partner of such person or child of such intimate partner or person, or engaging in other conduct that would place an intimate partner in reasonable fear of bodily injury to the partner or child; and
-
iii.(iii)
-
A.(A) Includes a finding that such person represents a credible threat to the physical safety of such intimate partner or child; or
-
B.(B) By its terms explicitly prohibits the use, attempted use, or threatened use of physical force against such intimate partner or child that would reasonably be expected to cause bodily injury, or
-
-
9.(9) Has been convicted of a misdemeanor crime of domestic violence.
-
-
b.(b) No person who is under indictment for a crime punishable by imprisonment for a term exceeding one year may ship or transport any firearm or ammunition in interstate or foreign commerce or receive any firearm or ammunition which has been shipped or transported in interstate or foreign commerce.
-
c.(c) Any individual, who to that individual's knowledge and while being employed by any person described in paragraph (a) of this section, may not in the course of such employment receive, possess, or transport any firearm or ammunition in commerce or affecting commerce or receive any firearm or ammunition which has been shipped or transported in interstate or foreign commerce.
-
d.(d) No person may sell or otherwise dispose of any firearm or ammunition to any person knowing or having reasonable cause to believe that such person, including as a juvenile:
-
1.(1) Is under indictment for, or has been convicted in any court of, a crime punishable by imprisonment for a term exceeding 1 year,
-
2.(2) Is a fugitive from justice,
-
3.(3) Is an unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substances Act, 21 U.S.C. 802),
-
4.(4) Has been adjudicated as a mental defective or has been committed to a mental institution at 16 years of age or older;
-
5.(5) Being an alien—
-
i.(i) Is illegally or unlawfully in the United States; or
-
ii.(ii) Except as provided in paragraph (f) of this section, has been admitted to the United States under a nonimmigrant visa: Provided, That the provisions of this paragraph (d)(5)(ii) do not apply to any alien who has been lawfully admitted to the United States under a nonimmigrant visa, if that alien is—
-
A.(A) Admitted to the United States for lawful hunting or sporting purposes or is in possession of a hunting license or permit lawfully issued in the United States;
-
B.(B) An official representative of a foreign government who is either accredited to the United States Government or the Government's mission to an international organization having its headquarters in the United States or en route to or from another country to which that alien is accredited. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the representative's official capacity;
-
C.(C) An official of a foreign government or a distinguished foreign visitor who has been so designated by the Department of State. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the official's or visitor's official capacity, except if the visitor is a private individual who does not have an official capacity; or
-
D.(D) A foreign law enforcement officer of a friendly foreign government entering the United States on official law enforcement business,
-
-
-
6.(6) Has been discharged from the Armed Forces under dishonorable conditions,
-
7.(7) Having been a citizen of the United States, has renounced citizenship,
-
8.(8) Is subject to a court order that restrains such person from harassing, stalking, or threatening an intimate partner of such person or child of such intimate partner or person, or engaging in other conduct that would place an intimate partner in reasonable fear of bodily injury to the partner or child: Provided, That the provisions of this paragraph shall only apply to a court order that—
-
ii.(ii)
-
A.(A) Includes a finding that such person represents a credible threat to the physical safety of such intimate partner or child; or
-
B.(B) By its terms explicitly prohibits the use, attempted use, or threatened use of physical force against such intimate partner or child that would reasonably be expected to cause bodily injury, or
-
-
9.(9) Has been convicted of a misdemeanor crime of domestic violence.
-
10.(10) Intends to sell or otherwise dispose of the firearm or ammunition in furtherance of a felony, a Federal crime of terrorism, or a drug trafficking offense; or
-
11.(11) Intends to sell or otherwise dispose of the firearm or ammunition to a person described in any of paragraphs (d)(1) through (10) of this section.
-
-
e.(e) The actual notice required by paragraphs (a)(8)(i) and (d)(8)(i) of this section is notice expressly and actually given, and brought home to the party directly, including service of process personally served on the party and service by mail. Actual notice also includes proof of facts and circumstances that raise the inference that the party received notice including, but not limited to, proof that notice was left at the party's dwelling house or usual place of abode with some person of suitable age and discretion residing therein; or proof that the party signed a return receipt for a hearing notice which had been mailed to the party. It does not include notice published in a newspaper.
-
f.(f) Pursuant to 18 U.S.C. 922(y)(3), any individual who has been admitted to the United States under a nonimmigrant visa may receive a waiver from the prohibition contained in paragraph (a)(5)(ii) of this section if the Attorney General approves a petition for the waiver.
-
g.(g) No person may knowingly purchase or conspire to purchase any firearm in or otherwise affecting interstate or foreign commerce for, or on behalf of, or at the request or demand of any other person, knowing or having reasonable cause to believe that such other person:
-
1.(1) Meets the criteria of 1 or more subsections of 18 U.S.C. 922(d);
-
2.(2) Intends to use, carry, possess, or sell or otherwise dispose of the firearm in furtherance of a felony, a Federal crime of terrorism, or a drug trafficking crime; or
-
-
h.(h) No person may:
-
1.(1) Ship, transport, transfer, cause to be transported, or otherwise dispose of, any firearm to another person in or otherwise affecting interstate or foreign commerce, knowing or having reasonable cause to believe that it would constitute a felony for the recipient to use, carry, or possess a firearm;
-
2.(2) Receive from another person any firearm in or otherwise affecting interstate or foreign commerce if the recipient knows or has reasonable cause to believe that receiving the firearm would constitute a felony; or
-
§ 478.33 Stolen firearms and ammunition.
No person shall transport or ship in interstate or foreign commerce any stolen firearm or stolen ammunition knowing or having reasonable cause to believe that the firearm or ammunition was stolen, and no person shall receive, possess, conceal, store, barter, sell, or dispose of any stolen firearm or stolen ammunition, or pledge or accept as security for a loan any stolen firearm or stolen ammunition, which is moving as, which is a part of, which constitutes, or which has been shipped or transported in, interstate or foreign commerce, either before or after it was stolen, knowing or having reasonable cause to believe that the firearm or ammunition was stolen.
§ 478.33a Theft of firearms.
No person shall steal or unlawfully take or carry away from the person or the premises of a person who is licensed to engage in the business of importing, manufacturing, or dealing in firearms, any firearm in the licensee's business inventory that has been shipped or transported in interstate or foreign commerce.
§ 478.34 Removed, obliterated, or altered serial number.
No person shall knowingly transport, ship, or receive in interstate or foreign commerce any firearm which has had the importer's or manufacturer's serial number removed, obliterated, or altered, or possess or receive any firearm which has had the importer's or manufacturer's serial number removed, obliterated, or altered and has, at any time, been shipped or transported in interstate or foreign commerce.
§ 478.35 Skeet, trap, target, and similar shooting activities.
Licensing and recordkeeping requirements, including permissible alternate records, for skeet, trap, target, and similar organized activities shall be determined by the Director of Industry Operations on a case by case basis.
§ 478.36 Transfer or possession of machine guns.
No person shall transfer or possess a machine gun except:
-
a.(a) A transfer to or by, or possession by or under the authority of, the United States, or any department or agency thereof, or a State, or a department, agency, or political subdivision thereof. (See Part 479 of this chapter); or
-
b.(b) Any lawful transfer or lawful possession of a machine gun that was lawfully possessed before May 19, 1986 (See Part 479 of this chapter).
§ 478.37 Manufacture, importation and sale of armor piercing ammunition.
No person shall manufacture or import, and no manufacturer or importer shall sell or deliver, armor piercing ammunition, except:
-
a.(a) The manufacture or importation, or the sale or delivery by any manufacturer or importer, of armor piercing ammunition for the use of the United States or any department or agency thereof or any State or any department, agency or political subdivision thereof;
-
b.(b) The manufacture, or the sale or delivery by a manufacturer or importer, of armor piercing ammunition for the purpose of exportation; or
-
c.(c) The sale or delivery by a manufacturer or importer of armor piercing ammunition for the purposes of testing or experimentation as authorized by the Director under the provisions of § 478.149.
§ 478.38 Transportation of firearms.
Notwithstanding any other provision of any law or any rule or regulation of a State or any political subdivision thereof, any person who is not otherwise prohibited by this chapter from transporting, shipping, or receiving a firearm shall be entitled to transport a firearm for any lawful purpose from any place where such person may lawfully possess and carry such firearm to any other place where such person may lawfully possess and carry such firearm if, during such transportation the firearm is unloaded, and neither the firearm nor any ammunition being transported is readily accessible or is directly accessible from the passenger compartment of such transporting vehicle: Provided, That in the case of a vehicle without a compartment separate from the driver's compartment the firearm or ammunition shall be contained in a locked container other than the glove compartment or console.
§ 478.39 Assembly of semiautomatic rifles or shotguns.
-
a.(a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes.
-
b.(b) The provisions of this section shall not apply to:
-
1.(1) The assembly of such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or
-
3.(3) The repair of any rifle or shotgun which had been imported into or assembled in the United States prior to November 30, 1990, or the replacement of any part of such firearm.
-
-
c.(c) For purposes of this section, the term imported parts are:
-
2.(2) Barrels
-
3.(3) Barrel extensions
-
4.(4) Mounting blocks (trunions)
-
5.(5) Muzzle attachments
-
6.(6) Bolts
-
7.(7) Bolt carriers
-
8.(8) Operating rods
-
9.(9) Gas pistons
-
10.(10) Trigger housings
-
11.(11) Triggers
-
12.(12) Hammers
-
13.(13) Sears
-
14.(14) Disconnectors
-
15.(15) Buttstocks
-
16.(16) Pistol grips
-
17.(17) Forearms, handguards
-
18.(18) Magazine bodies
-
19.(19) Followers
-
20.(20) Floorplates
§ 478.39a Reporting theft or loss of firearms.
-
a.(a)
-
1.(1) Each licensee shall report the theft or loss of a firearm from the licensee's inventory (including any firearm which has been transferred from the licensee's inventory to a personal collection and held as a personal firearm for at least 1 year), or from the collection of a licensed collector, within 48 hours after the theft or loss is discovered.
-
2.(2) When a firearm is stolen or lost in transit on a common or contract carrier (which for purposes of this paragraph includes the U.S. Postal Service), it is considered stolen or lost from the transferor/sender licensee's inventory for reporting purposes. Therefore, the transferor/sender of the stolen or lost firearm shall report the theft or loss of the firearm within 48 hours after the transferor/sender discovers the theft or loss.
-
-
b.(b) Each licensee shall report the theft or loss by telephoning ATF at 1-888-930-9275 (nationwide toll-free number), and by preparing and submitting to ATF a Federal Firearms Licensee Theft/Loss Report, ATF Form 3310.11, in accordance with the instructions on the form. The original of the report shall be retained by the licensee as part of the licensee's required records.
