No. A federal firearms licensee (FFL) may not scan an identification document for the purpose of auto-populating information on the Form 4473.Information scanned, read, or otherwise gathered from a driver’s license or other identification document, as defined by 27 CFR 478.11, for use in the transfer of a firearm by an FFL may not be electronically populated onto a Form 4473.In addition, each transferee must personally complete a new ATF Form 4473 each time the transferee attempts to acquire a firearm. See ATF Ruling 2016-2, conditions 3, 4 and 11.[27 CFR 478.11 and 478.124(c)(1)]
No, except that frames or receivers of firearms are "firearms" as defined in the law and are subject to the same controls as complete firearms. Certain parts of silencers and machineguns are also regulated as firearms under the GCA, as well as under the National Firearms Act (NFA).[18 U.S.C. 921(a)(3), (23) and (24); 26 U.S.C. 5845; 27 CFR 478.11 and 479.11]
Each licensee shall prepare a report of multiple sales or other disposition whenever the licensee sells or otherwise disposes of, at one time or during any five consecutive business days, two or more pistols, or revolvers, or any combination of pistols and revolvers totaling two or more, to an unlicensed person:
Provided,
That a report need not be made where pistols or revolvers, or any combination thereof, are returned to the same person from whom they ..
A multiple sale occurs when a licensed Type 01 dealer, Type 02 pawnbroker, Type 07 manufacturer, or Type 08 importer located in Arizona, California, New Mexico, or Texas sells or otherwise disposes of, at one time or during any five consecutive business days, more than one semiautomatic rifle capable of accepting a detachable magazine and with a caliber greater than.22 (including .223/5.56 caliber) to an unlicensed person.Example 1. A licensee sells two qualifying rifles (as described above) in a single transaction to an unlicensed person. This is a multiple sale and must be reported not later than the close of business on the date of the transaction.Example 2. A licensee sells a qualifying rifle (as described above) on Monday and sells another qualifying rifle (as described above) on the following Friday to the same unlicensed person. This is a qualifying multiple sale and must be reported no later than the close of business on Friday. If the licensee sells another qualifying rifle (as described above) to the same unlicensed person on the following Monday, this will constitute an additional multiple sale and must also be reported not later than the close of business on Monday. In addition, the licensee would check ‘Yes’ in Item 2c and place Friday’s date in Item 2c on the ATF Form 3310.12.Example 3. A licensee maintaining business hours Monday through Saturday sells a qualifying rifle (as describe above) to an unlicensed person on Monday and sells another qualifying rifle (as described above) to the same person on the following Saturday. This does not constitute a multiple sale and need not be reported because the sales did not occur during five consecutive business days.NOTE: Some possible ways to detect qualifying multiple sales include, but are not limited to: (a) daily review of ATF Form 4473 spanning the past five days; (b) daily review of disposition records spanning the past five days; (c) maintaining a calendar of daily sales to unlicensed persons (ideally with each purchaser listed alphabetically); and (d) maintaining a record of daily sales to unlicensed persons (ideally with each purchaser listed alphabetically).
No. A multiple sale report is not required for the return of firearms to the same individual such as a pawn redemption, consignment or repair.[27 CFR 478.126a]
Federal law, 18 U.S.C. 923(g)(3)(B), provides that Chief Law Enforcement Officers (CLEOs) receiving copies of ATF Form 3310.4 from FFLs for sales to nonprohibited persons may not disclose the contents of the forms and must destroy the forms and any record of the content of the forms within 20 days of receipt.
No. Multiple sales forms (ATF Forms 3310.4) are not required for sales of frames or receivers as they are not pistols or revolvers.[18 U.S.C. 923(g)(3); 27 CFR 478.126a]
The disposition of two or more pistols or revolvers to any nonlicensee during a period of 5 consecutive business days must be reported on ATF Form 3310.4, Report of Multiple Sale or Other Disposition of Pistols and Revolvers, not later than the close of the business day on the day of disposition of the second pistol or revolver. The licensee must forward a copy of the Form 3310.4 to the ATF office specified thereon, and another copy must be forwarded to the state police or local law enforcement agency where the sale occurred. A copy of the Form 3310.4 must also be attached to the ATF Form 4473 executed upon delivery of the pistols or revolvers.A business day for purposes of reporting multiple sales of pistols or revolvers is a day that a licensee conducts business pursuant to the license, regardless of whether state offices are open. The application of the term “business day” is, therefore, distinguishable from the term “business day” as used in the National Instant Criminal Background Check System (NICS) context.Example: A licensee conducts business only on Saturdays and Sundays, days on which state offices are not open. The licensee sells a pistol to an unlicensed person on a Saturday. If that same unlicensed person acquires another handgun the next day (Sunday), the following Saturday or Sunday, or the Saturday after that, the reporting requirement would be triggered, the subsequent acquisition of a pistol or revolver would have to be reported on a Form 3310.4 by the close of the day upon which the second or subsequent pistol or revolver was sold.[18 U.S.C. 923(g)(3); 27 CFR 478.126a]
ATF Form 3310.4 must be completed in triplicate (3 copies). The original is sent to ATF’s National Tracing Center by fax at 1–877–283–0288, by email at MultipleHandgunSalesForms@atf.gov, or by mail to:U.S. Department of JusticeBureau of Alcohol, Tobacco, Firearms and ExplosivesNational Tracing CenterP.O. Box 0279Kearneysville, WV 25430–0279A copy is to be sent to the designated state police or the local law enforcement agency in the jurisdiction where the sale took place. The remaining copy is to be attached to the corresponding ATF Form 4473 and retained in the licensee’s records for a period of not less than 5 years.[27 CFR 478.126a and 478.129]
Firearm.
