Destructive device.
(a) Any explosive, incendiary, or poison gas (1) bomb, (2) grenade, (3) rocket having a propellant charge of more than 4 ounces, (4) missile having an explosive or incendiary charge of more than one-quarter ounce, (5) mine, or (6) device similar to any of the devices described in the preceding paragraphs of this definition; (b) any type of weapon (other than a shotgun or a shotgun shell which the Director finds is generally recognized as particularly suit..
(ii)
Destructive devices.
In the case of a destructive device, the Director may authorize other means of identification to identify that weapon upon receipt of a letter application or prescribed form from the licensee. The application shall show that engraving, casting, or stamping (impressing) such a weapon as required by this section would be dangerous or impracticable and that the alternate means of identification proposed will not hinder the effec..
Destructive device.
(a) Any explosive, incendiary, or poison gas (1) bomb, (2) grenade, (3) rocket having a propellent charge of more than 4 ounces, (4) missile having an explosive or incendiary charge of more than one-quarter ounce, (5) mine, or (6) similar device; (b) any type of weapon by whatever name known which will, or which may be readily converted to, expel a projectile by the action of an explosive or other propellant, the barrel or barrels of which have a bore of ..
The following weapons are regulated under the National Firearms Act (NFA):A shotgun having a barrel or barrels of less than 18 inches in length;A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length;A rifle having a barrel or barrels of less than 16 inches in length;A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length;Any other weapon, as defined in subsection (e);A machinegun;Any silencer (as defined in section 921 of title 18, United States Code); andA destructive device.[26 U.S.C. 5845; 27 CFR 479.11]
The terms “firearm silencer” and “firearm muffler” mean any device for silencing, muffling, or diminishing the report of a portable firearm, including any combination of parts, designed or redesigned, and intended for use in assembling or fabricating a firearm silencer or firearm muffler, and any part intended only for use in such assembly or fabrication.Numerous paintball and airgun silencers tested by ATF’s Firearms Technology Branch have been determined to be firearm silencers by nature of their design and function. Because silencers are NFA weapons, an individual wishing to manufacture or transfer such a silencer must receive prior approval from ATF and pay the required tax.[26 U.S.C. 5845; 27 CFR 479.11]
Unloaded or dummy grenades, artillery shell casings, and similar devices, which are cut or drilled in an ATF-approved manner so that they cannot be used as ammunition components for destructive devices, are not considered NFA weapons.
Consumer fireworks. Any small firework device designed to produce visible effects by combustion and which must comply with the construction, chemical composition, and labeling regulations of the U.S. Consumer Product Safety Commission, as set forth in title 16, Code of Federal Regulations, parts 1500 and 1507. Some small devices designed to produce audible effects are included, such as whistling devices, ground devices containing 50 mg or less of explosive materials, and aerial devices containin..
If the individual purchasing the binary explosives is engaged in the business of manufacturing explosives, i.e., mixes and uses them in the operation of a commercial business (for example, operating a quarry, or providing the service of removing stumps or boulders from a farm field), then a manufacturer’s license is required.An individual farmer who merely wishes to mix the binary explosives to remove obstacles from his field and provides no other outside service would not need a manufacturer’s license.Please note, however: A Federal explosives license or permit would be required to obtain any explosive device, such as detonators, used to initiate the mixed binary explosives. In addition, transportation of any explosive material, including mixed binary explosives, without a Federal license or permit is prohibited. [27 CFR 555.11: Definition of "manufacturer"; 27 CFR 555.26, 555.41(b)]
Black powder is an explosive material for purposes of federal explosives laws and regulations.However, the law exempts from regulation commercially manufactured black powder in quantities not exceeding 50 pounds (as well as percussion caps, safety and pyrotechnic fuses, quills, quick and slow matches, and friction primers) intended to be used solely for sporting, recreational, or cultural purposes in antique firearms as defined in 18 U.S.C. 921(a)(16) or in antique devices exempted from the term "destructive device" in 18 U.S.C. 921(a)(4).Regardless, persons engaged in the business of importing, manufacturing, or dealing in black powder in any quantity must have a federal explosives license, and comply with recordkeeping, storage and conduct of business requirements.[18 U.S.C. 841(c), 841(d), 845(a)(5); 27 CFR 555.11: definitions of "explosives" and "explosive materials", 555.141(b)]