-
c.(c) When a licensee submits to ATF a Federal Firearms Licensee Theft/Loss Report, ATF Form 3310.11, for the theft or loss of a firearm registered under the National Firearms Act, this report also satisfies the notification requirement under § 479.141 of this chapter.
-
d.(d) Theft or loss of any firearm shall also be reported to the appropriate local authorities. If the location of the theft or loss is known, the local law enforcement agency at that location would be the appropriate local authority. Otherwise, the report should be made to the local law enforcement authorities at the licensee's location or business premises.
-
e.(e) Licensees shall reflect the theft or loss of a firearm as a disposition entry in the Record of Acquisition and Disposition required by subpart H of this part not later than 7 days following discovery of the theft or loss. The disposition entry shall record whether the incident is a theft or loss, the ATF-Issued Incident Number, and the Incident Number provided by the local law enforcement agency.
-
f.(f) Licensees who report the theft or loss of a firearm and later discover its whereabouts shall advise ATF at 1-888-930-9275 (nationwide toll-free number) that the firearm has been located, and shall re-enter the firearm in the Record of Acquisition and Disposition as an acquisition or disposition entry as appropriate.
§ 478.41 General.
-
a.(a) Each person intending to engage in business as an importer or manufacturer of firearms or ammunition, or a dealer in firearms shall, before commencing such business, obtain the license required by this subpart for the business to be operated. Each person who desires to obtain a license as a collector of curios or relics may obtain such a license under the provisions of this subpart.
-
b.(b) Each person intending to engage in business as a firearms or ammunition importer or manufacturer, or dealer in firearms shall file an application, with the required fee (see § 478.42), with ATF in accordance with the instructions on the form (see § 478.44), and, pursuant to § 478.47, receive the license required for such business from the Chief, Federal Firearms Licensing Center. Except as provided in § 478.50, a license must be obtained for each business and each place at which the applicant is to do business. A license as an importer or manufacturer of firearms or ammunition, or a dealer in firearms shall, subject to the provisions of the Act and other applicable provisions of law, entitle the licensee to transport, ship, and receive firearms and ammunition covered by such license in interstate or foreign commerce and to engage in the business specified by the license, at the location described on the license, and for the period stated on the license. However, it shall not be necessary for a licensed importer or a licensed manufacturer to also obtain a dealer's license in order to engage in business on the licensed premises as a dealer in the same type of firearms authorized by the license to be imported or manufactured. Payment of the license fee as an importer or manufacturer of destructive devices, ammunition for destructive devices or armor piercing ammunition or as a dealer in destructive devices includes the privilege of importing or manufacturing firearms other than destructive devices and ammunition for other than destructive devices or ammunition other than armor piercing ammunition, or dealing in firearms other than destructive devices, as the case may be, by such a licensee at the licensed premises.
-
c.(c) Each person seeking the privileges of a collector licensed under this part shall file an application, with the required fee (see § 478.42), with ATF in accordance with the instructions on the form (see § 478.44), and pursuant to § 478.47, receive from the Chief, Federal Firearms Licensing Center, the license covering the collection of curios and relics. A separate license may be obtained for each collection premises, and such license shall, subject to the provisions of the Act and other applicable provisions of law, entitle the licensee to transport, ship, receive, and acquire curios and relics in interstate or foreign commerce, and to make disposition of curios and relics in interstate or foreign commerce, to any other person licensed under the provisions of this part, for the period stated on the license.
-
d.(d) The collector license provided by this part shall apply only to transactions related to a collector's activity in acquiring, holding or disposing of curios and relics. A collector's license does not authorize the collector to engage in a business required to be licensed under the Act or this part. Therefore, if the acquisitions and dispositions of curios and relics by a collector bring the collector within the definition of a manufacturer, importer, or dealer under this part, he shall qualify as such. (See also § 478.93 of this part.)
§ 478.42 License fees.
Each applicant shall pay a fee for obtaining a firearms license or ammunition license, a separate fee being required for each business or collecting activity at each place of such business or activity, as follows:
-
a.(a) For a manufacturer:
-
1.(1) Of destructive devices, ammunition for destructive devices or armor piercing ammunition—$1,000 per year.
-
2.(2) Of firearms other than destructive devices—$50 per year.
-
3.(3) Of ammunition for firearms other than ammunition for destructive devices or armor piercing ammunition—$10 per year.
-
-
b.(b) For an importer:
-
1.(1) Of destructive devices, ammunition for destructive devices or armor piercing ammunition—$1,000 per year.
-
2.(2) Of firearms other than destructive devices or ammunition for firearms other than destructive devices or ammunition other than armor piercing ammunition—$50 per year.
-
-
c.(c) For a dealer:
-
1.(1) In destructive devices—$1,000 per year.
-
2.(2) Who is not a dealer in destructive devices—$200 for 3 years, except that the fee for renewal of a valid license shall be $90 for 3 years.
-
§ 478.43 License fee not refundable.
No refund of any part of the amount paid as a license fee shall be made where the operations of the licensee are, for any reason, discontinued during the period of an issued license. However, the license fee submitted with an application for a license shall be refunded if that application is denied or withdrawn by the applicant prior to being acted upon.
§ 478.44 Original license.
-
a.(a)
-
1.(1) Any person who intends to engage in business as a firearms or ammunition importer or manufacturer, or firearms dealer, or who has not previously been licensed under the provisions of this part to so engage in business, or who has not timely submitted an application for renewal of the previous license issued under this part, must file an application for license, ATF Form 7 (Firearms), in duplicate, with ATF in accordance with the instructions on the form. The application must:
-
i.(i) Be executed under the penalties of perjury and the penalties imposed by 18 U.S.C. 924;
-
ii.(ii) Include a photograph and fingerprints as required in the instructions on the form;
-
iii.(iii) If the applicant (including, in the case of a corporation, partnership, or association, any individual possessing, directly or indirectly, the power to direct or cause the direction of the management and policies of the corporation, partnership, or association) is an alien who has been admitted to the United States under a nonimmigrant visa, applicable documentation demonstrating that the alien falls within an exception specified in 18 U.S.C. 922(y)(2) (e.g., a hunting license or permit lawfully issued in the United States) or has obtained a waiver as specified in 18 U.S.C. 922(y)(3); and
-
iv.(iv) Include the appropriate fee in the form of money order or check made payable to the "Bureau of Alcohol, Tobacco, Firearms, and Explosives".
-
-
-
b.(b) Any person who desires to obtain a license as a collector under the Act and this part, or who has not timely submitted an application for renewal of the previous license issued under this part, shall file an application, ATF Form 7CR (Curios and Relics), with ATF in accordance with the instructions on the form. If the applicant (including, in the case of a corporation, partnership, or association, any individual possessing, directly or indirectly, the power to direct or cause the direction of the management and policies of the corporation, partnership, or association) is an alien who has been admitted to the United States under a nonimmigrant visa, the application must include applicable documentation demonstrating that the alien falls within an exception specified in 18 U.S.C. 922(y)(2) (e.g., a hunting license or permit lawfully issued in the United States) or has obtained a waiver as specified in 18 U.S.C. 922(y)(3). The application must be executed under the penalties of perjury and the penalties imposed by 18 U.S.C. 924. The application shall include the appropriate fee in the form of a money order or check made payable to the Bureau of Alcohol, Tobacco, Firearms, and Explosives. ATF Form 7CR (Curios and Relics) may be obtained by contacting the ATF Distribution Center (See § 478.21).
§ 478.45 Renewal of license.
If a licensee intends to continue the business or activity described on a license issued under this part during any portion of the ensuing year, the licensee shall, unless otherwise notified in writing by the Chief, Federal Firearms Licensing Center, execute and file with ATF prior to the expiration of the license an application for a license renewal, ATF Form 8 Part II, in accordance with the instructions on the form, and the required fee. If the applicant is an alien who has been admitted to the United States under a nonimmigrant visa, the application must include applicable documentation demonstrating that the alien falls within an exception specified in 18 U.S.C. 922(y)(2) (e.g., a hunting license or permit lawfully issued in the United States) or has obtained a waiver as specified in 18 U.S.C. 922(y)(3). The Chief, Federal Firearms Licensing Center may, in writing, require the applicant for license renewal to also file completed ATF Form 7 or ATF Form 7CR in the manner required by § 478.44. In the event the licensee does not timely file an ATF Form 8 Part II, the licensee must file an ATF Form 7 or ATF Form 7CR as required by § 478.44, and obtain the required license before continuing business or collecting activity. If an ATF Form 8 Part II is not timely received through the mails, the licensee should so notify the Chief, Federal Firearms Licensing Center.
§ 478.47 Issuance of license.
-
a.(a) Upon receipt of a properly executed application for a license on ATF Form 7, ATF Form 7CR, or ATF Form 8 Part II, the Chief, Federal Firearms Licensing Center, shall, upon finding through further inquiry or investigation, or otherwise, that the applicant is qualified, issue the appropriate license. Each license shall bear a unique license number and such number may be assigned to the licensee to whom issued for so long as the licensee maintains continuity of renewal in the same location (State).
-
b.(b) The Chief, Federal Firearms Licensing Center, shall approve a properly executed application for license on ATF Form 7, ATF Form 7CR, or ATF Form 8 Part II, if:
-
1.(1) The applicant is 21 years of age or over;
-
2.(2) The applicant (including, in the case of a corporation, partnership, or association, any individual possessing, directly or indirectly, the power to direct or cause the direction of the management and policies of the corporation, partnership, or association) is not prohibited under the provisions of the Act from shipping or transporting in interstate or foreign commerce, or possessing in or affecting commerce, any firearm or ammunition, or from receiving any firearm or ammunition which has been shipped or transported in interstate or foreign commerce;
-
3.(3) The applicant has not willfully violated any of the provisions of the Act or this part;
-
4.(4) The applicant has not willfully failed to disclose any material information required, or has not made any false statement as to any material fact, in connection with his application; and
-
5.(5) The applicant has in a State (i) premises from which he conducts business subject to license under the Act or from which he intends to conduct such business within a reasonable period of time, or (ii) in the case of a collector, premises from which he conducts his collecting subject to license under the Act or from which he intends to conduct such collecting within a reasonable period of time.
-
-
c.(c) The Chief, Federal Firearms Licensing Center, shall approve or the Director of Industry Operations shall deny an application for a license within the 60-day period beginning on the date the properly executed application was received: Provided, That when an applicant for license renewal is a person who is, pursuant to the provisions of § 478.78, § 478.143, or § 478.144, conducting business or collecting activity under a previously issued license, action regarding the application will be held in abeyance pending the completion of the proceedings against the applicant's existing license or license application, final determination of the applicant's criminal case, or final action by the Director on an application for relief submitted pursuant to § 478.144, as the case may be.