(a) A shotgun having a barrel or barrels of less than 18 inches in length; (b) a weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; (c) a rifle having a barrel or barrels of less than 16 inches in length; (d) a weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; ..
Assuming that the firearm was originally a pistol, the resulting firearm, with an attached shoulder stock, is not an NFA firearm if it has a barrel of 16 inches or more in length.Pursuant to ATF Ruling 2011-4, such rifle may later be unassembled and again configured as a pistol. Such configuration would not be considered a “weapon made from a rifle” as defined by 26 U.S.C. § 5845(a)(4).[26 U.S.C. § 5845, 27 CFR § 479.11]
The following weapons are regulated under the National Firearms Act (NFA):A shotgun having a barrel or barrels of less than 18 inches in length;A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length;A rifle having a barrel or barrels of less than 16 inches in length;A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length;Any other weapon, as defined in subsection (e);A machinegun;Any silencer (as defined in section 921 of title 18, United States Code); andA destructive device.[26 U.S.C. 5845; 27 CFR 479.11]
The tax is $200 for the transfer of any firearm except a firearm classified as an “any other weapon” which is $5.An unserviceable firearm may be transferred as a curio or ornament without payment of the transfer tax.[26 U.S.C. 5811, 5852(e) and 5845(h); 27 CFR 479.11, 479.82 and 479.91]
The terms “firearm silencer” and “firearm muffler” mean any device for silencing, muffling, or diminishing the report of a portable firearm, including any combination of parts, designed or redesigned, and intended for use in assembling or fabricating a firearm silencer or firearm muffler, and any part intended only for use in such assembly or fabrication.Numerous paintball and airgun silencers tested by ATF’s Firearms Technology Branch have been determined to be firearm silencers by nature of their design and function. Because silencers are NFA weapons, an individual wishing to manufacture or transfer such a silencer must receive prior approval from ATF and pay the required tax.[26 U.S.C. 5845; 27 CFR 479.11]
Yes, unless the barrel of the pistol is at least 16 inches in length (and the overall length of the firearm with stock attached is at least 26 inches). However, certain stocked handguns, such as original semiautomatic Mauser “Broomhandles” and Lugers, have been removed from the purview of the NFA as collectors’ items.[26 U.S.C. 5845, 27 CFR 479.11]
If the individual purchasing the binary explosives is engaged in the business of manufacturing explosives, i.e., mixes and uses them in the operation of a commercial business (for example, operating a quarry, or providing the service of removing stumps or boulders from a farm field), then a manufacturer’s license is required.An individual farmer who merely wishes to mix the binary explosives to remove obstacles from his field and provides no other outside service would not need a manufacturer’s license.Please note, however: A Federal explosives license or permit would be required to obtain any explosive device, such as detonators, used to initiate the mixed binary explosives. In addition, transportation of any explosive material, including mixed binary explosives, without a Federal license or permit is prohibited. [27 CFR 555.11: Definition of "manufacturer"; 27 CFR 555.26, 555.41(b)]
A manufacturer’s license is required by persons engaged in the business of manufacturing explosive materials for sale, distribution, or for their own business use. For example, persons engaged in the business of providing a blasting service using explosives of their own manufacture would be required to have a manufacturer’s license. Persons who manufacture explosives for their personal, non-business use are not required to have a manufacturer’s license. However, no person may ship, transport, cause to be transported, or receive explosive materials unless such person holds a license or permit. [27 CFR 555.11: definition of “manufacturer”, 555.41(b)] A separate manufacturer’s license is not required by a licensed manufacturer for the purpose of on-site manufacture, for example, mixing binary explosives or making blasting agents at a quarry or other job site. It is not necessary for a licensed manufacturer to also obtain a dealer’s license or permit to engage in business on his or her licensed premises as a dealer in explosive materials [27 CFR 555.11: definition of "manufacturer", 555.41(b)(2)]
A licensed importer may engage in the business of importing or bringing explosive materials into the United States for purposes of sale or distribution. It is not necessary for a licensed importer to also obtain a dealer’s license or permit to engage in business on his or her licensed premises as a dealer in explosive materials.[27 CFR 555.11: definition of "importer", 27 CFR 555.41(b)(2)]
A licensed dealer may acquire and import explosives for his or her own use and engage in the business of distributing explosive materials at wholesale or retail. [27 CFR 555.11: definition of “dealer”]
Can federal explosives disabilities resulting from a conviction of a crime punishable by imprisonment for a term exceeding one year be removed if the conviction is expunged or set aside or the convicted person has received a pardon for the offense or has had his or her civil rights restored?A person convicted of, or under indictment for, a "crime punishable by imprisonment for a term exceeding one year" may not lawfully receive or possess explosive materials or be issued a federal explosives license or permit.The term "crime punishable by imprisonment for a term exceeding one year" does not include offenses pertaining to antitrust violations, unfair trade practices, restraints of trade, or any state offense (other than one involving a firearm or explosive) classified as a misdemeanor and punishable by imprisonment for 2 years or less.There are only 3 means by which federal explosives disabilities resulting from a conviction of, or indictment for, a "crime punishable by imprisonment for a term exceeding one year" can be removed:A decision of a court invalidating a conviction on the basis that the conviction was unconstitutional;In the case of a federal conviction, a presidential pardon; andThe granting of relief from federal explosives disabilities by ATF pursuant to the filing of a relief application with the Director. For more information, visit our webpage Apply for Relief of Explosives Disability.[18 U.S.C. 841(l), 842(d),(i), 845(b); 27 CFR 555.11: definition of "crime punishable by imprisonment for a term exceeding one year", 555.26(c), 555.142]
Yes. Display fireworks include, but are not limited to, salutes containing more than 2 grains (130 mg) of flash powder, aerial shells containing more than 40 grams of pyrotechnic compositions (excluding the lift charge), and other display pieces which exceed the limits of explosive materials for classification as "consumer fireworks". These fireworks are classified as fireworks UN0333, UN0334, or UN0335 by regulations of the U.S. Department of Transportation at 49 CFR 172.101. Display fireworks also include fused set pieces containing components which together exceed 50 mg of salute powder. Any fireworks defined as “display fireworks” in 27 CFR 555.11 may be lawfully received or transported only by persons who hold a valid license or permit. No ATF license or permit is required to receive or transport “consumer fireworks” or “articles pyrotechnic”.[18 U.S.C. 842(a)(3); 27 CFR 555.26, 555.141(a)(7); 27 CFR 555.11: definition of "display fireworks"]
(a)
General.