Generally, the importation, distribution, and storage of fireworks defined as consumer fireworks are exempted from the provisions of the federal explosives laws. However, because they contain pyrotechnic compositions classed by ATF as explosive materials, the manufacture of consumer fireworks requires a manufacturer’s license. In addition, pyrotechnic compositions used in the manufacture of consumer fireworks must be stored in accordance with regulations in 27 CFR Subpart K. Consumer fireworks are defined as "any small firework device designed to produce visible effects by combustion and which must comply with the construction, chemical composition, and labeling regulations of the U.S. Consumer Product Safety Commission, as set forth in Title 16, Code of Federal Regulations, parts 1500 and 1507. Some small devices designed to produce audible effects are included, such as whistling devices, ground devices containing 50 mg or less of flash powder, and aerial devices containing 130 mg or less of flash powder. Consumer fireworks are classified as fireworks UN0336 and UN0337 by the U.S. Department of Transportation at 49 CFR 172.101. This term does not include fused set pieces containing components which together exceed 50 mg of salute powder."[27 CFR 555.11: definition of "consumer fireworks"; definition of "licensed manufacturer", 555.141(a)(7)]
Federal explosives regulations generally exempt the importation, distribution, and storage of items classified as UN0431 or UN0432 explosives―by the U.S. Department of Transportation (DOT) at 49 CFR 172.101―and generally known as “articles pyrotechnic.” However, not all items classified by DOT as articles pyrotechnic are exempt from ATF regulations. To be exempt, the items must meet all criteria found in the definition for “articles pyrotechnic” at 27 CFR 555.11, “Pyrotechnic devices for professional use similar to consumer fireworks in chemical composition and construction but not intended for consumer use. Such articles meeting the weight limits for consumer fireworks but not labeled as such and classified by U.S. Department of Transportation regulations in 49 CFR 172.101 as UN0431 or UN0432.” In evaluating whether a particular device is exempt under 27 CFR 555.141(a)(7), ATF considers, in part, the intended use and function of the device, net explosive weight, chemical composition, and construction.Because they contain pyrotechnic compositions classed by ATF as explosive materials, the manufacture of items defined as “articles pyrotechnic” requires an ATF manufacturer’s license. In addition, pyrotechnic compositions used in the manufacture of articles pyrotechnic must be stored in accordance with regulations in 27 CFR Subpart K. The [27 CFR 555.11: definitions of “articles pyrotechnic” and “consumer fireworks”, 555.141(a)(7)]
The Director shall determine in accordance with 18 U.S.C. 921(a)(4) whether a device is excluded from the definition of a destructive device. A person who desires to obtain a determination under that provision of law for any device which he believes is not likely to be used as a weapon shall submit a written request, in triplicate, for a ruling thereon to the Director. Each such request shall be executed under the penalties of perjury and contain a complete and accurate description of the device..
Generally, no. Muzzleloading cannons manufactured in or before 1898 (and replicas thereof) that are not capable of firing fixed ammunition are considered antiques and not subject to the provisions of either the Gun Control Act (GCA) or National Firearms Act (NFA).[26 U.S.C. 5845; 27 CFR 479.11]
(a) The Director may authorize a person to transport in interstate or foreign commerce any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle, if he finds that such transportation is reasonably necessary and is consistent with public safety and applicable State and local law. A person who desires to transport in interstate or foreign commerce any such device or weapon shall submit a written request so to do, in duplicate, to the Director. The request shall contain:
A registered possessor of an NFA firearm, other than a federal firearms licensee/special occupational taxpayer (FFL/SOT), may not lawfully transport in interstate or foreign commerce any destructive device, machinegun, short-barreled shotgun or short-barreled rifle without prior written approval of ATF, specifically the NFA Branch.Approval for the transportation may be obtained by either a written request, or an approved application filed with ATF on Form 5320.20, Application to Transport Interstate or to Temporarily Export Certain NFA Firearms. Please note that applications to transport NFA firearms will be approved only if consistent with all state and local laws.[18 U.S.C. § 922(a)(4); 27 CFR § 478.28]
Yes, unless the registered possessor is a qualified dealer, manufacturer or importer, or a licensed collector transporting only curios or relics. Prior approval must be obtained, even if the move is temporary. Approval is requested by either submitting a letter containing all necessary information, or by submitting ATF Form 5320.20, Application to Transport Interstate or to Temporarily Export Certain National Firearms Act (NFA) Firearms. This requirement does not apply to the lawful interstate transportation of silencers. Possession of the firearms also must comply with all state and local laws.[18 U.S.C. 922(a)(4); 27 CFR 478.28]
(b) Black powder. Except for the provisions applicable to persons required to be licensed under subpart D, this part does not apply with respect to commercially manufactured black powder in quantities not to exceed 50 pounds, percussion caps, safety and pyrotechnic fuses, quills, quick and slow matches, and friction primers, if the black powder is intended to be used solely for sporting, recreational, or cultural purposes in antique firearms, as defined in 18 U.S.C. 921(a)(16) or antique devices..