-
d.(d) When the Director of Industry Operations or the Chief, Federal Firearms Licensing Center fails to act on an application for a license within the 60-day period prescribed by paragraph (c) of this section, the applicant may file an action under section 1361 of title 28, United States Code, to compel ATF to act upon the application.
§ 478.48 Correction of error on license.
-
a.(a) Upon receipt of a license issued under the provisions of this part, each licensee shall examine same to ensure that the information contained thereon is accurate. If the license is incorrect, the licensee shall return the license to the Chief, Federal Firearms Licensing Center, with a statement showing the nature of the error. The Chief, Federal Firearms Licensing Center, shall correct the error, if the error was made in his office, and return the license. However, if the error resulted from information contained in the licensee's application for the license, the Chief, Federal Firearms Licensing Center, shall require the licensee to file an amended application setting forth the correct information and a statement explaining the error contained in the application. Upon receipt of the amended application and a satisfactory explanation of the error, the Chief, Federal Firearms Licensing Center, shall make the correction on the license and return same to the licensee.
-
b.(b) When the Chief, Federal Firearms Licensing Center, finds through any means other than notice from the licensee that an incorrect license has been issued, the Chief, Federal Firearms Licensing Center, may require the holder of the incorrect license to (1) return the license for correction, and (2) if the error resulted from information contained in the licensee's application for the license, the Chief, Federal Firearms Licensing Center, shall require the licensee to file an amended application setting forth the correct information, and a statement explaining the error contained in the application. The Chief, Federal Firearms Licensing Center, then shall make the correction on the license and return same to the licensee.
§ 478.50 Locations covered by license.
The license covers the class of business or the activity specified in the license at the address specified therein. A separate license must be obtained for each location at which a firearms or ammunition business or activity requiring a license under this part is conducted except:
-
a.(a) No license is required to cover a separate warehouse used by the licensee solely for storage of firearms or ammunition if the records required by this part are maintained at the licensed premises served by such warehouse or if such warehouse is used by the licensee for the storage of records as provided in § 478.129;
-
c.(c) A licensee may conduct business at a gun show pursuant to the provision of § 478.100; or
-
d.(d) A licensed importer, manufacturer, or dealer may engage in the business of dealing in curio or relic firearms with another licensee at any location pursuant to the provisions of § 478.100.
§ 478.51 License not transferable.
Licenses issued under this part are not transferable. In the event of the lease, sale, or other transfer of the operations authorized by the license, the successor must obtain the license required by this part prior to commencing such operations. However, for rules on right of succession, see § 478.56.
§ 478.52 Change of address.
-
a.(a) Licensees may during the term of their current license remove their business or activity to a new location at which they intend regularly to carry on such business or activity by filing an Application for an Amended Federal Firearms License, ATF Form 5300.38, in duplicate, not less than 30 days prior to such removal with the Chief, Federal Firearms Licensing Center. The ATF Form 5300.38 shall be completed in accordance with the instructions on the form. The application must be executed under the penalties of perjury and penalties imposed by 18 U.S.C. 924. The application shall be accompanied by the licensee's original license. The Chief, Federal Firearms Licensing Center Center, may, in writing, require the applicant for an amended license to also file completed ATF Form 7 or ATF Form 7CR, or portions thereof, in the manner required by § 478.44.
-
b.(b) Upon receipt of a properly executed application for an amended license, the Chief, Federal Firearms Licensing Center, shall, upon finding through further inquiry or investigation, or otherwise, that the applicant is qualified at the new location, issue the amended license, and return it to the applicant. The license shall be valid for the remainder of the term of the original license. The Chief, Federal Firearms Licensing Center, shall, if the applicant is not qualified, refer the application for amended license to the Director of Industry Operations for denial in accordance with § 478.71.
§ 478.53 Change in trade name.
A licensee continuing to conduct business at the location shown on his license is not required to obtain a new license by reason of a mere change in trade name under which he conducts his business: Provided, That such licensee furnishes his license for endorsement of such change to the Chief, Federal Firearms Licensing Center within 30 days from the date the licensee begins his business under the new trade name.
§ 478.54 Change of control.
In the case of a corporation or association holding a license under this part, if actual or legal control of the corporation or association changes, directly or indirectly, whether by reason of change in stock ownership or control (in the licensed corporation or in any other corporation), by operations of law, or in any other manner, the licensee shall, within 30 days of such change, give written notification thereof, executed under the penalties of perjury, to the Chief, Federal Firearms Licensing Center. Upon expiration of the license, the corporation or association must file a Form 7 (Firearms) as required by § 478.44.
§ 478.55 Continuing partnerships.
Where, under the laws of the particular State, the partnership is not terminated on death or insolvency of a partner, but continues until the winding up of the partnership affairs is completed, and the surviving partner has the exclusive right to the control and possession of the partnership assets for the purpose of liquidation and settlement, such surviving partner may continue to operate the business under the license of the partnership. If such surviving partner acquires the business on completion of the settlement of the partnership, he shall obtain a license in his own name from the date of acquisition, as provided in § 478.44. The rule set forth in this section shall also apply where there is more than one surviving partner.
§ 478.56 Right of succession by certain persons.
-
a.(a) Certain persons other than the licensee may secure the right to carry on the same firearms or ammunition business at the same address shown on, and for the remainder of the term of, a current license. Such persons are:
-
1.(1) The surviving spouse or child, or executor, administrator, or other legal representative of a deceased licensee; and
-
2.(2) A receiver or trustee in bankruptcy, or an assignee for benefit of creditors.
-
-
b.(b) In order to secure the right provided by this section, the person or persons continuing the business shall furnish the license for that business for endorsement of such succession to the Chief, Federal Firearms Licensing Center, within 30 days from the date on which the successor begins to carry on the business.
§ 478.57 Discontinuance of business.
-
a.(a) Where a firearm or ammunition business is either discontinued or succeeded by a new owner, the owner of the business discontinued or succeeded shall within 30 days thereof furnish to the Chief, Federal Firearms Licensing Center notification of the discontinuance or succession. (See also § 478.127.)
-
b.(b) Upon termination of a license (i.e., license revocation, denial of license renewal, license expiration, or surrender of license), the former licensee shall within 30 days, or such additional period approved by the Director for good cause, either:
-
1.(1) Liquidate the former licensee inventory by selling or otherwise disposing of the firearms to a licensed importer, licensed manufacturer, or licensed dealer for sale, auction, or pawn redemption in accordance with this part; or
-
2.(2) Transfer the former licensee inventory to a responsible person of the former licensee to whom the receipt, possession, sale, or other disposition is not prohibited by law. Any such transfer, however, does not negate the fact that the firearms were repetitively purchased, and were purchased with the predominant intent to earn a profit by repetitive purchase and resale.
-
-
c.(c) Transfers of former licensee inventory to a licensee or responsible person in accordance with paragraph (b)(1) or (2) of this section shall be appropriately recorded as dispositions, in accordance with § 478.122(b), § 478.123(b), or § 478.125(e), prior to delivering the records after discontinuing business consistent with § 478.127. Except for liquidation of former licensee inventory to a licensee within 30 days (or approved period) in accordance with paragraph (b)(1) of this section, or occasional sale of a firearm from such inventory thereafter to a licensee, a former licensee (or responsible person of such licensee) who resells any such inventory, including former licensee inventory transferred in accordance with paragraph (b)(2) of this section, is subject to the presumptions in § 478.13 (definition of "engaged in the business as a dealer in firearms other than a gunsmith or pawnbroker") that apply to a person who repetitively purchased those firearms for the purpose of resale.
§ 478.58 State or other law.
A license issued under this part confers no right or privilege to conduct business or activity contrary to State or other law. The holder of such a license is not by reason of the rights and privileges granted by that license immune from punishment for operating a firearm or ammunition business or activity in violation of the provisions of any State or other law. Similarly, compliance with the provisions of any State or other law affords no immunity under Federal law or regulations.
§ 478.59 Abandoned application.
Upon receipt of an incomplete or improperly executed application on ATF form 7 (5310.12), or ATF Form 8 (5310.11) Part II, the applicant shall be notified of the deficiency in the application. If the application is not corrected and returned within 30 days following the date of notification, the application shall be considered as having been abandoned and the license fee returned.
§ 478.60 Certain continuances of business.
A licensee who furnishes his license to the Chief, Federal Firearms Licensing Center for correction or endorsement in compliance with the provisions contained in this subpart may continue his operations while awaiting its return.
§ 478.71 Denial of an application for license.
Whenever the Director has reason to believe that an applicant is not qualified to receive a license under the provisions of § 478.47, he may issue a notice of denial, on Form 4498, to the applicant. The notice shall set forth the matters of fact and law relied upon in determining that the application should be denied, and shall afford the applicant 15 days from the date of receipt of the notice in which to request a hearing to review the denial. If no request for a hearing is filed within such time, the application shall be disapproved and a copy, so marked, shall be returned to the applicant.
§ 478.72 Hearing after application denial.
If the applicant for an original or renewal license desires a hearing to review the denial of his application, he shall file a request therefor, in duplicate, with the Director of Industry Operations within 15 days after receipt of the notice of denial. The request should include a statement of the reasons therefor. On receipt of the request, the Director of Industry Operations shall, as expeditiously as possible, make the necessary arrangements for the hearing and advise the applicant of the date, time, location, and the name of the officer before whom the hearing will be held. Such notification shall be made not less than 10 days in advance of the date set for the hearing. During the hearing the applicant will have the opportunity to submit facts and arguments for review and consideration; offers of settlement will not be entertained at the hearing but may be made before or after the hearing.On conclusion of the hearing and consideration of all relevant facts and circumstances presented by the applicant or his representative, the Director shall render his decision confirming or reversing the denial of the application. A copy of the application, marked "Disapproved," will be returned to the applicant. If the decision is that the license applied for should be issued, the applicant shall be so notified, in writing, and the license shall be issued as provided by § 478.47.
§ 478.73 Notice of revocation, suspension, or imposition of civil fine.