As provided by 26 U.S.C. 5812 and 26 U.S.C. 5822, an application to make or transfer a firearm shall be denied if the making, transfer, receipt, or possession of the firearm would place the maker or transferee in violation of law. Section 922(o), Title 18, U.S.C., makes it unlawful for any person to transfer or possess a machine gun, except a transfer to or by, or possession by or under the authority of, the United States or any depa..
Please send a written request to ATF’s Firearms Technology Branch, 244 Needy Road, Martinsburg, WV, 24505 or by fax at (304) 616–4301.[18 U.S.C. 921(a)(24); 26 U.S.C. 5845(a); 27 CFR 479.11]
Yes. If the machine gun was lawfully registered and possessed before May 19, 1986, it may be transferred pursuant to an approved ATF Form 4 (5320.4).[18 U.S.C. 922(o)(2), 26 U.S.C. 5812]
(1) The assembly of such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or
No, a license is not required to make a firearm solely for personal use. However, a license is required to manufacture firearms for sale or distribution. The law prohibits a person from assembling a non–sporting semiautomatic rifle or shotgun from 10 or more imported parts, as well as firearms that cannot be detected by metal detectors or x–ray machines. In addition, the making of an NFA firearm requires a tax payment and advance approval by ATF.[18 U.S.C. 922(o), (p) and (r); 26 U.S.C. 5822; 27 CFR 478.39, 479.62 and 479.105]
(1) Prior to making an over-the-counter transfer of a firearm to a non-licensee who is a resident of the State in which the licensee's business premises is located, the licensed importer, licensed manufacturer, or licensed dealer so transferring the firearm shall obtain a Form 4473 from the transferee showing the transferee's name, sex, residence address (including county or similar political subdivision and whether they reside within city limits), and date and place of birth; the height, weight..
Yes. All non-U.S. citizens need an alien number or admission number to purchase a firearm from a federal firearms licensee (FFL). A FFL cannot complete the sale without an alien or admission number. This is the case even if you have a state permit that ATF has determined qualifies as a "NICS alternative" and therefore do not need to have a NICS background check.
When a transaction takes place between unlicensed persons who reside in the same state, the Gun Control Act (GCA) does not require any record keeping. An unlicensed person may sell a firearm to another unlicensed person in their state of residence and, similarly, an unlicensed person may buy a firearm from another unlicensed person who resides in the same state. It is not necessary under federal law for a federal firearms licensee (FFL) to assist in the sale or transfer when the buyer and seller are “same–state” residents.There may be state or local laws or regulations that govern this type of transaction. Contact the office of your State Attorney General for information regarding any such requirements.
Part I used for over-the-counter sales must be completed, signed and dated by the buyer prior to delivery of the firearm. Part II (green form) used for intra-state non-over-the-counter sales must be completed, signed and dated in duplicate by the buyer at the time of sale. [27 CFR 478.124(c) and 478.124(f)]
(c) A person shown as possessing firearms by the records maintained by the Director pursuant to the National Firearms Act (26 U.S.C. Chapter 53) in force on October 31, 1968, shall be considered to have registered the firearms in his possession which are disclosed by that record as being in his possession on October 31, 1968.
No. The National Firearms Act (NFA) permits only manufacturers, makers, importers, and certain governmental entities to register firearms.[26 U.S.C. 5841(b) and 5861(d); 27 CFR 479.101(b) and 479.104]
Yes. The approved application received from ATF serves as evidence of registration of the NFA firearm. This document must be made available upon request of any ATF officer. It is suggested that a photocopy of the approved application be carried by the possessor when the weapon is being transported.[26 U.S.C. 5841(e); 27 CFR 479.101]
Only those firearms subject to the National Firearms Act (NFA) (e.g., machineguns, short–barreled rifles and shotguns, silencers, destructive devices, and firearms designated as “any other weapons”) must be registered with ATF.Firearms registration may be required by state or local law. Any person considering acquiring a firearm should contact their State Attorney General’s Office to inquire about the laws and possible state or local restrictions.[26 U.S.C. 5841; 27 CFR 479.101]]
(1) Licensed manufacturers. Licensed manufacturers who manufacture explosive materials for sale or distribution must place the following marks of identification on explosive materials at the time of manufacture:
Yes. Under 27 CFR § 555.109(c)(3), licensed importers must place the required marks on each cartridge, bag, or other immediate container of explosive materials that are imported for sale or distribution, as well as on any outside container used for the packaging of such explosive materials. The markings must also be included on each display candle and display cake.
No. If all of your imported fireworks are used for your company’s display shows, no import markings are required. However, any subsequent distribution of display fireworks without the proper markings required by 27 CFR § 555.109 would place you in violation of Federal explosives laws. Import markings are required to be placed on display fireworks for sale or distribution within 15 days following their release from U.S. Customs custody.