If 50 pounds or less of commercially manufactured black powder is being purchased, and the powder is intended to be used solely for sporting, recreational, or cultural purposes in antique firearms as defined in 18 U.S.C. 921(a)(16) or in antique devices exempt from the term "destructive device" in 18 U.S.C. 921(a)(4), no form is required. However, if the black powder is being purchased for any other purpose (regardless of quantity), the purchaser or other transferee must possess a federal explosives license or permit.[18 U.S.C. 845(a)(5); 18 U.S.C. 926(c); 27 CFR 555.141(b), 555.26(a)]
Except for those items and activities given exempt status under 18 U.S.C. 845 (also see 27 CFR 555.141), or exempted under 27 CFR 555.32, Special Explosives Devices, all persons who store explosive materials must store them in conformity with the provisions of sub part K of the regulations.[18 U.S.C. 842(j); 27 CFR 555.29, 555.141, 555.201(a)]
(b) Each person intending to engage in business as a firearms or ammunition importer or manufacturer, or dealer in firearms shall file an application, with the required fee (see § 478.42), with ATF in accordance with the instructions on the form (see § 478.44), and, pursuant to § 478.47, receive the license required for such business from the Chief, Federal Firearms Licensing Center. Except as provided in § 478.50, a license must be obtained for each business and each place at which the applican..
Yes. A manufacturer of firearms may also manufacture ammunition (not including destructive device ammunition or armor piercing ammunition) without obtaining a separate license as a manufacturer of ammunition.
The Director shall determine in accordance with 26 U.S.C. 5845(f), whether a device is excluded from the definition of a destructive device. A person who desires to obtain a determination under that provision of law for any device which he believes is not likely to be used as a weapon shall submit a written request, in triplicate, for a ruling thereon to the Director. Each such request shall be executed under the penalties of perjury and contain a complete and accurate description of the device,..
The sale or delivery by a licensee of any destructive device, machine gun, short-barreled shotgun, or short-barreled rifle, to any person other than another licensee who is licensed under this part to deal in such device or firearm, is prohibited unless the person to receive such device or firearm furnishes to the licensee a sworn statement setting forth
Machinegun.
A “machinegun”, “machine pistol”, “submachinegun”, or “automatic rifle” is a firearm which shoots, is designed to shoot, or can be readily restored to shoot, automatically more than one shot, without manual reloading, by a single function of the trigger. The term shall also include the frame or receiver of any such weapon, any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a ma..
It is generally unlawful to import a machine gun into the United States for unrestricted sale. However, machine guns that are properly destroyed to ATF specifications may be imported.A machine-gun parts kit is generally importable so long as the kit does not include a machine gun, barrel, frame or receiver. Note that machine gun destruction to ATF specifications will generally render a machine-gun parts kit importable in this respect (destroying a kit’s barrel, and/or frame, and/or receiver to ATF specifications so they are no longer considered a barrel, frame or receiver will generally render the kit importable in this respect).Importations are subject to country restrictions. For example, machine-gun parts kits from firearms manufactured in Russia or one of the former Soviet States are not importable. Machinegun parts kits (excluding the frame, receiver or barrel) from a surplus military U.S.-origin machine gun will also require retransfer authorization from the U.S. Department of State.For more information, see ATF Rulings 2003-1, 2003-2, 2003-3 and 2003-4.[18 U.S.C. § 922(o); 26 U.S.C. § 5844; 22 U.S.C. § 2778; 27 CFR § 447.11, 447.21, 447.41, 447.52]
The Director may exempt certain explosive actuated devices, explosive actuated tools, or similar devices from the requirements of this part. A person who desires to obtain an exemption under this section for any special explosive device, which as designed does not constitute a public safety or security hazard, shall submit a written request to the Director. Each request shall be executed under the penalties of perjury and contain a complete and accurate description of the device, the name and ad..
(a) Any person who applies to be a licensed firearms dealer must certify on ATF Form 7 (5310.12), Application for Federal Firearms License, that compatible secure gun storage or safety devices will be available at any place where firearms are sold under the license to nonlicensed individuals (subject to the exception that in any case in which a secure gun storage or safety device is temporarily unavailable because of theft, casualty, loss, consumer sales, backorders from a manufacturer, or any o..