-
a.(a) Basis for action. Whenever the Director has reason to believe that a licensee has willfully violated any provision of the Act or this part, a notice of revocation of the license, ATF Form 4500, may be issued. In addition, a notice of revocation of the license, on ATF Form 4500, may be issued whenever the Director has reason to believe that a licensee fails to have secure gun storage or safety devices available at any place in which firearms are sold under the license to persons who are not licensees (except in any case in which a secure gun storage or safety device is temporarily unavailable because of theft, casualty loss, consumer sales, backorders from a manufacturer, or any other similar reason beyond the control of the licensee). In addition, pursuant to 18 U.S.C. 922(t)(5) and 18 U.S.C. 924(p), a notice of revocation, suspension, or imposition of a civil fine may be issued on ATF Form 4500 whenever the Director has reason to believe that a licensee has knowingly transferred a firearm to an unlicensed person and knowingly failed to comply with the requirements of 18 U.S.C. 922(t)(1) with respect to the transfer and, at the time that the transferee most recently proposed the transfer, the national instant criminal background check system was operating and information was available to the system demonstrating that transfer to the transferee or their receipt of a firearm would violate 18 U.S.C. 922(d), 922(g), or 922(n) (as applicable), or State, local, or Tribal law; or that a licensee has violated 18 U.S.C. 922(z)(1) by selling, delivering, or transferring any handgun to any person other than a licensee, unless the transferee was provided with a secure gun storage or safety device for that handgun.
-
b.(b) Issuance of notice. The notice shall set forth the matters of fact constituting the violations specified, dates, places, and the sections of law and regulations violated. The Director shall afford the licensee 15 days from the date of receipt of the notice in which to request a hearing prior to suspension or revocation of the license, or imposition of a civil fine. If the licensee does not file a timely request for a hearing, the Director shall issue a final notice of suspension or revocation and/or imposition of a civil fine on ATF Form 5300.13, as provided in § 478.74.
§ 478.74 Request for hearing after notice of suspension, revocation, or imposition of civil fine.
If a licensee desires a hearing after receipt of a notice of suspension or revocation of a license, or imposition of a civil fine, the licensee shall file a request, in duplicate, with the Director of Industry Operations within 15 days after receipt of the notice of suspension or revocation of a license, or imposition of a civil fine. On receipt of such request, the Director of Industry Operations shall, as expeditiously as possible, make necessary arrangements for the hearing and advise the licensee of the date, time, location and the name of the officer before whom the hearing will be held. Such notification shall be made no less than 10 days in advance of the date set for the hearing. On conclusion of the hearing and consideration of all the relevant presentations made by the licensee or the licensee's representative, the Director shall render a decision and shall prepare a brief summary of the findings and conclusions on which the decision is based. If the decision is that the license should be revoked, or, in actions under 18 U.S.C. 922(t)(5) or 924(p), that the license should be revoked or suspended, or that a civil fine should be imposed, a certified copy of the summary shall be furnished to the licensee with the final notice of revocation, suspension, or imposition of a civil fine on ATF Form 5300.13. If the decision is that the license should not be revoked, or in actions under 18 U.S.C. 922(t)(5) or 924(p), that the license should not be revoked or suspended, and a civil fine should not be imposed, the licensee shall be notified in writing. During the hearing the licensee will have the opportunity to submit facts and arguments for review and consideration; offers of settlement will not be entertained at the hearing but may be made before or after the hearing.
§ 478.75 Service on applicant or licensee.
All notices and other documents required to be served on an applicant or licensee under this subpart shall be served by certified mail or by personal delivery. Where service is by certified mail, a signed duplicate original copy of the formal document shall be mailed, with return receipt requested, to the applicant or licensee at the address stated in his application or license, or at his last known address. Where service is by personal delivery, a signed duplicate original copy of the formal document shall be delivered to the applicant or licensee, or, in the case of a corporation, partnership, or association, by delivering it to an officer, manager, or general agent thereof, or to its attorney of record.
§ 478.76 Representation at a hearing.
Applicants or licensees may represent themselves or be represented by an attorney, a certified public accountant, or any other person, specifically designated in a duly executed power of attorney that shall be filed in the proceeding by the applicant or licensee. The applicant or licensee shall file waivers, if applicable, under the Privacy Act of 1974 and 26 U.S.C. 6103(c) (confidentiality and disclosure of returns and return information). The Director of Industry Operations may be represented in proceedings under §§ 478.72 and 478.74 by an attorney in the Office of Chief Counsel who is authorized to execute and file motions, briefs, and other papers in the proceeding, on behalf of the Director of Industry Operations, in the attorney's own name as "Attorney for the Government."
§ 478.78 Operations by licensee after notice.
-
a.(a) In any case where denial, suspension, or revocation proceedings are pending before the Bureau of Alcohol, Tobacco, Firearms, and Explosives, or notice of denial, suspension, or revocation has been served on the licensee and he has filed timely request for a hearing, the license in the possession of the licensee shall remain in effect even though such license has expired, or the suspension or revocation date specified in the notice of revocation on Form 4500 served on the licensee has passed: Provided, That with respect to a license that has expired, the licensee has timely filed an application for the renewal of his license. If a licensee is dissatisfied with a posthearing decision revoking or suspending the license or denying the application or imposing a civil fine, as the case may be, he may, pursuant to 18 U.S.C. 923(f)(3), within 60 days after receipt of the final notice denying the application or revoking or suspending the license or imposing a civil fine, file a petition for judicial review of such action. Such petition should be filed with the U.S. district court for the district in which the applicant or licensee resides or has his principal place of business. In such case, when the Director finds that justice so requires, he may postpone the effective date of suspension or revocation of a license or authorize continued operations under the expired license, as applicable, pending judicial review.
-
b.(b) Upon final disposition of license proceedings to disapprove or terminate a license (i.e., by revocation or denial of renewal), the former licensee shall within 30 days, or such additional period approved by the Director for good cause, either:
-
1.(1) Liquidate the former licensee inventory by selling or otherwise disposing of the firearms to a licensed importer, licensed manufacturer, or licensed dealer for sale, auction, or pawn redemption in accordance with this part; or
-
2.(2) Transfer the former licensee inventory to a responsible person of the former licensee to whom the receipt, possession, sale, or other disposition is not prohibited by law. Any such transfer, however, does not negate the fact that the firearms were repetitively purchased, and were purchased with the predominant intent to earn a profit by repetitive purchase and resale.
-
-
c.(c) Transfers of former licensee inventory to a licensee or responsible person in accordance with paragraph (b)(1) or (2) of this section shall be appropriately recorded as dispositions, in accordance with § 478.122(b), § 478.123(b), or § 478.125(e), prior to delivering the records after discontinuing business consistent with § 478.127. Except for the sale of former licensee inventory to a licensee within 30 days (or approved period) in accordance with paragraph (b)(1) of this section, or occasional sale of a firearm from such inventory thereafter to a licensee, a former licensee (or responsible person of such former licensee) who resells any such inventory, including former licensee inventory transferred in accordance with paragraph (b)(2) of this section, is subject to the presumptions in § 478.13 (definition of "engaged in the business as a dealer in firearms other than a gunsmith or pawnbroker") that apply to a person who repetitively purchased those firearms for the purpose of resale.
§ 478.92 Identification of firearms and armor piercing ammunition.
-
a.(a)
-
1.(1) Firearms manufactured or imported by licensees. Except as otherwise provided in this section, licensed manufacturers and licensed importers of firearms must legibly identify each firearm they manufacture or import as follows:
-
i.(i) Serial number, name, place of business. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or otherwise placed on the frame or receiver thereof, an individual serial number, in a manner not susceptible of being readily obliterated, altered, or removed. The serial number must not duplicate any serial number placed by the licensee on any other firearm. The frame or receiver must also be marked with either: their name (or recognized abbreviation), and city and State (or recognized abbreviation) where they maintain their place of business; or their name (or recognized abbreviation) and the serial number beginning with their abbreviated Federal firearms license number, which is the first three and last five digits, as a prefix to the unique identification number, followed by a hyphen, e.g., "12345678-[unique identification number]"; and
-
ii.(ii) Model, caliber or gauge, foreign manufacturer, country of manufacture. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame or receiver, or barrel or pistol slide (if applicable) thereof, certain additional information. This information must be placed in a manner not susceptible of being readily obliterated, altered, or removed. The additional information shall include:
-
A.(A) The model, if such designation has been made;
-
B.(B) The caliber or gauge;
-
C.(C) When applicable, the name of the foreign manufacturer; and
-
D.(D) In the case of an imported firearm, the name of the country in which it was manufactured. For additional requirements relating to imported firearms, see Customs regulations at 19 CFR part 134.
-
-
iii.(iii) Multi-piece frame or receiver. In the case of a multi-piece frame or receiver, the modular subpart that is the outermost housing or structure designed to house, hold, or contain either the primary energized component of a handgun, breech blocking or sealing component of a projectile weapon other than a handgun, or internal sound reduction component of a firearm muffler or firearm silencer, as the case may be, shall be the subpart of the multi-piece frame or receiver identified in accordance with this section. If more than one subpart is similarly designed to house, hold, or contain such primary component ( e.g., left and right halves), each of those subparts must be identified with the same serial number and associated licensee information not duplicated on any other frame or receiver. The identified subpart(s) of a complete (assembled or unassembled) multi-piece frame or receiver shall not be removed and replaced ( see § 478.34, 18 U.S.C. 922(k), and 26 U.S.C. 5861(g) and (h)), unless—
-
A.(A) The subpart replacement is not a firearm under 26 U.S.C. 5845;
-
B.(B) The subpart replacement is identified by the licensed manufacturer of the original subpart with the same serial number and associated licensee information in the manner prescribed by this section; and
-
C.(C) The original subpart is destroyed under the licensed manufacturer's control or direct supervision prior to such placement.
-
-
iv.(iv) Frame or receiver, machinegun conversion part, or muffler or silencer part disposed of separately. Each part defined as a frame or receiver or modular subpart thereof described in paragraph (a)(1)(iii) of this section, machinegun, or firearm muffler or firearm silencer that is not a component part of a complete weapon or complete muffler or silencer device at the time it is sold, shipped, or otherwise disposed of by the licensee must be identified as required by this section with an individual serial number not duplicated on any other firearm and all additional identifying information, except that the model designation and caliber or gauge may be omitted if that information is unknown at the time the part is identified.
-
v.(v) Size and depth of markings. The engraving, casting, or stamping (impressing) of the serial number and additional information must be to a minimum depth of .003 inch, and the serial number and any associated license number in a print size no smaller than 1/16 inch. The size of the serial and license number is measured as the distance between the latitudinal ends of the character impression bottoms (bases). The depth of all markings required by this section is measured from the flat surface of the metal and not the peaks or ridges.
-
vi.(vi) Period of time to identify firearms. Licensed manufacturers shall identify firearms they manufacture within the period of time set forth in the following subparagraphs (A) and (B), and licensed importers must identify firearms they import within the period prescribed in § 478.112. For purposes of these subparagraphs, firearms awaiting materials, parts, or equipment repair to be completed are presumed, absent reliable evidence to the contrary, to be in the manufacturing process.