Federal regulations at 27 CFR § 555.109 require that you mark all explosive materials imported for sale or distribution. You need not mark those materials imported for your own use. However, the fact that the structure of your operations makes it difficult to distinguish materials imported for sale from those imported for your own use may make it practical for you to mark all of the imported display fireworks. Bear in mind that any materials to be sold or distributed must be marked within 15 days after release from U.S. Customs custody. Therefore, those materials not marked within 15 days may not be later marked and sold or otherwise distributed.
(a)
Interstate sales or deliveries.
A licensed importer, licensed manufacturer, licensed dealer, or licensed collector shall not sell or deliver any firearm to any person not licensed under this part and who the licensee knows or has reasonable cause to believe does not reside in (or if a corporation or other business entity, does not maintain a place of business in) the State in which the licensee's place of business or activity is located:
..
If the pawnbroker and nonlicensee are residents of the same state, the pawnbroker may return a handgun, long gun, or other firearm to either the person who pawned it or, where state and/or local law allows, a holder of the pawn ticket* who resides in the pawnbroker’s state.If the pawnbroker and nonlicensee are not residents of the same state:The pawnbroker may return a firearm to the person who pawned it.The pawnbroker may transfer a rifle or shotgun to the holder of a pawn ticket* who did not pawn it, provided the transaction complies with the conditions of sale in both the state where the pawnbroker is licensed and the state where the pawn ticket holder resides.* NOTE: The holder of the pawn ticket may acquire a firearm only if they are the actual “transferee/buyer” of the firearm. The holder of a pawn ticket may not acquire a firearm on behalf of another person.[18 U.S.C. 922(a)(2), 922(a)(3) and 922(b)(3)]
Generally, a firearm may not lawfully be sold by a licensee to a nonlicensee who resides in a state other than the state in which the seller’s licensed premises is located. However, the sale may be made if the firearm is shipped to a licensee whose business is in the purchaser’s state of residence and the purchaser takes delivery of the firearm from the licensee in his or her state of residence.In addition, a licensee may sell a rifle or shotgun to a person who is not a resident of the state where the licensee’s business premises is located in an over–the–counter transaction, provided the transaction complies with state law in the state where the licensee is located and in the state where the purchaser resides.[18 U.S.C. 922(b)(3); 27 CFR 478.99(a)]
(b) A record of each firearm disposed of by an importer and a separate record of armor piercing ammunition dispositions to governmental entities, for exportation, or for testing or experimentation authorized under the provisions of § 478.149 shall be maintained by the licensed importer on the licensed premises. The record shall show the date of such sale or other disposition, and the name and license number of the licensee to whom the firearm was transferred, or if disposed of to a nonlicensee, ..
Firearms received for sale on consignment must be entered in the licensee’s acquisition and disposition record. The sale of a consignment firearm is handled in the same manner as other firearm sales.Return of any consigned firearms by the licensee to the consignor must be entered in the licensee’s disposition record. An ATF Form 4473 and a NICS check must be completed prior to the return of such firearms.[18 U.S.C. 923(g); 27 CFR 478.122, 478.123, 478.124 and 478.125]
Dealer AcquisitionsGenerally, for licensed dealers the purchase or other acquisition of a firearm shall be recorded not later than the close of the next business day after the date of the acquisition or purchase.However, if commercial records containing the required information are available for inspection and are separate from other commercial documents, dealers have 7 days from the time of receipt to record the receipt in the acquisition and disposition (A&D) record.Manufacturer AcquisitionsEach licensed manufacturer shall record each firearm manufactured or otherwise acquired not later than the 7th day following the date of such manufacture or other acquisition.Importer AcquisitionsEach licensed importer shall within 15 days of the date of importation or other acquisition record the required information of each firearm imported or otherwise acquired.DispositionsAll licensees shall record sales or other dispositions not later than 7 days following date of the transaction. If a disposition is made before the acquisition has been entered in the A&D record, the acquisition entry must be made at the same time as the disposition entry.[18 U.S.C. 923(g)(1)(A); 27 CFR 478.122, 123, and 125]
(c) Licensees conducting business at locations other than the premises specified on their license under the provisions of paragraph (a) of this section shall maintain firearms records in the form and manner prescribed by subpart H of this part. In addition, records of firearms transactions conducted at such locations shall include the location of the sale or other disposition, be entered in the acquisition and disposition records of the licensee, and retained on the premises specified on the lic..
Depending on how the organization arranges for the firearms to be transferred to the raffle winner, the licensee’s participation may vary.Example 1A licensee transfers a firearm to the organization sponsoring the raffle. The representative acting on behalf of the organization must complete the ATF Form 4473 and undergo a NICS background check.When the buyer of a firearm is a corporation, association, or other organization, an officer or other representative authorized to act on behalf of the organization must complete the form with his or her personal information and attach a written statement, executed under penalties of perjury, stating that the firearm is being acquired for the use of the organization and the name and address of the organization.Once the firearm had been transferred to the organization, the organization can subsequently transfer the firearm to the raffle winner without an ATF Form 4473 being completed or a NICS check being conducted. This is because the organization is not a licensee.However, the organization cannot transfer the firearm to a person who is not a resident of the organization’s state of residence nor can the organization knowingly transfer the firearm to a prohibited person.Example 2The licensee or a representative of the licensee brings a firearm to the raffle so that the firearm can be displayed. After the raffle, the firearm is returned to the licensee’s premises. The licensee must complete an ATF Form 4473 and conduct a NICS background check prior to transferring the firearm to the winner of the raffle.If the firearm is a handgun, the winner of the raffle must be a resident of the state where the transfer takes place, or the firearm must be transferred through another licensee in the winner’s state of residence.If the firearm is a rifle or shotgun, the licensee can lawfully transfer the firearm to the winner of the raffle as long as the transaction is over-the-counter and complies with the laws applicable at the place of sale and the state where the transferee resides.Example 3If the raffle meets the definition of a qualifying event, the licensee may conduct business at that event.Please note, if the organization’s practice of raffling firearms rises to the level of being engaged in the business of dealing in firearms, the organization must get its own federal firearms license.[18 U.S.C. 922(a)(5), 922(b)(3), 922(t), and 923(j); 27 CFR 478.99, 478.100, 478.102, and 478.124]
Yes. A licensee conducting business temporarily at a gun show must comply with the background check provisions in the same manner as if the sale were taking place at the licensed premises.[18 U.S.C. 922(t) and 923(j); 27 CFR 478.100 and 478.102]
The burden of proof is affirmatively on any person importing or bringing the firearm into the United States or any territory under its control or jurisdiction to show that the firearm is being imported or brought in under one of the above paragraphs. Any person desiring to import or bring a firearm into the United States under this paragraph shall file with the Director an application on Form 6 (Firearms), Application and Permit for Importation of Firearms, Ammunition and Implements of War, in t..