(7) A licensee or permittee disposing of surplus stock may sell or distribute commercially manufactured black powder in quantities of 50 pounds or less to a holder of a limited permit, nonlicensee, or nonpermittee if the black powder is intended to be used solely for sporting, recreational, or cultural purposes in antique firearms as defined in 18 U.S.C. 921(a)(16), or in antique devices as exempted from the term “destructive device” in 18 U.S.C. 921(a)(4).
The Director shall determine in accordance with 26 U.S.C. 5845(a), whether a firearm or device, which although originally designed as a weapon, is by reason of the date of its manufacture, value, design, and other characteristics primarily a collector's item and is not likely to be used as a weapon. A person who desires to obtain a determination under that provision of law shall follow the procedures prescribed in § 479.24 relating to destructive device determinations, and shall include informat..
(b) Was plastic explosive that, by April 24, 1999, will be or is incorporated in a military device within the territory of the United States and remains an integral part of such military device, or is intended to be, or is incorporated in, and remains an integral part of a military device that is intended to become, or has become, the property of any agency of the United States performing military or police functions (including any military reserve component) or the National Guard of any State, ..
(2)
Destructive devices.
In the case of a destructive device, the Director may authorize other means of identification to identify that weapon upon receipt of a letter application or prescribed form from you. The application shall show that engraving, casting, or stamping (impressing) such a weapon as required by this section would be dangerous or impracticable and that the alternate means of identification proposed will not hinder the effective admin..
Where the transfer of a destructive device, machine gun, short-barreled shotgun, or short-barreled rifle is to be made by a person licensed under the provisions of Title I of the Gun Control Act of 1968 (82 Stat. 1213) to a person not so licensed, the sworn statement required by § 478.98 of this chapter shall be attached to and accompany the transfer application required by this subpart.
The provisions of § 478.98 with respect to the sale or delivery of destructive devices, machine guns, short-barreled shotguns, and short-barreled rifles shall not apply to the sale or delivery of such devices and weapons to any research organization designated by the Director to receive same. A research organization desiring such designation shall submit a letter application, in duplicate, to the Director. Such application shall contain the name and address of the research organization, the name..
The provisions in this part are in addition to, and are not in lieu of, any other provision of law, or regulations, respecting commerce in firearms or ammunition. For regulations applicable to traffic in machine guns, destructive devices, and certain other firearms, see Part 479 of this chapter. For statutes applicable to the registration and licensing of persons engaged in the business of manufacturing, importing or exporting arms, ammunition, or implements of war, see section 38 of the Arms Ex..
For provisions relating to commerce in firearms and ammunition, including the movement of destructive devices, machine guns, short-barreled shotguns, or short-barreled rifles, see 18 U.S.C. Chapter 44, and Part 478 of this chapter issued pursuant thereto.
This part contains the procedural and substantive requirements relative to the importation, manufacture, making, exportation, identification and registration of, and the dealing in, machine guns, destructive devices and certain other firearms under the provisions of the National Firearms Act (26 U.S.C. Chapter 53).
The provisions in this part are in addition to, and are not in lieu of, any other provision of law, or regulations, respecting commerce in explosive materials. For regulations applicable to commerce in firearms and ammunition, see Part 478 of this chapter. For regulations applicable to traffic in machine guns, destructive devices, and certain other firearms, see Part 479 of this chapter. For statutes applicable to the registration and licensing of persons engaged in the business of manufacturing..
(e) Naval nuclear propulsion plants, their land prototypes and special facilities for their construction, support and maintenance. This includes any machinery, device, component, or equipment specifically developed or designed or modified for use in such plants or facilities.
(a) General. No person, other than a licensee or permittee knowingly may transport, ship, cause to be transported, or receive any explosive materials: Provided, That the provisions of this paragraph (a) do not apply to the lawful purchase by a nonlicensee or nonpermittee of commercially manufactured black powder in quantities not to exceed 50 pounds, if the black powder is intended to be used solely for sporting, recreational, or cultural purposes in antique firearms as defined in 18 U.S.C. 921(..
(a)
Basis for action.
Whenever the Director has reason to believe that a licensee has willfully violated any provision of the Act or this part, a notice of revocation of the license, ATF Form 4500, may be issued. In addition, a notice of revocation of the license, on ATF Form 4500, may be issued whenever the Director has reason to believe that a licensee fails to have secure gun storage or safety devices available at any place in which firearms are sold ..
(b)
Firearm muffler or silencer frame or receiver.
The terms "frame" and "receiver" shall mean, in the case of a firearm muffler or firearm silencer, the part of the firearm, such as an outer tube or modular piece, that provides housing or a structure for the primary internal component designed to reduce the sound of a projectile (
i.e.,
baffles, baffling material, expansion chamber, or equivalent). In the c..