-
A.(A) Complete non-National Firearms Act weapons, and frames or receivers of such weapons. Complete weapons not defined as firearms under 26 U.S.C. 5845 shall be identified not later than the seventh day following the date the entire manufacturing process has ended for the weapon, or prior to disposition, whichever is sooner. Each part, including a replacement part, defined as a frame or receiver or modular subpart thereof described in paragraph (a)(1)(iii) of this section (other than a machinegun or firearm muffler or firearm silencer) that is not a component part of a complete weapon at the time it is sold, shipped, or otherwise disposed of shall be identified not later than the seventh day following the date the entire manufacturing process has ended for the frame or receiver or modular subpart, or prior to disposition, whichever is sooner.
-
B.(B) Complete National Firearms Act weapons and devices, and machinegun and muffler or silencer parts. Complete weapons defined as firearms under 26 U.S.C. 5845, and complete muffler or silencer devices, shall be identified not later than close of the next business day following the date the entire manufacturing process has ended for the weapon or device, or prior to disposition, whichever is sooner. Each part or modular subpart defined as a machinegun ( i.e., frame or receiver or conversion part), or firearm muffler or firearm silencer, that is not a component part of a complete weapon or complete firearm muffler or silencer device at the time it is sold, shipped, or otherwise disposed of shall be identified not later than close of the next business day following the date the entire manufacturing process has ended for the part, or prior to disposition, whichever is sooner.
-
-
-
2.(2) Privately made firearms (PMFs). Unless previously identified by another licensee in accordance with, and except as otherwise provided by, this section, licensees must legibly and conspicuously identify each privately made firearm or "PMF" received or otherwise acquired (including from a personal collection) not later than the seventh day following the date of receipt or other acquisition, or before the date of disposition (including to a personal collection), whichever is sooner. PMFs must be identified by placing, or causing to be placed under the licensee's direct supervision, an individual serial number on the frame or receiver, which must not duplicate any serial number placed by the licensee on any other firearm. The serial number must begin with the licensee's abbreviated Federal firearms license number, which is the first three and last five digits, as a prefix to a unique identification number, followed by a hyphen, e.g., "12345678-[unique identification number]". The serial number must be placed in a manner otherwise in accordance with this section, including the requirements that the serial number be at the minimum size and depth, and not susceptible of being readily obliterated, altered, or removed. An acceptable method of identifying a PMF is by placing the serial number on a metal plate that is permanently embedded into a polymer frame or receiver, or other method approved by the Director.
-
3.(3) Meaning of marking terms. For purposes of this section, the term "identify" means placing marks of identification, the terms "legible" and "legibly" mean that the identification markings (including a unique identification number) use exclusively Roman letters ( e.g., A, a, B, b, C, c) and Arabic numerals ( e.g., 1, 2, 3), or solely Arabic numerals, and may include a hyphen, and the terms "conspicuous" and "conspicuously" mean that the identification markings are capable of being easily seen with the naked eye during normal handling of the firearm, and are unobstructed by other markings when the complete weapon or device is assembled.
-
4.(4) Exceptions—
-
i.(i) Alternate means of identification. The Director may authorize other means of identification to identify firearms upon receipt of a letter application or prescribed form from the licensee showing that such other identification is reasonable and will not hinder the effective administration of this part.
-
ii.(ii) Destructive devices. In the case of a destructive device, the Director may authorize other means of identification to identify that weapon upon receipt of a letter application or prescribed form from the licensee. The application shall show that engraving, casting, or stamping (impressing) such a weapon as required by this section would be dangerous or impracticable and that the alternate means of identification proposed will not hinder the effective administration of this part.
-
iii.(iii) Adoption of identifying markings. Licensees may adopt existing markings previously placed on a firearm and are not required to mark a serial number or other identifying markings in accordance with this section, as follows:
-
A.(A) Newly manufactured firearms: Licensed manufacturers may adopt the serial number and other identifying markings previously placed on a firearm by another licensed manufacturer provided the firearm has not been sold, shipped, or otherwise disposed of to a person other than a licensee, and the serial number adopted is not duplicated on any other firearm.
-
B.(B) Remanufactured or imported firearms. Licensed manufacturers and licensed importers may adopt the serial number or other identifying markings previously placed on a firearm that otherwise meets the requirements of this section that has been sold, shipped, or otherwise disposed of to a person other than a licensee provided that, within the period and in the manner herein prescribed, the licensee legibly and conspicuously places, or causes to be placed, on the frame or receiver either: Their name (or recognized abbreviation), and city and State (or recognized abbreviation) where they maintain their place of business; or their name (or recognized abbreviation) and abbreviated Federal firearms license number, which is the first three and last five digits, individually ( i.e., not as a prefix to the serial number adopted) after the letters "FFL", in the following format: "FFL12345678". The serial number adopted must not duplicate any serial number adopted or placed on any other firearm, except that if a licensed importer receives two or more firearms with the same foreign manufacturer's serial number, the importer may adopt the serial number by adding letters or numbers to that serial number, and may include a hyphen.
-
C.(C) Manufacturers performing gunsmithing services. Licensed manufacturers may adopt the serial number or other identifying markings previously placed on a firearm by another licensee provided the manufacturer is performing services for a nonlicensee as a gunsmith (as defined in § 478.11) on existing firearms not for sale or distribution.
-
D.(D) Privately made firearms marked by nonlicensees. Unless previously identified by another licensee in accordance with this section, licensees may adopt a unique identification number previously placed on a privately made firearm by an unlicensed person, but not duplicated on any other firearm of the licensee, that otherwise meets the identification requirements of this section provided that, within the period and in the manner herein prescribed, the licensee legibly and conspicuously places, or causes to be placed, on the frame or receiver thereof a serial number beginning with their abbreviated Federal firearms license number, which is the first three and last five digits, followed by a hyphen, before the existing unique identification number, e.g., "12345678-[unique identification number]".
-
-
iv.(iv)
-
A.(A) Firearm muffler or silencer parts transferred between qualified manufacturers for further manufacture or to complete new devices. Licensed manufacturers qualified under 27 CFR part 479 may transfer a part defined as a firearm muffler or firearm silencer to another qualified manufacturer without immediately identifying or registering such part provided that it is for further manufacture ( i.e., machining, coating, etc. ) or manufacturing a complete muffler or silencer device. Once the new device with such part is completed, the manufacturer who completes the device shall identify, record, and register it in the manner and within the period specified in this part for a complete muffler or silencer device.
-
B.(B) Firearm muffler or silencer replacement parts transferred to qualified manufacturers or dealers to repair existing devices. Licensed manufacturers qualified under part 479 may transfer a replacement part defined as a firearm muffler or firearm silencer other than a frame or receiver to a qualified manufacturer or dealer without identifying or registering such part provided that it is for repairing a complete muffler or silencer device that was previously identified, recorded, and registered in accordance with this part and part 479.
-
-
v.(v) Frames or receivers designed before August 24, 2022. Licensed manufacturers and licensed importers may continue to identify the same component of a firearm (other than a PMF) defined as a frame or receiver as it existed before August 24, 2022 with the same information required to be marked by paragraphs (a)(1)(i) and (a)(1)(ii) of this section that were in effect prior to that date, and any rules necessary to ensure such identification shall remain effective for that purpose. Any frame or receiver with a new design manufactured after August 24, 2022 must be marked with the identifying information and within the period prescribed by this section. For purposes of this paragraph, the term "new design" means that the design of the existing frame or receiver has been functionally modified or altered, as distinguished from performing a cosmetic process that adds to or changes the decoration of the frame or receiver ( e.g., painting or engraving), or by adding or replacing stocks, barrels, or accessories to the frame or receiver.
-
vi.(vi) Privately made firearms acquired before August 24, 2022. Licensees shall identify in the manner prescribed by this section, or cause another person to so identify, each privately made firearm received or otherwise acquired (including from a personal collection) by the licensee before August 24, 2022within sixty (60) days from that date, or prior to the date of final disposition (including to a personal collection), whichever is sooner.
-
-
-
b.(b) Armor piercing ammunition -
-
1.(1) Marking of ammunition. Each licensed manufacturer or licensed importer of armor piercing ammunition shall identify such ammunition by means of painting, staining or dying the exterior of the projectile with an opaque black coloring. This coloring must completely cover the point of the projectile and at least 50 percent of that portion of the projectile which is visible when the projectile is loaded into a cartridge case.
-
2.(2) Labeling of packages. Each licensed manufacturer or licensed importer of armor piercing ammunition shall clearly and conspicuously label each package in which armor piercing ammunition is contained, e.g., each box, carton, case, or other container. The label shall include the words "ARMOR PIERCING" in block letters at least 1/4 inch in height. The lettering shall be located on the exterior surface of the package which contains information concerning the caliber or gauge of the ammunition. There shall also be placed on the same surface of the package in block lettering at least 1/8 inch in height the words "FOR GOVERNMENTAL ENTITIES OR EXPORTATION ONLY." The statements required by this subparagraph shall be on a contrasting background.
-
-
c.(c) Voluntary classification of firearms and armor piercing ammunition. The Director may issue a determination (classification) to a person whether an item, including a kit, is a firearm or armor piercing ammunition as defined in this part upon receipt of a written request or form prescribed by the Director. Each such voluntary request or form submitted shall be executed under the penalties of perjury with a complete and accurate description of the item or kit, the name and address of the manufacturer or importer thereof, and a sample of such item or kit for examination. A firearm sample must include all accessories and attachments relevant to such classification as each classification is limited to the firearm in the configuration submitted. Each request for classification of a partially complete, disassembled, or nonfunctional item or kit must contain any associated templates, jigs, molds, equipment, or tools that are made available by the seller or distributor of the item or kit to the purchaser or recipient of the item or kit, and any instructions, guides, or marketing materials if they will be made available by the seller or distributor with the item or kit. Upon completion of the examination, the Director may return the sample to the person who made the request unless a determination is made that return of the sample would be or place the person in violation of law. Submissions of armor piercing ammunition with a projectile or projectile core constructed entirely from one or a combination of tungsten steel alloys, steel, iron, brass, bronze, beryllium copper, or depleted uranium must include a list of known handguns in which the ammunition may be used. Except for the classification of a specific component as the frame or receiver of a particular weapon, a determination made by the Director under this paragraph shall not be deemed by any person to be applicable to or authoritative with respect to any other sample, design, model, or configuration.
§ 478.93 Authorized operations by a licensed collector.