(a) Law enforcement officers purchasing firearms for official use who provide the licensee with a certification on agency letterhead, signed by a person in authority within the agency (other than the officer purchasing the firearm), stating that the officer will use the firearm in official duties and that a records check reveals that the purchasing officer has no convictions for misdemeanor crimes of domestic violence are not required to complete Form 4473 or Form 5300.35. The law enforcement of..
Yes. Law enforcement officers purchasing firearms for official use who provide a licensee with a certification on agency letterhead that the officer will use the firearm in official duties and that a records check reveals the purchasing officer has no convictions for misdemeanor crimes of domestic violence are not required to complete a ATF Form 4473 or undergo a background check. An officer purchasing a firearm for official duties may purchase the firearm from a licensee in any state, regardless of where the officer resides or the agency is located.Disposition of a firearm to an officer must be entered into the licensee’s acquisition and disposition record, and the certification letter used to purchase the firearm must be retained in the licensee’s files. Contact your state’s Attorney General’s Office to ensure there is no state prohibition on such sales.[18 U.S.C. 925(a)(1); 27 CFR 478.134 and 478.141]
(c) Each licensee and permittee shall maintain all records of importation, production, shipment, receipt, sale, or other disposition, whether temporary or permanent, of explosive materials as the regulations in this part prescribe. Sections 842(f) and 842(g) of the Act make it unlawful for any licensee or permittee knowingly to make any false entry in, or fail to make entry in, any record required to be kept under the Act and the regulations in this part.
(a)
Records prior to Act.
Licensed importers and licensed manufacturers may dispose of records of sale or other disposition of firearms prior to December 16, 1968. Licensed dealers and licensed collectors may dispose of all records of firearms transactions that occurred prior to December 16, 1968.
Licensees shall retain each Form 4473 until business or licensed activity is discontinued, either on paper, or in an electronic alternate method approved by the Director, at the business premises readily accessible for inspection under this part. Paper forms over 20 years of age may be stored at a separate warehouse, which shall be considered part of the business premises for this purpose and subject to inspection under this part. Forms 4473 shall be retained in the licensee's records as provided in § 478.124(b), provided that Forms 4473 with respect to which a sale, delivery, or transfer did not take place shall be separately retained in alphabetical (by name of transferee) or chronological (by date of transferee's certification) order.[18 U.S.C. 923(g)(1)(A); 27 CFR 478.129(b)]
(a) Notwithstanding any other provision of this subpart, a licensed manufacturer, licensed importer, or licensed dealer is not required to comply with the provisions of § 478.102 or record on a firearms transaction record, Form 4473,
the sale or other disposition of a firearm maintained as part of the licensee's personal firearms collection:
Provided,
That
Yes; however, such firearms must be kept segregated from the licensee’s business inventory. A presumption exists that all firearms on a licensee’s business premises are for sale and must be entered in the licensee’s bound book. Licensees should appropriately identify or tag personal firearms as “not for sale.”
(iii) It will not be necessary for a licensed importer or a licensed manufacturer (for purposes of sale or distribution) to also obtain a dealer's license in order to engage in business on his licensed premises as a dealer in explosive materials. No licensee will be required to obtain a user permit to lawfully transport, ship, or receive explosive materials in interstate or foreign commerce.
You can request an application for a federal explosives license or permit from the Federal Explosives Licensing Center at 877-283-3352 or from the ATF Distribution Center at 703-870-7526 or 703-870-7528. As part of the application process, you must complete and submit an ATF Form 5400.13/5400.16, Application for Explosives License or Permit. You must also submit the names, identifying information, fingerprints, and photographs of all responsible persons on ATF Form 5400.13A/5400.16, Explosives Responsible Person Questionnaire. In addition, you must submit the names and identifying information of all employees who are authorized to possess explosive materials in the course of their employment on ATF Form 5400.28, Employee Possessor Questionnaire. [27 CFR 555.45(c)]
(b) Distributions of surplus stocks. Permittees are not authorized to engage in the business of sale or distribution of explosive materials. However, permittees may dispose of surplus stocks of explosive materials to other licensees or permittees in accordance with § 555.103 and § 555.105.