The license issued to a collector of curios or relics under the provisions of this part shall cover only transactions by the licensed collector in curios and relics. The collector's license is of no force or effect and a licensed collector is of the same status under the Act and this part as a nonlicensee with respect to (a) any acquisition or disposition of firearms other than curios or relics, or any transportation, shipment, or receipt of firearms other than curios or relics in interstate or foreign commerce, and (b) any transaction with a nonlicensee involving any firearm other than a curio or relic. (See also § 478.50.) A collectors license is not necessary to receive or dispose of ammunition, and a licensed collector is not precluded by law from receiving or disposing of armor piercing ammunition. However, a licensed collector may not dispose of any ammunition to a person prohibited from receiving or possessing ammunition (see § 478.99(c)). Any licensed collector who disposes of armor piercing ammunition must record the disposition as required by § 478.125 (a) and (b).
§ 478.94 Sales or deliveries between licensees.
A licensed importer, licensed manufacturer, or licensed dealer selling or otherwise disposing of firearms, and a licensed collector selling or otherwise disposing of curios or relics, to another licensee shall verify the identity and licensed status of the transferee prior to making the transaction. Verification shall be established by the transferee furnishing to the transferor a certified copy of the transferee's license and by such other means as the transferor deems necessary: Provided, That it shall not be required (a) for a transferee who has furnished a certified copy of its license to a transferor to again furnish such certified copy to that transferor during the term of the transferee's current license, (b) for a licensee to furnish a certified copy of its license to another licensee if a firearm is being returned either directly or through another licensee to such licensee and (c) for licensees of multilicensed business organizations to furnish certified copies of their licenses to other licensed locations operated by such organization: Provided further, That a multilicensed business organization may furnish to a transferor, in lieu of a certified copy of each license, a list, certified to be true, correct and complete, containing the name, address, license number, and the date of license expiration of each licensed location operated by such organization, and the transferor may sell or otherwise dispose of firearms as provided by this section to any licensee appearing on such list without requiring a certified copy of a license therefrom. A transferor licensee who has the certified information required by this section may sell or dispose of firearms to a licensee for not more than 45 days following the expiration date of the transferee's license.
§ 478.95 Certified copy of license.
The license furnished to each person licensed under the provisions of this part contains a purchasing certification statement. This original license may be reproduced and the reproduction then certified by the licensee for use pursuant to § 478.94. If the licensee desires an additional copy of the license for certification (instead of making a reproduction of the original license), the licensee may submit a request, in writing, for a certified copy or copies of the license to the Chief, Federal Firearms Licensing Center. The request must set forth the name, trade name (if any) and address of the licensee, and the number of license copies desired. There is a charge of $1 for each copy. The fee paid for copies of the license must accompany the request for copies. The fee may be paid by cash, or money order or check made payable to the Bureau of Alcohol, Tobacco, Firearms, and Explosives.
§ 478.96 Out-of-State and mail order sales.
-
b.(b) A licensed importer, licensed manufacturer, or licensed dealer may sell a firearm that is not subject to the provisions of § 478.102(a) to a nonlicensee who does not appear in person at the licensee's business premises if the nonlicensee is a resident of the same State in which the licensee's business premises are located, and the nonlicensee furnishes to the licensee the firearms transaction record, Form 4473, required by § 478.124. The nonlicensee shall attach to such record a true copy of any permit or other information required pursuant to any statute of the State and published ordinance applicable to the locality in which he resides. The licensee shall prior to shipment or delivery of the firearm, forward by registered or certified mail (return receipt requested) a copy of the record, Form 4473, to the chief law enforcement officer named on such record, and delay shipment or delivery of the firearm for a period of at least 7 days following receipt by the licensee of the return receipt evidencing delivery of the copy of the record to such chief law enforcement officer, or the return of the copy of the record to him due to the refusal of such chief law enforcement officer to accept same in accordance with U.S. Postal Service regulations. The original Form 4473, and evidence of receipt or rejection of delivery of the copy of the Form 4473 sent to the chief law enforcement officer shall be retained by the licensee as a part of the records required of him to be kept under the provisions of subpart H of this part.
-
c.(c)
-
1.(1) A licensed importer, licensed manufacturer, or licensed dealer may sell or deliver a rifle or shotgun, and a licensed collector may sell or deliver a rifle or shotgun that is a curio or relic to a nonlicensed resident of a State other than the State in which the licensee's place of business is located if—
-
ii.(ii) The licensed importer, licensed manufacturer, or licensed dealer complies with the provisions of § 478.102;
-
iii.(iii) The purchaser furnishes to the licensed importer, licensed manufacturer, or licensed dealer the firearms transaction record, Form 4473, required by § 478.124; and
-
2.(2) For purposes of paragraph (c) of this section, any licensed manufacturer, licensed importer, or licensed dealer is presumed, in the absence of evidence to the contrary, to have had actual knowledge of the State laws and published ordinances of both such States.
-
§ 478.97 Loan or rental of firearms.
-
a.(a) A licensee may lend or rent a firearm to any person for temporary use off the premises of the licensee for lawful sporting purposes: Provided, That the delivery of the firearm to such person is not prohibited by § 478.99(b) or § 478.99(c), the licensee complies with the requirements of § 478.102, and the licensee records such loan or rental in the records required to be kept by him under Subpart H of this part.
-
b.(b) A club, association, or similar organization temporarily furnishing firearms (whether by loan, rental, or otherwise) to participants in a skeet, trap, target, or similar shooting activity for use at the time and place such activity is held does not, unattended by other circumstances, cause such club, association, or similar organization to be engaged in the business of a dealer in firearms or as engaging in firearms transactions. Therefore, licensing and recordkeeping requirements contained in this part pertaining to firearms transactions would not apply to this temporary furnishing of firearms for use on premises on which such an activity is conducted.
§ 478.98 Sales or deliveries of destructive devices and certain firearms.
The sale or delivery by a licensee of any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle, to any person other than another licensee who is licensed under this part to deal in such device or firearm, is prohibited unless the person to receive such device or firearm furnishes to the licensee a sworn statement setting forth
-
a.(a) The reasons why there is a reasonable necessity for such person to purchase or otherwise acquire the device or weapon; and
-
b.(b) That such person's receipt or possession of the device or weapon would be consistent with public safety. Such sworn statement shall be made on the application to transfer and register the firearm required by Part 479 of this chapter. The sale or delivery of the device or weapon shall not be made until the application for transfer is approved by the Director and returned to the licensee (transferor) as provided in Part 479 of this chapter.
§ 478.99 Certain prohibited sales or deliveries.
-
a.(a) Interstate sales or deliveries. A licensed importer, licensed manufacturer, licensed dealer, or licensed collector shall not sell or deliver any firearm to any person not licensed under this part and who the licensee knows or has reasonable cause to believe does not reside in (or if a corporation or other business entity, does not maintain a place of business in) the State in which the licensee's place of business or activity is located: Provided, That the foregoing provisions of this paragraph (1) shall not apply to the sale or delivery of a rifle or shotgun (curio or relic, in the case of a licensed collector) to a resident of a State other than the State in which the licensee's place of business or collection premises is located if the requirements of § 478.96(c) are fully met, and (2) shall not apply to the loan or rental of a firearm to any person for temporary use for lawful sporting purposes (see § 478.97).
-
b.(b) Sales or deliveries to underaged persons. A licensed importer, licensed manufacturer, licensed dealer, or licensed collector shall not sell or deliver (1) any firearm or ammunition to any individual who the importer, manufacturer, dealer, or collector knows or has reasonable cause to believe is less than 18 years of age, and, if the firearm, or ammunition, is other than a shotgun or rifle, or ammunition for a shotgun or rifle, to any individual who the importer, manufacturer, dealer, or collector knows or has reasonable cause to believe is less than 21 years of age, or (2) any firearm to any person in any State where the purchase or possession by such person of such firearm would be in violation of any State law or any published ordinance applicable at the place of sale, delivery, or other disposition, unless the importer, manufacturer, dealer, or collector knows or has reasonable cause to believe that the purchase or possession would not be in violation of such State law or such published ordinance.
-
c.(c) Sales or deliveries to prohibited categories of persons. No person may sell or otherwise dispose of any firearm or ammunition to any person knowing or having reasonable cause to believe that such person, including as a juvenile:
-
1.(1) Is, except as provided by § 478.143, under indictment for, or, except as provided by § 478.144, has been convicted in any court of a crime punishable by imprisonment for a term exceeding 1 year;
-
2.(2) Is a fugitive from justice;
-
3.(3) Is an unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substance Act, 21 U.S.C. 802);
-
4.(4) Has been adjudicated as a mental defective or has been committed to a mental institution at 16 years of age or older;
-
5.(5) Is an alien illegally or unlawfully in the United States or, except as provided in § 478.32(f), is an alien who has been admitted to the United States under a nonimmigrant visa: Provided, That the provisions of this paragraph (c)(5) do not apply to any alien who has been lawfully admitted to the United States under a nonimmigrant visa if that alien is—
-
i.(i) Admitted to the United States for lawful hunting or sporting purposes or is in possession of a hunting license or permit lawfully issued in the United States;
-
ii.(ii) An official representative of a foreign government who is either accredited to the United States Government or the Government's mission to an international organization having its headquarters in the United States or en route to or from another country to which that alien is accredited. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the representative's official capacity;
-
iii.(iii) An official of a foreign government or a distinguished foreign visitor who has been so designated by the Department of State. This exception only applies if the firearm or ammunition is shipped, transported, possessed, or received in the official's or visitor's official capacity, except if the visitor is a private individual who does not have an official capacity; or
-
iv.(iv) A foreign law enforcement officer of a friendly foreign government entering the United States on official law enforcement business;
-
-
6.(6) Has been discharged from the Armed Forces under dishonorable conditions;
-
7.(7) Who, having been a citizen of the United States, has renounced citizenship;
-
8.(8) Is subject to a court order that restrains such person from harassing, stalking, or threatening an intimate partner of such person or child of such intimate partner or person, or engaging in other conduct that would place an intimate partner in reasonable fear of bodily injury to the partner or child, except that this paragraph shall only apply to a court order that—
-
ii.(ii)
-
A.(A) Includes a finding that such person represents a credible threat to the physical safety of such intimate partner or child; or
-
B.(B) By its terms explicitly prohibits the use, attempted use, or threatened use of physical force against such intimate partner or child that would reasonably be expected to cause bodily injury, or
-
-
9.(9) Has been convicted of a misdemeanor crime of domestic violence.
-
10.(10) Intends to sell or otherwise dispose of the firearm or ammunition in furtherance of a felony, a Federal crime of terrorism, or a drug trafficking offense; or.
-
11.(11) Intends to sell or otherwise dispose of the firearm or ammunition to a person described in any of paragraphs (c)(1) through (10) of this section.