Until the compounds are mixed, they are not classified as explosives and, therefore, are not subject to control. However, once mixed, binary explosives are "explosive materials" and are subject to all applicable federal requirements.A person who mixes or combines compounds of binary explosives for the purpose of sale or distribution or for the person’s own business use is a "manufacturer" of explosive materials and must be licensed as a manufacturer under the law.[18 U.S.C. 841(h); 27 CFR 555.11: definition of "manufacturer"]
(a) Except for adjustment or repair of a firearm that is returned to the person from whom it was received on the same day, each licensed manufacturer shall record the name of the manufacturer and importer (if any), type, model, caliber or gauge, and serial number (including any associated license number either as a prefix, or if remanufactured or imported, separated by a semicolon) of each firearm manufactured or otherwise acquired (including a frame or receiver to be disposed of separately), th..
You can print or download a fillable AFMER form from ATF’s Forms Library or obtain them from the ATF Distribution Center by calling 703-870-7526 or 703-870-7528 and asking for ATF Form 5300.11.
Any person desiring to export a firearm without payment of the transfer tax must file with the Director an application on Form 9 (Firearms), Application and Permit for Exportation of Firearms, in quadruplicate, for a permit providing for deferment of tax liability. Part 1 of the application shall show the name and address of the foreign consignee, number of firearms covered by the application, the intended port of exportation, a complete description of each firearm to be exported, the name, addr..
The export of defense articles under the Arms Export Control Act (AECA) generally requires a license for export issued in accordance with the AECA and the regulations promulgated thereunder. The Department of State's Directorate of Defense Trade Controls (DDTC) administers AECA export controls and licensing for defense articles enumerated on the U.S. Munitions List (USML) in the International Traffic in Arms Regulations (ITAR) at 22 CFR § 121.1. Additional information may be obtained from DDTC by either contacting the DDTC Response Team at (202) 663-1282, or by visiting their website at https://www.pmddtc.state.gov/ddtc_public.The Department of Commerce's Bureau of Industry and Security (BIS) administers export controls for items on the Commerce Control List (CCL), including shotguns with a barrel length of 18 inches or more and related components, muzzle loading rifles and handguns, air guns, replica firearms, and shotgun shells and components, pursuant to the International Emergency Economic Powers Act and Part 774 of the Export Administration Regulations. Additional information may be obtained from BIS by contacting an export counselor at (202) 482-4811, or by visiting their website at www.bis.doc.gov/index.php/policy-guidance/product-guidance/firearms.Any person who wishes to export a firearm subject to the National Firearms Act must submit ATF Form 9 (5320.9), Application and Permit for Permanent Exportation of Firearms and obtain approval from ATF prior to export.[22 U.S.C. § 2778; 26 U.S.C. § 5854; 27 CFR § 479.114–479.119]
A single sale, unattended by circumstances showing the one making the sale to be engaged in business, does not create special (occupational) tax liability.
The sale or delivery by a licensee of any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle, to any person other than another licensee who is licensed under this part to deal in such device or firearm, is prohibited unless the person to receive such device or firearm furnishes to the licensee a sworn statement setting forth
An applicant, licensee, or permittee may represent himself, or be represented by an attorney, a certified public accountant, or any other person, specifically designated in a duly executed power of attorney that shall be filed in the proceeding by the applicant, licensee, or permittee. The applicant, licensee, or permittee shall file waivers, if applicable, under the Privacy Act of 1974 and 26 U.S.C. 6103(c) (confidentiality and disclosure of returns and return information). The Director of Indu..
An applicant, licensee, or permittee may represent himself, or be represented by an attorney, a certified public accountant, or any other person, specifically designated in a duly executed power of attorney that shall be filed in the proceeding by the applicant, licensee, or permittee. The applicant, licensee, or permittee shall file waivers, if applicable, under the Privacy Act of 1974 and 26 U.S.C. 6103(c) (confidentiality and disclosure of returns and return information). The Director of Indu..
Any person who engages in a business taxable under 26 U.S.C. 5801, without timely payment of the tax imposed with respect to such business (see § 479.34) shall be liable for such tax, plus the interest and penalties thereon (see 26 U.S.C. 6601 and 6651). In addition, such person may be liable for criminal penalties under 26 U.S.C. 5871.
All of the provisions of the internal revenue laws not inconsistent with the provisions of 26 U.S.C. Chapter 53 shall be applicable with respect to the taxes imposed by 26 U.S.C. 5801, 5811, and 5821 (see 26 U.S.C. 5846).
(1)
Frame or receiver classifications based on which part of the weapon was classified as such before
April 26, 2022. Except as provided in paragraph (f)(2) of this section, the terms "frame" and "receiver" shall include the specific part of a complete weapon, including variants thereof, determined (classified) by the Director to be defined as a firearm frame or receiver prior to April 26, 2022. Any such part that is identified with an importer's or m..
Any firearm involved in any violation of the provisions of 26 U.S.C. Chapter 53, shall be subject to seizure, and forfeiture under the internal revenue laws:
Provided, however,
That the disposition of forfeited firearms shall be in conformance with the requirements of 26 U.S.C. 5872. In addition, any vessel, vehicle or aircraft used to transport, carry, convey or conceal or possess any firearm with respect to which there has been committed any violation ..
Any person who violates or fails to comply with the requirements of 26 U.S.C. Chapter 53 shall, upon conviction, be subject to the penalties imposed under 26 U.S.C. 5871.
Any explosive materials involved or used or intended to be used in any violation of the Act or of this part or in any violation of any criminal law of the United States are subject to seizure and forfeiture, and all provisions of title 26, U.S.C. relating to the seizure, forfeiture, and disposition of firearms, as defined in 26 U.S.C. 5845(a), will, so far as applicable, extend to seizures and forfeitures under the Act. (See § 72.27 of this title for regulations on summary destruction of explosi..
(a)
Armor piercing ammunition sales by licensed collectors to nonlicensees.
The sale or other disposition of armor piercing ammunition by licensed collectors shall be recorded in a bound record at the time a transaction is made. The bound record shall be maintained in chronological order by date of sale or disposition of the armor piercing ammunition, and shall be retained on the licensed premises of the licensee for a period not less than two years foll..
The provisions of §§ 478.37 and 478.99(d) with respect to the manufacture or importation of armor piercing ammunition and the sale or delivery of armor piercing ammunition by manufacturers and importers shall not apply to the manufacture, importation, sale or delivery of armor piercing ammunition for the purpose of testing or experimentation as authorized by the Director. A person desiring such authorization to receive armor piercing ammunition shall submit a letter application, in duplicate, to..
The provisions of § 478.98 with respect to the sale or delivery of destructive devices, machine guns, short-barreled shotguns, and short-barreled rifles shall not apply to the sale or delivery of such devices and weapons to any research organization designated by the Director to receive same. A research organization desiring such designation shall submit a letter application, in duplicate, to the Director. Such application shall contain the name and address of the research organization, the name..
(a) All of those items on the U.S. Munitions Import List (see § 447.21) which are “firearms” or “ammunition” as defined in 18 U.S.C. 921(a) are subject to the interstate and foreign commerce controls contained in Chapter 44 of Title 18 U.S.C. and 27 CFR Part 478 and if they are “firearms” within the definition set out in 26 U.S.C. 5845(a) are also subject to the provisions of 27 CFR Part 479. Any person engaged in the business of importing firearms or ammunition as defined in 18 U.S.C. 921(a) mu..
Applicants or licensees may represent themselves or be represented by an attorney, a certified public accountant, or any other person, specifically designated in a duly executed power of attorney that shall be filed in the proceeding by the applicant or licensee. The applicant or licensee shall file waivers, if applicable, under the Privacy Act of 1974 and 26 U.S.C. 6103(c) (confidentiality and disclosure of returns and return information). The Director of Industry Operations may be represented ..
(a)
General.
Effective January 1, 1988, 26 U.S.C. 5801(b) provides for a reduced rate of special tax with respect to any importer or manufacturer whose gross receipts (for the most recent taxable year ending before the first day of the taxable period to which the special tax imposed by § 479.32 relates) are less than $500,000. The rate of tax for such an importer or manufacturer is $500 per year or fraction thereof. The “taxable year” to be used for dete..
A stamp once affixed to one document cannot lawfully be removed and affixed to another. Any person willfully reusing such a stamp shall be subject to the penalty prescribed by 26 U.S.C. 7208.
Where a firearm which has been made in compliance with 26 U.S.C. 5821, and the regulations contained in this part, is to be transferred subsequently, the transfer provisions of the firearms laws and regulations must be complied with. (See subpart F of this part).
No information or evidence obtained from an application, registration, or record required to be submitted or retained by a natural person in order to comply with any provision of 26 U.S.C. Chapter 53, or this part or section 207 of the Gun Control Act of 1968 shall be used, directly or indirectly, as evidence against that person in a criminal proceeding with respect to a violation of law occurring prior to or concurrently with the filing of the application or registration, or the compiling of th..
The Director shall determine in accordance with 26 U.S.C. 5845(f), whether a device is excluded from the definition of a destructive device. A person who desires to obtain a determination under that provision of law for any device which he believes is not likely to be used as a weapon shall submit a written request, in triplicate, for a ruling thereon to the Director. Each such request shall be executed under the penalties of perjury and contain a complete and accurate description of the device,..
The Director shall determine in accordance with 26 U.S.C. 5845(a), whether a firearm or device, which although originally designed as a weapon, is by reason of the date of its manufacture, value, design, and other characteristics primarily a collector's item and is not likely to be used as a weapon. A person who desires to obtain a determination under that provision of law shall follow the procedures prescribed in § 479.24 relating to destructive device determinations, and shall include informat..
(a)
General.
Special tax shall be paid by return. The prescribed return is ATF Form 5630.7, Special Tax Registration and Return. Special tax returns, with payment of tax, shall be filed with ATF in accordance with instructions on the form. Properly completing, signing, and timely filing of a return (Form 5630.7) constitutes compliance with 26 U.S.C. 5802.
(a)
Requirement.
The employer identification number (defined in 26 CFR 301.7701-12) of the taxpayer who has been assigned such a number shall be shown on each special tax return, including amended returns, filed under this subpart. Failure of the taxpayer to include the employer identification number may result in the imposition of the penalty specified in § 70.113 of this chapter.
A person shall pay the special (occupational) tax for each location where he engages in any business taxable under 26 U.S.C. 5801. However, a person paying a special (occupational) tax covering his principal place of business may utilize other locations solely for storage of firearms without incurring special (occupational) tax liability at such locations. A manufacturer, upon the single payment of the appropriate special (occupational) tax, may sell firearms, if such firearms are of his own man..
If more than one business taxable under 26 U.S.C. 5801, is carried on at the same location during a taxable year, the special (occupational) tax imposed on each such business must be paid. This section does not require a qualified manufacturer or importer to qualify as a dealer if such manufacturer or importer also engages in business on his qualified premises as a dealer. However, a qualified manufacturer who engages in business as an importer must also qualify as an importer. Further, a qualif..
This part contains the procedural and substantive requirements relative to the importation, manufacture, making, exportation, identification and registration of, and the dealing in, machine guns, destructive devices and certain other firearms under the provisions of the National Firearms Act (26 U.S.C. Chapter 53).
(3) Wood frame wall construction. The exterior of outer wood walls is to be covered with iron or aluminum not less than number 26-gauge. An inner wall of, or covered with nonsparking material will be constructed so as to provide a space of not less than six inches between the outer and inner walls. The space is to be filled with coarse, dry sand or weak concrete.