-
-
d.(d) Manufacture, importation, and sale of armor piercing ammunition by licensed importers and licensed manufacturers. A licensed importer or licensed manufacturer shall not import or manufacture armor piercing ammunition or sell or deliver such ammunition, except:
-
1.(1) For use of the United States or any department or agency thereof or any State or any department, agency, or political subdivision thereof;
-
2.(2) For the purpose of exportation; or
-
-
e.(e) Transfer of armor piercing ammunition by licensed dealers. A licensed dealer shall not willfully transfer armor piercing ammunition: Provided, That armor piercing ammunition received and maintained by the licensed dealer as business inventory prior to August 28, 1986, may be transferred to any department or agency of the United States or any State or political subdivision thereof if a record of such ammunition is maintained in the form and manner prescribed by § 478.125(c). Any licensed dealer who violates this paragraph is subject to license revocation. See subpart E of this part. For purposes of this paragraph, the Director shall furnish each licensed dealer information defining which projectiles are considered armor piercing. Such information may not be all-inclusive for purposes of the prohibition on manufacture, importation, or sale or delivery by a manufacturer or importer of such ammunition or 18 U.S.C. 929 relating to criminal misuse of such ammunition.
-
f.(f) Purchase for, or conspire to purchase for, or sell or otherwise dispose of firearms to certain prohibited persons. It is unlawful for any person to knowingly purchase, or conspire to purchase, any firearm in or otherwise affecting interstate or foreign commerce for, on behalf of, or at the request or demand of any other person, knowing or having reasonable cause to believe that such other person:
-
1.(1) Meets the criteria of one or more subsections of 18 U.S.C. 922(d);
-
2.(2) Intends to use, carry, possess, or sell or otherwise dispose of, the firearm in furtherance of a felony, a Federal crime of terrorism, or a drug trafficking crime; or
-
-
g.(g) Transfer, otherwise dispose of, or attempt or conspire to dispose of, ship, transport, or cause to be transported, firearms when use, carrying, possession, or receipt constitutes a felony. It shall be unlawful for any person to:
-
1.(1) Transfer, otherwise dispose of, ship, transport, or cause to be transported, any firearm to another person in or otherwise affecting interstate or foreign commerce, knowing or having reasonable cause to believe that it would constitute a felony for the recipient to use, carry, or possess a firearm;
-
2.(2) Receive any firearm in or otherwise affecting interstate or foreign commerce if the recipient knows or has reasonable cause to believe that receiving the firearm would constitute a felony; or
-
§ 478.100 Conduct of business away from licensed premises.
-
a.(a)
-
1.(1) A licensee may conduct business temporarily at a gun show or event as defined in paragraph (b) if the gun show or event is located in the same State specified on the license: Provided, That such business shall not be conducted from any motorized or towed vehicle. The premises of the gun show or event at which the licensee conducts business shall be considered part of the licensed premises. Accordingly, no separate fee or license is required for the gun show or event locations. However, licensees shall comply with the provisions of § 478.91 relating to posting of licenses (or a copy thereof) while conducting business at the gun show or event.
-
2.(2) A licensed importer, manufacturer, or dealer may engage in the business of dealing in curio or relic firearms with another licensee at any location.
-
-
b.(b) A gun show or an event is a function sponsored by any national, State, or local organization, devoted to the collection, competitive use, or other sporting use of firearms, or an organization or association that sponsors functions devoted to the collection, competitive use, or other sporting use of firearms in the community.
-
c.(c) Licensees conducting business at locations other than the premises specified on their license under the provisions of paragraph (a) of this section shall maintain firearms records in the form and manner prescribed by subpart H of this part. In addition, records of firearms transactions conducted at such locations shall include the location of the sale or other disposition, be entered in the acquisition and disposition records of the licensee, and retained on the premises specified on the license.
§ 478.101 Record of transactions.
Every licensee shall maintain firearms and armor piercing ammunition records in such form and manner as is prescribed by subpart H of this part.
§ 478.102 Sales or deliveries of firearms on and after November 30, 1998.
-
a.(a) Background check. Except as provided in paragraph (d) of this section, a licensed importer, licensed manufacturer, or licensed dealer (the licensee) shall not sell, deliver, or transfer a firearm to any other person who is not licensed under this part unless the licensee meets the following requirements:
-
1.(1) Before the completion of the transfer, the licensee has contacted NICS;
-
2.(2) The licensee has verified the identity of the transferee by examining the identification document presented in accordance with the provisions of § 478.124(c); and
-
3.(3) NICS has responded to the licensee with one of the following results, or has not responded to the licensee and the required investigatory period has elapsed:
-
i.(i) Notification. NICS provides the licensee with a “Proceed” notification and a unique identification number, at which time the transfer may proceed.
-
ii.(ii) Initial investigatory period. If NICS does not respond to the licensee as described in paragraph (a)(3)(i) of this section, the licensee must not proceed with the transfer for three business days (days on which State offices are open). If three business days have elapsed from the date the licensee contacted NICS, and NICS has not provided the licensee with a “Denied” notification, the licensee may proceed with the transfer unless the transferee is under 21 years old and paragraph (a)(3)(iii) of this section applies.
-
-
Example 1 to paragraph (a)(3)(ii): -
A licensee contacts NICS on Thursday and gets a “Delayed” response. The licensee does not get a further response from NICS of any kind. If State offices are not open on Saturday and Sunday, three business days would have elapsed on the following Tuesday. The licensee may transfer the firearm on the next day, Wednesday.
-
-
-
iii.(iii) Additional investigatory period in the case of a transferee who is under 21 years old (applies through September 30, 2032). In the case of a transferee under 21 years of age, if NICS notifies the licensee within three business days from the date the licensee contacted NICS that cause exists for further investigation, the licensee may not proceed with the transfer until they receive a follow-up “Proceed” response from NICS or until another seven business days have expired, exclusive of the day on which the query is made (up to ten business days in total), whichever occurs first. If ten business days have elapsed from the date the licensee contacted NICS, and NICS has not notified the licensee that transfer to, or receipt of the firearm by, the transferee is “Denied,” the transfer may proceed.
-
-
Example 2 to paragraph (a)(3)(iii): -
A licensee contacts NICS on Thursday, the 10th and gets a “Delayed” response. If State offices are not open on Saturdays and Sundays, three business days would elapse on the following Tuesday, the 15th. If the transferee is a person 21 years of age or older, the FFL may transfer the firearm at 12:01 on Wednesday, the 16th. However, if the transferee is a person less than 21 years of age, and NICS notifies the licensee by Tuesday, the 15th, that cause exists for further investigation of a possibly disqualifying juvenile record, the licensee may not transfer the firearm the next day, the 16th. If the licensee does not get a further response from NICS by the end of the tenth business day denying the transfer, the licensee may transfer the firearm the next day. Ten business days would elapse on the Thursday of the following week, the 24th. The licensee may transfer the firearm on the next day, Friday, the 25th.
-
-
-
Example for paragraph (a). -
A licensee contacts NICS on Thursday, and gets a "delayed" response. The licensee does not get a further response from NICS. If State offices are not open on Saturday and Sunday, 3 business days would have elapsed on the following Tuesday. The licensee may transfer the firearm on the next day, Wednesday.
-
-
-
-
-
b.(b) Transaction number. In any transaction for which a licensee receives a transaction number from NICS (which shall include either a NICS transaction number or, in States where the State is recognized as a point of contact for NICS checks, a State transaction number), such number shall be recorded on a firearms transaction record, Form 4473, which shall be retained in the records of the licensee in accordance with the provisions of § 478.129. This applies regardless of whether the transaction is approved or denied by NICS, and regardless of whether the firearm is actually transferred.
-
c.(c) Time limitation on NICS checks. A NICS check conducted in accordance with paragraph (a) of this section may be relied upon by the licensee only for use in a single transaction, and for a period not to exceed 30 calendar days from the date that NICS was initially contacted. If the transaction is not completed within the 30-day period, the licensee shall initiate a new NICS check prior to completion of the transfer.
-
-
Example 3 for paragraph (c).
-
A purchaser completes the Form 4473 on December 15, 1998, and a NICS check is initiated by the licensee on that date. The licensee is informed by NICS that the information available to the system does not indicate that receipt of the firearm by the transferee would be in violation of law, and a unique identification number is provided. However, the State imposes a 7-day waiting period on all firearms transactions, and the purchaser does not return to pick up the firearm until January 22, 1999. The licensee must conduct another NICS check before transferring the firearm to the purchaser.
-
-
-
Example 4 for paragraph (c).
-
A purchaser completes the Form 4473 on January 25, 1999, and arranges for the purchase of a single firearm. A NICS check is initiated by the licensee on that date. The licensee is informed by NICS that the information available to the system does not indicate that receipt of the firearm by the transferee would be in violation of law, and a unique identification number is provided. The State imposes a 7-day waiting period on all firearms transactions, and the purchaser returns to pick up the firearm on February 15, 1999. Before the licensee executes the Form 4473, and the firearm is transferred, the purchaser decides to purchase an additional firearm. The transfer of these two firearms is considered a single transaction; accordingly, the licensee may add the second firearm to the Form 4473, and transfer that firearm without conducting another NICS check.
-
-
-
Example 5 for paragraph (c).
-
A purchaser completes a Form 4473 on February 15, 1999. The licensee receives a unique identification number from NICS on that date, the Form 4473 is executed by the licensee, and the firearm is transferred. On February 20, 1999, the purchaser returns to the licensee's premises and wishes to purchase a second firearm. The purchase of the second firearm is a separate transaction; thus, a new NICS check must be initiated by the licensee.
-
-
-
-
1.(1) The transferee has presented to the licensee a valid permit or license that—
-
i.(i) Allows the transferee to possess, acquire, or carry a firearm;
-
ii.(ii) Was issued not more than 5 years earlier by the State in which the transfer is to take place; and
-
iii.(iii) The law of the State provides that such a permit or license is to be issued only after an authorized government official has verified that the information available to such official does not indicate that possession of a firearm by the transferee would be in violation of Federal, State, or local law: Provided, That on and after November 30, 1998, the information available to such official includes the NICS;
-
-
2.(2) The firearm is subject to the provisions of the National Firearms Act and has been approved for transfer under 27 CFR part 479; or
-
§ 478.103 Posting of signs and written notification to purchasers of handguns.
-
a.(a) Each licensed importer, manufacturer, dealer, or collector who delivers a handgun to a nonlicensee shall provide such nonlicensee with written notification as described in paragraph (b) of this section.
-
b.(b) The written notification (ATF I 5300.2) required by paragraph (a) of this section shall state as follows:
The standard notification described in this paragraph can be downloaded here: ATF I 5300.2
-
(1) The misuse of handguns is a leading contributor to juvenile violence and fatalities.
-
FEDERAL LAW
-
The Gun Control Act of 1968, 18 U.S.C. Chapter 44, provides in pertinent part as follows:
-
18 U.S.C. 922(x)
-
(A) a handgun; or
-
(B) ammunition that is suitable for use only in a handgun.