(i) Wood indoor magazines are to have sides, bottoms and doors constructed of at least two inches of hardwood and are to be well braced at the corners. They are to be covered with sheet metal of not less than number 26-gauge (.0179 inches). Nails exposed to the interior of magazines must be countersunk.
(a) Any contraband cigarettes involved in any violation of the provisions of 18 U.S.C. chapter 114 shall be subject to seizure and forfeiture. All provisions of the Internal Revenue Code of 1954 (title 26 U.S.C.) relating to the seizure, forfeiture, and disposition of firearms, as defined in section 5845(a) of that Code, shall, so far as applicable, extend to seizures and forfeitures of contraband cigarettes under the provisions of 18 U.S.C. chapter 114.
Whoever knowingly imports into the United States contrary to law any article on the U.S. Munitions Import List; or receives, conceals, buys, sells, or in any manner facilitates its transportation, concealment, or sale after importation, knowing the same to have been imported contrary to law, shall be fined not more than $10,000 or imprisoned not more than 5 years, or both; and the merchandise so imported, or the value thereof shall be forfeited to the United States.
Licenses issued under this part are not transferable. In the event of the lease, sale, or other transfer of the operations authorized by the license, the successor must obtain the license required by this part prior to commencing such operations. However, for rules on right of succession, see § 478.56.
(1) A licensed importer, licensed manufacturer, or licensed dealer whose sale, delivery, or transfer of a firearm is made pursuant to the alternative provisions of § 478.102(d) and is not subject to the NICS check prescribed by § 478.102(a) shall maintain the records required by paragraph (a) of this section.
(c) Each licensed importer, licensed manufacturer, licensed dealer, and licensed collector shall maintain such records of importation, production, shipment, receipt, sale, or other disposition, whether temporary or permanent, of firearms and such records of the disposition of ammunition as the regulations contained in this part prescribe. Section 922(m) of the Act makes it unlawful for any licensed importer, licensed manufacturer, licensed dealer, or licensed collector knowingly to make any fals..
Licenses and permits issued under this part are not transferable to another person. In the event of the lease, sale, or other transfer of the business or operations covered by the license or permit, the successor must obtain the license or permit required by this part before commencing business or operations. However, for rules on right of succession, see § 555.59.
(iii)
Multi-piece frame or receiver.
In the case of a multi-piece frame or receiver, the modular subpart that is the outermost housing or structure designed to house, hold, or contain either the primary energized component of a handgun, breech blocking or sealing component of a projectile weapon other than a handgun, or internal sound reduction component of a firearm muffler or firearm silencer, as the case may be, shall be the subpart of the multi-pi..
Notwithstanding any other provision of this part, a licensed importer may import all rifles and shotguns classified by the Director as curios or relics, and all handguns classified by the Director as curios or relics that are determined to be generally recognized as particularly suitable for or readily adaptable to sporting purposes. The importation of such curio or relic firearms must be in accordance with the applicable importation provisions of this part and the importation provisions of 27 C..
(3)
Multi-piece frame or receiver.
In the case of a multi-piece frame or receiver, the modular subpart that is the outermost housing or structure designed to house, hold, or contain either the primary energized component of a handgun, breech blocking or sealing component of a projectile weapon other than a handgun, or internal sound reduction component of a firearm muffler or firearm silencer, as the case may be, shall be the subpart of a multi-piece ..
Any ATF officer or employee of the Bureau of Alcohol, Tobacco, Firearms, and Explosives duly authorized to perform any function relating to the administration or enforcement of this part may enter during business hours the premises (including places of storage) of any importer or manufacturer of or dealer in firearms, to examine any books, papers, or records required to be kept pursuant to this part, and any firearms kept by such importer, manufacturer or dealer on such premises, and may require..
(c) The transferor shall be responsible for establishing the exempt status of the transferee before making a transfer under the provisions of this section. Therefore, before engaging in transfer negotiations with the transferee, the transferor should satisfy himself as to the claimed exempt status of the transferee and the bona fides of the transaction. If not fully satisfied, the transferor should communicate with the Director, report all circumstances regarding the proposed transfer, and await..
(c) The transferor shall be responsible for establishing the exempt status of the transferee before making a
transfer under the provisions of this section. Therefore, before engaging in transfer negotiations with the transferee, the transferor should satisfy himself of the claimed exempt status of the transferee and the bona fides of the transaction. If not fully satisfied, the transferor should communicate with the Director, report all circumsta..
An unserviceable firearm may be transferred as a curio or ornament without payment of the transfer tax. However, the procedures for the transfer of a firearm as provided in § 479.90 shall be followed in a tax-exempt transfer of a firearm under this section, except a statement shall be entered on the transfer application, Form 5 (Firearms), by the transferor that he is entitled to the exemption because the firearm to be transferred is unservicable and is being transferred as a curio or ornament. ..
As indicated in this part, the transfer tax or tax on the making of a firearm is ordinarily paid by the purchase and affixing of stamps, while special tax stamps are issued in payment of special (occupational) taxes. However, in exceptional cases, transfer tax, tax on the making of firearms, and/or special (occupational) tax may be paid pursuant to assessment. Claims for refunds of such taxes, paid pursuant to assessment, shall be filed on ATF Form 2635 (5620.8) within 3 years next after payment..
(a) Firearms and ammunition may be brought into the United States or any possession thereof by any person who can establish to the satisfaction of Customs that such firearm or ammunition was previously taken out of the United States or any possession thereof by such person. Registration on Customs Form 4457 or on any other registration document available for this purpose
may be completed before departure from the United States at any U.S. customhouse or ..