-
(2) It shall be unlawful for any person who is a juvenile to knowingly possess—
-
(A) a handgun; or
-
(B) ammunition that is suitable for use only in a handgun.
-
(3) This subsection does not apply to—
-
(A) a temporary transfer of a handgun or ammunition to a juvenile or to the possession or use of a handgun or ammunition by a juvenile if the handgun and ammunition are possessed and used by the juvenile—
-
(i) in the course of employment, in the course of ranching or farming related to activities at the residence of the juvenile (or on property used for ranching or farming at which the juvenile, with the permission of the property owner or lessee, is performing activities related to the operation of the farm or ranch), target practice, hunting, or a course of instruction in the safe and lawful use of a handgun;
-
(I) during transportation by the juvenile of an unloaded handgun in a locked container directly from the place of transfer to a place at which an activity described in clause (i) is to take place and transportation by the juvenile of that handgun, unloaded and in a locked container, directly from the place at which such an activity took place to the transferor; or
-
(II) with respect to ranching or farming activities as described in clause (i) a juvenile may possess and use a handgun or ammunition with the prior written approval of the juvenile's parent or legal guardian and at the direction of an adult who is not prohibited by Federal, State, or local law from possessing a firearm;
-
(iii) the juvenile has the prior written consent in the juvenile's possession at all times when a handgun is in the possession of the juvenile; and
-
(iv) in accordance with State and local law;
-
(B) a juvenile who is a member of the Armed Forces of the United States or the National Guard who possesses or is armed with a handgun in the line of duty;
-
(C) a transfer by inheritance of title (but not possession) of a handgun or ammunition to a juvenile; or
-
(D) the possession of a handgun or ammunition by a juvenile taken in defense of the juvenile or other persons against an intruder into the residence of the juvenile or a residence in which the juvenile is an invited guest.
-
(4) A handgun or ammunition, the possession of which is transferred to a juvenile in circumstances in which the transferor is not in violation of this subsection shall not be subject to permanent confiscation by the Government if its possession by the juvenile subsequently becomes unlawful because of the conduct of the juvenile, but shall be returned to the lawful owner when such handgun or ammunition is no longer required by the Government for the purposes of investigation or prosecution.
-
(5) For purposes of this subsection, the term "juvenile" means a person who is less than 18 years of age.
-
(6)(A) In a prosecution of a violation of this subsection, the court shall require the presence of a juvenile defendant's parent or legal guardian at all proceedings.
-
(B) The court may use the contempt power to enforce subparagraph (A).
-
(C) The court may excuse attendance of a parent or legal guardian of a juvenile defendant at a proceeding in a prosecution of a violation of this subsection for good cause shown.
-
18 U.S.C. 924(a)(6)
-
(6)(A)(i) A juvenile who violates section 922(x) shall be fined under this title, imprisoned not more than 1 year, or both, except that a juvenile described in clause (ii) shall be sentenced to probation on appropriate conditions and shall not be incarcerated unless the juvenile fails to comply with a condition of probation.
-
(ii) A juvenile is described in this clause if—
-
(I) the offense of which the juvenile is charged is possession of a handgun or ammunition in violation of section 922(x)(2); and
-
(II) the juvenile has not been convicted in any court of an offense (including an offense under section 922(x) or a similar State law, but not including any other offense consisting of conduct that if engaged in by an adult would not constitute an offense) or adjudicated as a juvenile delinquent for conduct that if engaged in by an adult would constitute an offense.
-
(B) A person other than a juvenile who knowingly violates section 922(x)—
-
(i) shall be fined under this title, imprisoned not more than 1 year, or both; and
-
(ii) if the person sold, delivered, or otherwise transferred a handgun or ammunition to a juvenile knowing or having reasonable cause to know that the juvenile intended to carry or otherwise possess or discharge or otherwise use the handgun or ammunition in the commission of a crime of violence, shall be fined under this title, imprisoned not more than 10 years, or both.
-
-
c.(c) This written notification shall be delivered to the nonlicensee on ATF I 5300.2, or in the alternative, the same written notification may be delivered to the nonlicensee on another type of written notification, such as a manufacturer's or importer's brochure accompanying the handgun; a manufacturer's or importer's operational manual accompanying the handgun; or a sales receipt or invoice applied to the handgun package or container delivered to a nonlicensee. Any written notification delivered to a nonlicensee other than on ATF I 5300.2 shall include the language set forth in paragraph (b) of this section in its entirety. Any written notification other than ATF I 5300.2 shall be legible, clear, and conspicuous, and the required language shall appear in type size no smaller than 10-point type.
-
d.(d) Except as provided in paragraph (f) of this section, each licensed importer, manufacturer, or dealer who delivers a handgun to a nonlicensee shall display at its licensed premises (including temporary business locations at gun shows) a sign as described in paragraph (e) of this section. The sign shall be displayed where customers can readily see it. Licensed importers, manufacturers, and dealers will be provided with such signs by ATF. Replacement signs may be requested from the ATF Distribution Center.
-
e.(e) The sign (ATF I 5300.1) required by paragraph (d) of this section shall state as follows:
The standard notification described in this paragraph can be downloaded here: ATF I 5300.1
-
(1) The misuse of handguns is a leading contributor to juvenile violence and fatalities.
-
Note:
ATF I 5300.2 provides the complete language of the statutory prohibitions and exceptions provided in 18 U.S.C. 922(x) and the penalty provisions of 18 U.S.C. 924(a)(6). The Federal firearms licensee posting this sign will provide you with a copy of this publication upon request. Requests for additional copies of ATF I 5300.2 should be submitted to the ATF Distribution Center ( http://www.atf.gov ) or made by calling (202) 648-6420.
-
-
f.(f) The sign required by paragraph (d) of this section need not be posted on the premises of any licensed importer, manufacturer, or dealer whose only dispositions of handguns to nonlicensees are to nonlicensees who do not appear at the licensed premises and the dispositions otherwise comply with the provisions of this part.
§ 478.104 Secure gun storage or safety device.
-
a.(a) Any person who applies to be a licensed firearms dealer must certify on ATF Form 7 (5310.12), Application for Federal Firearms License, that compatible secure gun storage or safety devices will be available at any place where firearms are sold under the license to nonlicensed individuals (subject to the exception that in any case in which a secure gun storage or safety device is temporarily unavailable because of theft, casualty, loss, consumer sales, backorders from a manufacturer, or any other similar reason beyond the control of the licensee, the dealer shall not be considered in violation of the requirement to make available such a device).
-
b.(b) Any person who applies to be a licensed firearms importer or a licensed manufacturer and will be engaged in business on the licensed premises as a dealer in the same type of firearms authorized by the license to be imported or manufactured must make the certification required under paragraph (a) of this section.
-
c.(c) Each licensee described in this section must have compatible secure gun storage or safety devices available at any place in which firearms are sold under the license to persons who are not licensees. However, such licensee shall not be considered to be in violation of this requirement if a secure gun storage or safety device is temporarily unavailable because of theft, casualty loss, consumer sales, backorders from a manufacturer, or any other similar reason beyond the control of the licensee.
§ 478.111 General.
-
a.(a) Section 922(a)(3) of the Act makes it unlawful, with certain exceptions not pertinent here, for any person other than a licensee to transport into or receive in the State where the person resides any firearm purchased or otherwise obtained by the person outside of that State. However, section 925(a)(4) provides a limited exception for the transportation, shipment, receipt or importation of certain firearms and ammunition by certain members of the United States Armed Forces. Section 922(1) of the Act makes it unlawful for any person knowingly to import or bring into the United States or any possession thereof any firearm or ammunition except as provided by section 925(d) of the Act, which section provides standards for importing or bringing firearms or ammunition into the United States. Section 925(d) also provides standards for importing or bringing firearm barrels into the United States. Accordingly, no firearm, firearm barrel, or ammunition may be imported or brought into the United States except as provided by this part.
-
b.(b) Where a firearm, firearm barrel, or ammunition is imported and the authorization for importation required by this subpart has not been obtained by the person importing same, such person shall:
-
1.(1) Store, at the person's expense, such firearm, firearm barrel, or ammunition at a facility designated by U.S Customs or the Director of Industry Operations to await the issuance of the required authorization or other disposition; or
-
2.(2) Abandon such firearm, firearm barrel, or ammunition to the U.S. Government; or
-
3.(3) Export such firearm, firearm barrel, or ammunition.
-
-
c.(c) Any inquiry relative to the provisions or procedures under this subpart, other than that pertaining to the payment of customs duties or the release from Customs custody of firearms, firearm barrels, or ammunition authorized by the Director to be imported, shall be directed to the Director of Industry Operations for reply.
§ 478.112 Importation by a licensed importer.
-
a.(a) No firearm, firearm barrel, or ammunition shall be imported or brought into the United States by a licensed importer (as defined in § 478.11) unless the Director has authorized the importation of the firearm, firearm barrel, or ammunition.
-
b.(b)
-
1.(1) An application for a permit, ATF Form 6—Part I, to import or bring a firearm, firearm barrel, or ammunition into the United States or a possession thereof under this section must be filed, in triplicate, with the Director. The application must be signed and dated and must contain the information requested on the form, including:
-
i.(i) The name, address, telephone number, and license number (including expiration date) of the importer;
-
ii.(ii) The country from which the firearm, firearm barrel, or ammunition is to be imported;
-
iii.(iii) The name and address of the foreign seller and foreign shipper;
-
iv.(iv) A description of the firearm, firearm barrel, or ammunition to be imported, including:
-
A.(A) The name and address of the manufacturer;
-
B.(B) The type ( e.g., rifle, shotgun, pistol, revolver and, in the case of ammunition only, ball, wadcutter, shot, etc.);
-
C.(C) The caliber, gauge, or size;
-
D.(D) The model;
-
F.(F) The overall length, if a firearm (in inches);
-
G.(G) The serial number, if known;
-
H.(H) Whether the firearm is new or used;
-
I.(I) The quantity;
-
J.(J) The unit cost of the firearm, firearm barrel, or ammunition to be imported;
-
-
v.(v) The specific purpose of importation, including final recipient information if different from the importer;
-
vi.(vi) Verification that if a firearm, it will be identified as required by this part; and
-
vii.(vii)
-
A.(A) If a firearm or ammunition imported or brought in for scientific or research purposes, a statement describing such purpose; or
-
B.(B) If a firearm or ammunition for use in connection with competition or training pursuant to Chapter 401 of Title 10, U.S.C., a statement describing such intended use; or
-
C.(C) If an unserviceable firearm (other than a machine gun) being imported as a curio or museum piece, a description of how it was rendered unserviceable and an explanation of why it is a
-
-
-